Handleiding Samsung UA40F5020AR LED televisie

Handleiding

Security

✎

The PIN input screen appears before the setup screen.

✎ Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the

PIN using the Change PIN option.

 Channel Lock: Lock channels in Channel List, to prevent

unauthorized users, such as children, from watching unsuitable

programme.

✎ Only available when the Input source is set to TV.

 Change PIN: Change your password required to set up the TV.

✎ If you forget the PIN code, press the remote control buttons in

the following sequence in Standby mode, which resets the PIN to

“0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

Eco Solution

■

Energy Saving

t

: This adjusts the brightness of the TV in order

to reduce power consumption. If you select Picture Off, the screen is

turned off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

Eco Sensor

For 5 series

: To enhance your power savings; the

picture settings will automatically adapt to the light in the room.

✎ If you adjust the Backlight, the Eco Sensor will be set to Off.

Min. Backlight: When Eco Sensor is On, the minimum screen

brightness can be adjusted manually.

✎ If Eco Sensor is On, the display brightness may change (become

slightly darker in most cases) depending on the surrounding light

intensity.

■

No Signal Power Off: To avoid unnecessary energy consumption, set

how long you want the TV to remain on if it’s not receiving a signal.

✎ Disabled when the PC is in power saving mode.

■

Auto Power Off: The TV will be automatically turned off when no user

operation is received for 4 hours.

Auto Protection Time

■

Auto Protection Time: If the screen remains idle with a still image

for a certain period of time defi ned by the user, the screen saver is

activated to prevent the formation of ghost images on the screen.

General

■

Game Mode: When connecting to a game console such as

PlayStation™ or Xbox™, you can enjoy a more realistic gaming

experience by selecting the game mode.

 Precautions and limitations for game mode

− To disconnect the game console and connect another external

device, set Game Mode to Off in the setup menu.

− If you display the TV menu in Game Mode, the screen shakes

slightly.

 Game Mode is not available in TV mode.

 After connecting the game console, set Game Mode to On

to prevent poor picture quality. Unfortunately, you may notice

reduced picture quality.

■

Melody: Set so that a melody plays when the TV is turned Off, Low,

Medium and High.

✎ The Melody does not play.

− When no sound is output from the TV because the MUTE

button has been pressed.

− When no sound is output from the TV because the volume has

been reduced to minimum with the VOL – button.

− When the TV is turned off by Sleep Timer function.

Application Menu

❑ Using the Media Play

Enjoy photos, music and/or movie fi les saved on a

USB Mass Storage Class (MSC) device.

P

POWER

MEDIA.P

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie fi les to

the USB jack on the side of the TV.

3. When USB is connected to the TV, you can select Media Play.

Using the Media Play Menu

1. Press the MENU button. Press the ▲ or ▼ button to select

Application, then press the ENTER

E

button.

2. Press the ▲ or ▼ button to select Media Play (USB), then press the

ENTER

E

button.

3. Press the ◄ or ► button to select an icon (Videos, Music, Photos,

Settings), then press the ENTER

E

button.

✎ It might not work properly with unlicenced multimedia files.

✎ If you want to view detailed information of the file or connected

device, press TOOLS button in the file list, and then select Detailed

Information or Device Information.

✎ Need-to-Know List before using Media Play (USB)

• Supported fi le systems are FAT and NTFS.

• Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

• Media Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s

USB port. (LED 4000, 4001, 4020 series 32" : USB HDD is not

supported.)

• Before connecting your device to the TV, please back up your fi les

to prevent them from damage or loss of data. SAMSUNG is not

responsible for any data fi le damage or data loss.

• A USB device that requires high power may not be supported.

(LED 4000, 4001, 4020 series 32" : 0.5A)

(LED 5 series / LED 4100, 4105, 5100, 5105 models 32" and

above: 1A)

• Do not disconnect the USB device while it is loading.

• The higher the resolution of the image, the longer it takes to

display on the screen.

• The maximum supported JPEG resolution is 15360 x 8640 pixels.

• If a fi le is corrupted or the TV does not support the fi le type, the “Not

Supported File Format” message appears.

• If a USB extension cable is used, the USB device may not be

recognized or the fi les on the device may not be read.

