Handleiding Sony Bravia KLV-46R472A LCD televisie

Handleiding

~

• When “1 Digit Direct” is set to “On”, you cannot select

channel numbers 10 and above entering next digit using

the remote.

Auto Tuning

Tunes in all the available channels.

Programme

Sorting

Changes the order in which the

channels are stored on the TV.

Programme

Labels

Assigns a channel name of your choice

up to seven letters or numbers.

Manual

Programme

Preset

Sets programme channels manually.

~

• In “Audio Filter”, you cannot receive stereo or dual sound

when “High” is selected.

FM Radio

Set-up

Preset up to 30 FM radio stations that

can be received in your area.

Parental Lock

PIN Code

Sets up TV to block channel or external

input. Use 0-9 on the remote to enter a

four-digit PIN code.

Change PIN

Code

Selects to change your PIN code.

Programme

Block

Blocks an individual channel from

being watched. To view a blocked

channel, select “Unblocked”.

External Input

Lock

Locks an external input from being

watched. To view a blocked external

input, select “Unblocked”.

~

• Entering the correct PIN code for blocked channel or

external input will temporarily deactivates the “Parental

Lock” feature. To reactivate the “Parental Lock” settings,

turn off and on the TV.

z

• If you lost your PIN code, refer to (Troubleshooting).

Set-up

Photo Frame

Settings*

Sets desired displays, image or music

selection during “Photo Frame Mode”.

USB Auto

Start

Automatically enters the thumbnail view

of the last played Photo/Music/Video

when the TV is turned on and a USB

device is connected to the USB port

then turned on.

Sleep Timer *

Set the time in minutes that you would

like the TV to remain on before shutting

off automatically.

Clock/

Timers *

Sets the timer to turn on/off the TV

using “Sleep Timer”, “On Timer”, and

“Clock Set”

* Available depending on the TV model.

Auto Start-up

Starts the initial set-up procedure.

Language

Selects the language in which the

menus are displayed.

Start-up

Logo

Select “On” to display logo when the

TV is turned on. Select “Off” to disable

it.

AV Set-up

Selects settings for connected

equipment or input source.

~

• When the input source is set to “Skip” in the “Video

Labels” under the “AV Set-up” menu, that input is

greyed out in the list.

BRAVIA Sync

Settings

Allows the TV to communicate with

equipment that is compatible with the

BRAVIA Sync Control function, and

connected to the HDMI jacks of the

TV. Note that communication settings

must also be made on the connected

equipment.

~

• You cannot use “BRAVIA Sync Control” if the TV

operations are linked to the operations of an audio

system that is compatible with BRAVIA Sync Control.

• Some equipment with “BRAVIA Sync Control” does not

support the “Device Control” feature.

Product

Information

Displays your TV’s product information.

Factory

Settings

Resets all settings to factory settings.

After completing this process, the initial

set-up screen is displayed.

Eco

Reset

Resets the current Eco settings to the

default values.

Power Saving

Reduces power consumption of the TV

by adjusting the backlight.

Idle TV

Standby

Turns the TV off after it has been kept

idle for the preset length of time.

Specifications

System

Panel system

LCD (Liquid Crystal Display) Panel

TV system

B/G, I, D/K, M

Colour/video system

PAL, PAL60, SECAM, NTSC4.43, NTSC3.58

Channel Coverage

Analogue: UHF/VHF/Cable, depending on your

country/area selection.

Sound Output (Only for 19.5V supply)

8 W + 8 W (KLV-46/40R472A, KLV-46/40R452A,

KLV-40R457A, KLV-32R422A, KLV-32R407A,

KLV-32R402A)

5 W + 5 W (KLV-24R422A, KLV-24R402A)

Input/Output jacks

Antenna (aerial)/cable

75 ohm external terminal for VHF/UHF

COMPONENT IN/

AUDIO

YP

B

P

R

(Component Video): 1080p (50, 60Hz), 1080i

(50, 60Hz), 720p (50, 60Hz), 576p, 576i, 480p, 480i

Audio input (phono jacks)

VIDEO IN

Video input (common phono pin with Y input)