• The TV cannot play MP3 fi les with DRM that have been downloaded

from a for-pay site. Digital Rights Management (DRM) is a

technology that supports the creation, distribution, and management

of digital content in an integrated and comprehensive way, including

protecting the rights and interests of content providers, preventing

illegal copying of contents, and managing billings and settlements.

• PTP device is not supported.

• If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

recognized or may malfunction.

• If the TV has no input during the time set in Auto Protection Time,

the Screensaver will run.

• The power-saving mode of some external hard disk drives may be

released automatically when your connect them to the TV.

• If a USB device connected to the TV is not recognized, the list of

fi les on the device is corrupted, or a fi le in the list is not played,

connect the USB device to a PC, format the device, and check the

connection.

• If a fi le you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to

permanently delete the fi le.

• Photos only supports sequential jpeg format.

• The scene search and thumbnail functions are not supported in the

Videos.

• If the number of fi les and folders saved on a USB storage device is

approximately over 4000, the fi les and folders may not appear and

some folders may not be opened.

• The maximum displayed number of fi les, including sub folders, in

one folder of USB storage device is 2000.

• The media may not be playing smoothly when using the device

lower than USB 2.0.

• The fi le name only works in supported menu language. The other

language is not displayed properly.

■

Videos

1. Press the ◄ or ► button to select Videos, then press the ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ buttons to select the desired video in the fi le list.

3. Press the ENTER

E

button or (Play) button.

- The selected file is displayed on the top with its playing time.

- If video time information is unknown, playing time and the progress

bar are not displayed.

- During video playback, you can search using the ◄ and ► button.

- You can use ( ) (REW) and ( ) (FF) buttons during playback.

✎ In this mode, you can play movie clips contained in a game, but you

cannot play the game itself.

 Supported Subtitle Formats

- External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

- Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

 Supported Video Formats

File

Extension

Container Video Codec Resolution

Frame

rate(fps)

Bit rate(Mbps) Audio Codec

*.mp4 MP4

DivX 3.11/4.x/5.1/6.0 1920x1080 6~30 30Mbps

MP3 / ADPCM

/ AAC

H264 1920x1080 6~30 30Mbps

AVC 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

*.avi

*.mkv"

"AVI

MKV"

DivX 3.11/4.x/5.1/6.0 1920x1080 6~30 30Mbps

MP3 / AC3 /

LPCM / ADPCM

/ DTS Core

MPEG4 SP / ASP 1920x1080 6~30 30Mbps

H264 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

*.asf

*.wmv

ASF

DivX 3.11 / 4.x /5.1 / 6.0 1920x1080 6~30 30Mbps

MP3 / AC3 /

LPCM /ADPCM /

WMA / WMA Pro

MPEG4 SP / ASP 1920x1080 6~30 30Mbps

H.264 1920x1080 6~30 30Mbps

*.ts

*.trp

*.tp

*.m2ts

TS

MPEG2 1920x1080 6~30 30Mbps

AC3 / AAC /

MP3 / DD+ /

HE-AAC

H. 264 BP / MP / HP 1920x1080 6~30 30Mbps

*.dat

*.mpg

*.mpeg

*.vob

PS

MPEG1 1920x1080 24/25/30 30Mbps

AC3 / MPEG /

LPCM / AAC

MPEG2 1920x1080 24/25/30 30Mbps

H. 264 BP / MP / HP 1920x1080 6~30 30Mbps

*.3gp 3GPP

MPEG4 SP / ASP 1920x1080 6~30 30Mbps

MP3

H.264 1920x1080 6~30 30Mbps

*.fl v

fl ash

formats

H.264 1920x1080 6~30 30Mbps

MP3

Sorenson H.263 1920x1080 6~30 30Mbps

Other Restrictions

 Video content will not play, or not play correctly, if there is an error in the

content or the container.

 Sound or video may not work if the contents have a standard bit rate/

frame rate above the compatible Frame/sec listed in the table above.

 If the Index Table is in error, the Seek (Jump) function is not supported.

 The menu may take longer to appear if the video’s bit rate exceeds

10Mbps.

 Video content can not be played, if there are many contents in one fi le.

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

H.263 is not supported.

GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not

supported)

WMA Lossless is not supported.

■

Music

1. Press the ◄ or ► button to select Music, then press the ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ buttons to select the desired Music in the fi le list.

3. Press the ENTER

E

button or (Play) button.

✎ During music playback, you can search using the ◄ and ► button.

✎

(REW) and (FF) buttons do not function during play.

✎ Only displays the files with MP3 file extension. Other file extensions are

not displayed, even if they are saved on the same USB device.

✎ If the sound is abnormal when playing MP3 files, adjust the Equalizer

in the Sound menu. (An over-modulated MP3 file may cause a sound

problem.)

■

Photos

1. Press the ◄ or ► button to select Photos, then press the ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ buttons to select the desired photo in the fi le list.

3. Press the ENTER

E

button or (Play) button.

✎ NOTE

 While a photo list is displayed, press the (Play) / ENTER

E

button

on the remote control to start the slide show.

 All files in the file list section will be displayed in the slide show.

 During the slide show, files are displayed in order.

 During the slide show, you can adjust the slide show speed using ( )

(REW) or (

) (FF) button.

 You can move to other file using ◄ or ► button.

✎ Music files can be automatically played during the Slide Show if the

Background Music is set to On.

✎ The Mode in Background Music cannot be changed until the BGM

has finished loading.

 Supported Photo Formats

Image Photo Resolution

JPEG

Base-line 15360 x 8704

Progressive 1024 x 768

■

Other Restrictions

CMYK, YCCK Colour space JPEG are not supported.

■

Playing Multiple Files

Playing selected video/music/photo fi les

1. Press the Yellow button in the fi le list to select the desired fi le.

2. Repeat the above operation to select multiple fi les.

✎ NOTE

 The

c

mark appears to the left of the selected files.

 To cancel a selection, press the Yellow button again.

 To deselect all selected files, press the TOOLS button and select

Deselect All.

3. Press the TOOLS button, and then select Play Selected Contents.

■

Playing the video/music/photo fi le group

While a fi le list is displayed, move to any fi le in desired group.

■

Copying the fi les to the other USB device

For 4100 / 4105 / 5100 / 5105 models

1. Press the Yellow button in the fi le list to select the desired fi le.

2. When you press the green button, the selected fi les copy to the other

USB device.

✎ Available only when both USB devices are connected to the TV.

✎ The FAT32 file system cannot copy the file which size is more than

4GB.

USB Support File System

Play (Read) NTFS, FAT, FAT32

Copy & Delete FAT, FAT32

Format FAT32 Only

■

Media Play - Additional Functions

Videos/Music/Photos Play Option menus

When playing a fi le, press the TOOLS button.

Category Operation Videos Music Photos

Title You can move the other fi le directly.

c

Repeat Mode

You can play movie and music fi les

repeatedly.

c c

Picture Size

You can adjust the picture size to your

preference.

c

Picture Mode You can adjust the picture setting.

c c

Sound Mode You can adjust the sound setting.

c c c

Subtitle Setting

You can play the video with Subtitles. This

function only works if the subtitles are the

same fi le name as the video.

c

Audio Format

You can select the digital audio output

format.

c

Audio Language

You can change the audio language if the

video has more than one language.

c

Category Operation Videos Music Photos

Stop Slide Show

/ Start Slide

Show

You can start or stop a Slide Show.

c

Slide Show

Speed

You can select the slide show speed

during the slide show.

c

Background

Music

You can set and select background music

when watching a Slide Show.

c

Zoom

You can zoom into images in full screen

mode.

c

Rotate You can rotate images in full screen mode.

c

Information

You can see detailed information about

the played fi le.

c c c

■

Settings

Using the Setup Menu

 DivX® Video On Demand: Shows the registration code authorized for

the TV. If you connect to the DivX web site and register with 10-digit

registration code, you can download the VOD activation fi le. Once you

play it using Media Play, the registration is completed.

✎ For more information on DivX® VOD, visit http://vod.divx.com.

 Device Format

For 4100 / 4105 / 5100 / 5105 models

: Format the Storage Media.

 Information: Select to view information on the connected device.

❑ Using the Sports Mode

Sports Mode

t

This mode provides optimised condition for watching sports games.

✎ When Sports Mode is On, the picture and sound modes are set to

Stadium automatically.

✎ If you turn the TV off while watching Sports Mode, the Sports Mode

will be disable.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

continues to occur, check the colour pattern.