HDMI IN 1, 2

Video: 1080p (24, 30, 50, 60Hz), 1080i (50, 60Hz),

720p (24, 30, 50, 60Hz), 576p, 576i, 480p, 480i,

PC Formats

Audio: Two channel linear PCM: 32, 44.1 and 48kHz,

16, 20 and 24 bits, Dolby Digital

Audio input (stereo minijack) (HDMI IN 1 only)

ARC (Audio Return Channel) (HDMI IN 1 only)

MHL (common with HDMI IN or HDMI IN 2)

Video: 1080p (24, 30Hz), 1080i (50, 60Hz), 720p

(24, 30, 50, 60Hz), 576p, 576i, 480p, 480i

Audio: Two channel linear PCM: 32, 44.1 and 48kHz,

16, 20 and 24 bits, Dolby Digital

AUDIO OUT/i

Audio output (stereo minijack)

Headphones jack

HDMI AUDIO IN or HDMI 2 AUDIO IN

Audio input (stereo minijack) (common for HDMI IN or

HDMI IN 2)

USB port

AC adapter input: 19.5 V

DC input: 12 V (depends on country)

Others

Optional accessories

Wall-Mount Bracket: SU-WL400

Operating temperature

0 °C - 40 °C

Operating humidity

10 % - 80 % RH (non-condensing)

Power and others

Power requirements

110-240 V AC, 50/60 Hz

Screen size (measured diagonally) (Approx.)

KLV-46R472A, KLV-46R452A: 116.8 cm/46 inches

KLV-40R472A, KLV-40R45xA: 101.6 cm/40 inches

KLV-32R422A, KLV-32R40xA: 80.0 cm/32 inches

KLV-24R422A, KLV-24R402A: 59.8 cm/24 inches

Display resolution

KLV-46R472A, KLV-46R452A, KLV-40R472A,

KLV-40R45xA: 1,920 dots (horizontal) × 1,080 lines

(vertical)

KLV-32R422A, KLV-32R40xA, KLV-24R422A,

KLV-24R402A: 1,366 dots (horizontal) × 768 lines

(vertical)

Power consumption

KLV-46R472A: 77 W, KLV-46R452A: 77 W

KLV-40R472A: 76 W, KLV-40R45xA: 76 W

KLV-32R422A: 52 W, KLV-32R40xA: 52 W

KLV-24R422A: 41 W, KLV-24R402A: 41 W

Dimensions (Approx.) (w × h × d)

with Table-Top Stand

KLV-46R472A: 1,054 × 649 × 204 mm

KLV-46R452A: 1,054 × 643 × 181 mm

KLV-40R472A: 924 × 573 × 184 mm

KLV-40R45xA: 924 × 568 × 181 mm

KLV-32R422A: 735 × 464 × 171 mm

KLV-32R40xA: 735 × 461 × 163 mm

KLV-24R422A: 558 × 366 × 153 mm

KLV-24R402A: 558 × 363 × 140 mm

without Table-Top Stand

KLV-46R472A, KLV-46R452A: 1,054 × 625 × 77 mm

KLV-40R472A, KLV-40R45xA: 924 × 551 × 77 mm

KLV-32R422A, KLV-32R40xA: 735 × 443 × 75 mm

KLV-24R422A, KLV-24R402A: 558 × 346 × 69 mm

Mass (Approx.)

with Table-Top Stand

KLV-46R472A: 9.1 kg, KLV-46R452A: 9.2 kg

KLV-40R472A: 7.0 kg, KLV-40R45xA: 7.1 kg

KLV-32R422A: 4.8 kg, KLV-32R40xA: 4.8 kg

KLV-24R422A: 4.6 kg, KLV-24R402A: 4.5 kg

without Table-Top Stand

KLV-46R472A, KLV-46R452A: 8.8 kg

KLV-40R472A, KLV-40R45xA: 6.7 kg

KLV-32R422A, KLV-32R40xA: 4.6 kg

KLV-24R422A, KLV-24R402A: 4.4 kg

~

• Design and specifications are subject to change without

notice.

Installing the

Accessories

(Wall-Mount Bracket)

To Customers

Sufficient expertise is required for installing this

product. Be sure to subcontract the installation

to Sony dealers or licensed contractors and pay

special attention to safety during the installation.

Sony is not liable for any damages or injury caused

by mishandling or improper installation, or installing

any other than the specified product. Your Statutory

Rights (if any) are not affected.