■

Sound Test: Use the built-in melody sound to check for sound

problems.

■

Reset: Reset all settings to the factory defaults.

✎ The PIN input screen appears before the setup screen.

✎ Enter your 4-digit PIN. Change the PIN using the Change PIN

option.

Software Upgrade

Software Upgrade can be performed by downloading the latest fi rmware

from “www.samsung.com” to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you

want to upgrade the software. You can fi nd information regarding our call

centres, and how to download products and software.

Other Information

Installing the Wall Mount

The wall mount kit (sold separately) allows you to mount the TV on

the wall. For detailed information on installing the wall mount, see the

instructions provided with the wall mount. Contact a technician for

assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product

or injury to yourself or others if you elect to install the TV on your own.

Wall Mount Kit Specifi cations (VESA)

✎ The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the fl oor. When

attaching to other building materials, please contact your nearest dealer.

If you install the TV on a ceiling or slanted wall, it may fall and result in

severe personal injury.

✎ NOTE

• Standard dimensions for wall mount kits are shown in the table

below.

• When purchasing our wall mount kit, a detailed installation manual

and all parts necessary for assembly are provided.

• Do not use screws that do not comply with the VESA standard

screw specifi cations.

• Do not use screws longer than the standard dimension, as they

may cause damage to the inside of the TV set.

• For wall mounts that do not comply with the VESA standard screw

specifi cations, the length of the screws may differ depending on

the wall mount specifi cations.

• Do not fasten the screws too fi rmly. This may damage the product

or cause the product to fall, leading to personal injury. Samsung is

not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when

a non-VESA or non-specifi ed wall mount is used or the consumer

fails to follow the product installation instructions.

• Do not mount the TV at more than a 15 degree tilt.

• Always have two people mount the TV on a wall.

Product

Family

Models

VESA scew hole specs

(A * B) in millimeters

Standard

Screw

Quantity

LED-TV

UA32F4000 / UA32F4001 /

UA32F4100 / UA32F4020 /

UA32F4105 / UA32F5000 /

UA32F5100 / UA32F5105 /

UA40F5000 / UA40F5020 /

UA40F5100 / UA40F5105

200 X 200

M8 4

UA46F5000 / UA46F5020 /

UA46F5100 / UA50F5000

400 X 400

Do not install your Wall Mount

Kit while your TV is turned on.

It may result in personal injury

due to electric shock.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause

the TV to fall. In particular, ensure that your children do not hang

over or destabilize the TV; doing so may cause the TV to tip over,

resulting in serious injuries or death. Follow all safety precautions

provided on the included Safety Flyer. For added stability, install

the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

✎ Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

1. Put the screws into the clamps and fi rmly fasten them onto the wall.

Confi rm that the screws have been fi rmly installed onto the wall.

✎ You may need additional material such as an anchor depending on

the type of wall.

✎ Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

2. Remove the screws from the back Centre of the TV, put the screws

into the clamps, and then fasten the screws onto the TV again.

✎ Screws may not be supplied with the product. In this case, please

purchase the screws of the following specifications.

3. Connect the clamps fi xed onto the TV and the clamps fi xed onto the

wall with a strong cable and then tie the string tightly.

✎ Note

 Install the TV near to the wall so that it does not fall backwards.

 It is safe to connect the string so that the clamps fixed on the wall

are equal to or lower than the clamps fixed on the TV.

 Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check

connections for any sign of fatigue for failure. If you have any doubt

about the security of your connections, contact a professional

installer.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used

to physically fi x the system when using it in a public place. Refer to the

manual provided with the Kensington Lock for additional information on

proper use.

✎ Please find a “

K

” icon on the rear of the TV. The Kensington slot is

beside the “

K

” icon.

✎ The position and colour may differ depending on the model.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object

such as desk or chair.

2. Slide the end of the cable with the lock attached through the looped

end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the product.

4. Lock the lock.

✎ These are general instructions. For exact instructions, see the User

manual supplied with the locking device.

✎ The locking device has to be purchased separately.

✎ The location of the Kensington slot may be different depending on

the TV model.

Caution of the cover-jack

Caution

Caution: The cover-jack is for use by qualifi ed service personnel

only. To reduce the risk of electric shock or fi re hazard, do not

use the cover jack, unless you are qualifi ed to do so.

TV Rear Panel

Cover-jack

✎ The rear panel may differ depending on the model.

Troubleshooting

If you have any questions about the TV, fi rst refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click

on Support, or contact the call centre listed on the back-cover of this manual.

Problem Possible Solution

Picture Quality

The TV image does not look as good as it

did in the store.

 If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD

(high defi nition) picture quality.

 Cable/Satellite subscribers: Try HD stations from the channel line up.

 Antenna connection: Try HD stations after performing Auto tuning.

✎ Many HD channels are up scaled from SD(Standard Definition) contents.

 Adjust the Cable/Set top box video output resolution to 1080i or 720p.

 Make sure you are watching the TV at the minimum recommended distance based on the size and defi nition of the signal.

The picture is distorted: macroblock error,

small block, dots, pixelization

 Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action

movies.

 Low signal level or bad quality can cause picture distortion. This is not a TV issue.

 Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.

Colour is wrong or missing.  If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or

loose connections may cause colour problems or a blank screen.

There is poor colour or brightness.  Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)

 Adjust Energy Saving option in the TV menu. (go to MENU - Setup -Eco Solution - Energy Saving)

 Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)

There is a dotted line on the edge of the

screen.

 If the picture size is set to Screen Fit, change it to 16:9.

 Change cable/satellite box resolution.

The picture is black and white.  If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.

When changing channels, the picture

freezes or is distorted or delayed.

 If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box

reboots. It may take up to 20 minutes.

 Set the output resolution of the cable box to 1080i or 720p.

Sound Quality

There is no sound or the sound is too low at

maximum volume.

 Please check the volume the of external device connected to your TV.

The picture is good but there is no sound.  Set the Speaker Select option to TV Speaker in the sound menu.

 If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.

 If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s

audio option to HDMI when you have a HDMI connected to your TV).

 If you are using a HDMI cable, a separate audio cable is required.

 If your TV has a headphone jack, make sure there is nothing plugged into it.

The speakers are making an inappropriate

noise.

 Check the cable connections. Make sure a video cable is not connected to an audio input.

 For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.

No Picture, No Video

The TV will not turn on.  Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

 Make sure the wall outlet is working.

 Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The

remote control does not work” below.

The TV turns off automatically.  Ensure the Sleep Timer is set to Off in the Time menu.

 If your PC is connected to the TV, check your PC power settings.

 Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

 When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.

There is no picture/video.  Check cable connections (remove and reconnect all cables connected to the TV and external devices).

 Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.

For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

 Make sure your connected devices are powered on.

 Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.

Problem Possible Solution

RF(Cable/Antenna) Connection

The TV is not receiving all channels.  Make sure the Antenna cable is connected securely.

 Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup) and

wait for all available channels to be stored.

 Verify the Antenna is positioned correctly.

The picture is distorted: macroblock error,

small block, dots, pixelization

 Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action

movies.

 A low signal can cause picture distortion. This is not a TV issue.

PC Connection

A “Mode Not Supported” message

appears.

 Set your PC’s output resolution so it matches the resolutions supported by the TV.

The video is OK but there is no audio.  If you are using a HDMI connection, check the audio output setting on your PC.

Others

The picture will not display in full screen.  HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

 Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

 Adjust the picture size options on your external device or TV to full screen.

The remote control does not work.  Replace the remote control batteries with the poles (+/–) in the right direction.

 Clean the transmission window located on the top of the remote control.

 Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

does not turn the TV on or off, or adjust

the volume.

 Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the

SAMSUNG TV code.

A “Mode Not Supported” message

appears.

 Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution

settings in this manual.

There is a plastic smell from the TV.  This smell is normal and will dissipate over time.

TV is tilted to the right or left side.  Remove the stand base from the TV and reassemble it.

There are diffi culties assembling the stand

base.

 Make sure the TV is placed on a fl at surface. It is necessary to use magnetized screw driver if you cannot remove the screws

from the TV.

The Broadcasting menu is grey out

(unavailable).

 The Broadcasting menu is only available when the TV source is selected.

Your settings are lost after 30 minutes or

every time the TV is turned off.

 If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. If you want to change the settings

from Store Demo mode to Home Use, press the SOURCE button to select TV mode, and go to MENU → Support → Use

Mode.