To Sony Dealers and Contractors

Sufficient expertise is required for installing this

product. Be sure to read this instruction manual

thoroughly to do the installation work safely. Sony

is not liable for any damages or injury caused by

mishandling or improper installation.

Precautions

• Detach the Table-Top Stand from the TV. For details, refer

to (Detaching the Table-Top Stand from the TV).

• When your TV is installed on the wall, make sure to use L

shape connecting cable for

HDMI AUDIO IN or HDMI 2

AUDIO IN terminal and AUDIO OUT

/ terminal on the

rear of the TV.

To bundle the AC adapter

• You can bundle the AC adapter as an optional step. Do not

bundle it for any reason other than to wall-mount the TV.

• Make sure that the label is facing outwards when bundling

AC adapter.

11

22

33

44

x SU-WL400:

Your TV can be installed using the Wall-Mount Bracket

SU-WL400 (sold separately)

• Refer to the Instructions supplied with the Wall-Mount

Bracket to properly carry out the installation.

Spacer

*

1

Screws

*

2

Screws

Band

Pulley

Thick and

soft cloth

*

1

KLV-46/40R472A, KLV-46/40R452A, KLV-40R457A,

KLV-32R422A, KLV-32R407A, KLV-32R402A:

Use (+PSW 6 × 20) screws

*

1

KLV-24R422A, KLV-24R402A:

Use (+PSW 4 × 20) screws

*

2

KLV-46/40R472A, KLV-46/40R452A, KLV-40R457A,

KLV-32R422A, KLV-32R407A, KLV-32R402A:

Use (+PSW 6 × 50) screws

*

2

KLV-24R422A, KLV-24R402A:

Use (+PSW 4 × 50) screws

TV installation dimensions table

Screen centre point

d

e

c

a

b

Unit: mm

KLV-

46R472A/

46R452A

1,054 625 -49 273 141

40R472A/

40R457A/

40R452A

924 551 -13 273 140

32R422A/

32R407A/

32R402A

735 443 42 273 138

24R422A/

24R402A

558 346 88 268 117

x KLV-46/40R472A, KLV-32/24R422A:

Your TV’s Table-Top Stand will be used as a part of the

Wall-Mount Bracket.

• Refer to (Safety Information) and (Precautions) on WALL-

MOUNT BRACKET before carrying out Wall-Mount Bracket

Installation.

Checking the accessories

Wall-Mount Base (1)

Stand Protector (1)

Bracket Cap Plate (1)

Arm Bracket (2)

Assembling screws for Wall-Mount Bracket

(+PSW 6 x12) (2)

(KLV-46/40R472A, KLV-32R422A)

Assembling screws for Wall-Mount Bracket

(+PSW 4 x10) (2)

(KLV-24R422A)

Spacer (2)

Fixing screw for Bracket Cap Plate (+PSW 4 x 10) (1)

(KLV-46/40R472A, KLV-32/24R422A)

~

• The screws needed to secure the Wall-Mount Base to the

wall are not supplied.

Installing the Brackets on the wall

Wall-Mount

Base

Screws

(8 mm in

diameter,

not supplied)

Preparing for the installation of

the TV

~

• Once the Stand Necks are detached from the Stand, be

sure to keep the Stand Necks in a safe place.

1

L

R

Arm Bracket

Stand Necks

2

Stand Protector

Dowel

Stand

3

×

2

Spacer

Arm Bracket

* Screws

Soft cloth

* KLV-46/40R472A, KLV-32R422A:

Use (+PSW 6 × 12) screws

* KLV-24R422A:

Use (+PSW 4 × 10) screws

Installing the TV on the wall

1

Wall

Wall-Mount

Base

Wall-Mount

Base

~

• Make sure to connect and bundle the cables before

installing the TV on the wall.

2

Screw

(+PSW 4 × 10)

Bracket

Cap

Plate

Wall-Mount

Base

TV installation dimensions table

c

e

d

a

b

Screen centre point

Unit: mm

KLV-

46R472A

1,054 625 124 446 96

40R472A

924 551 187 472 96

32R422A

735 443 150 380 94

24R422A

558 346 144 324 88

WARNING

The wall that the TV will be installed on should be

capable of supporting a weight of at least four times

that of the TV. Refer to (Specifications) for its weight.