You have intermittent loss of audio or video.  Check the cable connections and reconnect them.

 Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are fl exible enough for long

term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look

closely at the edge of the frame of the TV.

 This is part of the product’s design and is not a defect.

There are recurrent picture/sound issues.  Check and change the signal/source.

A reaction may occur between the rubber

cushion pads on the base stand and the

top fi nish of some furniture.

 To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or

dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎ You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.

Storage and Maintenance

✎

If you remove the attached sticker on the TV screen, clean the residues and then watch TV.

Do not spray water directly onto the product. Any liquid that goes into the

product may cause a failure, fi re, or electric shock.

Clean the product with a soft cloth dampened with in a small amount of water.

Do not use a fl ammable liquid (e.g. benzene, thinners) or a cleaning agent.

License

DivX Certifi ed® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an offi cial DivX Certifi ed® device that plays DivX video. Visit

divx. com for more information and software tools to convert your fi les into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed® device must be registered in

order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com

for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX

Certifi ed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,

7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS

Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976,

7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are

registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC

in the United States and other countries.

Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only English.

Specifi cations

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

Model Name

UA32F4000 / UA32F4001 / UA32F4100 / UA32F4105 UA32F4020

Display Resolution 1366 x 768

Screen Size 81 cm

Sound

Output

10W x 2

Dimensions (W x H x D)

Body

With Stand (Square)*

With stand (Round)*

73.7 X 44.0 X 4.9 (cm)

73.7 X 50.9 X 19.1 (cm)

73.7 X 48.7 X 25.2 (cm)

73.7 X 44.0 X 4.9 (cm)

-

73.7 X 48.7 X 25.2 (cm)

Weight

Without Stand

With Stand (Square)*

With stand (Round)*

5.2 kg

5.7 kg

5.6 kg

5.2 kg

-

5.6 kg

Model Name

UA32F5000 / UA32F5100 /

UA32F5105

UA40F5000 / UA40F5020 /

UA40F5100 / UA40F5105

UA46F5000 / UA46F5020 /

UA46F5100

UA50F5000

Display Resolution 1920 x 1080

Screen Size 81 cm 102 cm 117 cm 126 cm

Sound

Output

10W x 2

Dimensions (W x H x D)

Body

With stand

73.8 X 44.5 X 4.9 (cm)

73.8 X 50.5 X 19.1 (cm)

92.8 X 55.2 X 4.9 (cm)

92.8 X 61.2 X 23.5 (cm)

105.9 X 62.6 X 4.9(cm)

105.9 X 68.6 X 23.5 (cm)

113.5 X 66.8 X 4.9 (cm)

113.5 X 72.7 X 23.5 (cm)

Weight

Without Stand

With Stand

5.0 kg

5.6 kg

8.0 kg

9.5 kg

10.8 kg

12.3 kg

13.0 kg

14.5 kg

✎ Design and specifications are subject to change without prior notice.

✎ For information about the power required and more about power consumption, refer to the label attached to the product.

✎ * The option may differ depending on country.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fi re or a problem with the product due to an increase in the internal temperature of the product.

✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.

 If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎ The appearance may differ depending on the product.

✎ Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

10 cm

10 cm

10 cm

10 cm

10 cm

10 cm

10 cm

- 10 - - 9 -

- 14- - 13 -

- 11 -

- 15 -

- 12 -

- 16 -

[UF4000-UF5000-AR]BN68-04908U-00ENG.indd 2 2013-11-01  11:14:01

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Samsung UA40F5020AR LED televisie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Samsung. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Samsung UA40F5020AR LED televisie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Samsung LED televisies
Meer handleidingen voor LED televisies

Veelgestelde vragen over Samsung UA40F5020AR LED televisie

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Samsung UA65H7000AR LED televisie

Handleiding

Samsung UE65NU7025K LED televisie

Handleiding

Samsung UE43AU7020K LED televisie

Handleiding

Samsung UE43AU7040K LED televisie

Handleiding

Samsung QE55Q74BAT LED televisie

Handleiding

Samsung UE65KU6689U LED televisie

Handleiding

Samsung UE65MU6102K LED televisie

Handleiding

Samsung UA32ES5600K LED televisie

Gerelateerde categorieën