Troubleshooting

When the "/1 (standby) indicator is flashing, count

how many times it flashes (interval time is three

seconds).

Press "/1 on the TV to turn it off, disconnect the AC

power cord (mains lead), and inform your dealer

or Sony service centre of how the indicator flashes

(number of flashes).

When it is not flashing

Check the items listed below. If the problem still

persists, have your TV serviced by qualified service

personnel.

Picture

No picture and no sound

• Check the antenna/cable connection.

• Connect the TV to the AC power outlet (mains socket),

and press "/1 on the TV. If the "/1 (standby) indicator

lights up in red, press "/1.

No picture from the connected equipment

• Turn the connected equipment on.

• Check the connection between the optional equipment

and the TV.

• Press

repeatedly to select the desired input.

• Correctly insert the USB / MHL device.

• For USB device: Make sure that the USB device has

been properly formatted.

• For MHL device: Ensure that the MHL device is

connected to the HDMI IN / MHL or HDMI IN 2 / MHL

jack (depending on your TV model) using an MHL cable.

• Operations are not guaranteed for all USB / MHL devices.

Also, operations differ depending on the features of the

USB / MHL device.

Double images or ghosting

• Check the antenna/cable connection, location or

direction.

Only snow and noise appear on the screen

• Check if the antenna is broken or bent.

• Check if the antenna has reached the end of its

serviceable life (three to five years in normal use, one to

two years at the seaside).

Distorted picture (dotted lines or stripes)

• Keep the TV away from electrical noise sources such as

cars, motorcycles, hair-dryers or optional equipment.

• When installing optional equipment, leave some space

between the optional equipment and the TV.

• Check the antenna/cable connection.

• Keep the antenna/cable away from other connecting

cables.

Picture or sound noise when viewing a TV channel

• Adjust “AFT” (Automatic Fine Tuning) to obtain better

picture reception.

Tiny black points and/or bright points appear on

the screen

• The screen is composed of pixels. This is not a

malfunction.

Picture contours are distorted

• Change the current setting of “Cinema Drive” to other

settings.

No colour on programmes

• Select “Reset”.

Sound

No sound, but good picture

• Press 2 +/– or % (Mute).

• Check if the “Speakers” is set to “TV Speakers”.

No sound or noisy sound

• Check if the TV system setting is appropriate.

Channels

Some channels are blank

• The channel is for scrambled/subscription service only.

Subscribe to a pay TV service.

• Channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

General

The TV turns off automatically (the TV enters

standby mode)

• Check if the “Sleep Timer” is activated.

• Check if the “Idle TV Standby” is activated.

Some input sources cannot be selected

• Select “Video Labels” and cancel “Skip” of the input

source.

The remote does not function

• Replace the batteries.

HDMI equipment does not appear on “BRAVIA Sync

Device List”

• Check that your equipment is compatible with BRAVIA

Sync Control.

Cannot select “Off” in “BRAVIA Sync Control”

• If you have connected any audio system that is

compatible with BRAVIA Sync Control, you cannot select

“Off” in this menu. To change the audio output to the TV

speaker, select “TV Speakers” in the “Speakers” menu.

The “Parental Lock” password has been forgotten

• Press HOME and select “Settings” t ”Parental Lock” t

”PIN code” then enter 9999 for the PIN code (PIN code

9999 is always accepted.).

TV does not output picture and/or sound from the

MHL device

• Disconnect the MHL cable, then reconnect it, or power

the MHL device off then on again and release its lock.

Store Display Mode or Promoting Feature Logo

appears on the screen

• On the remote control, press RETURN then press HOME

and select “Settings” t “Set-up” t “Auto Start-up”. Be

sure to select “Home” in “Location”.

Safety information

WARNING

Batteries must not be exposed to excessive heat such as sunshine, fire

or the like.

Installation/Set-up

Install and use the TV set in accordance with the instructions below in

order to avoid any risk of fire, electrical shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible AC power

outlet (mains socket).

• Place the TV set on a stable, level surface to avoid it from falling down

and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall installations.

• For safety reasons, it is strongly recommended that you use Sony

accessories, including:

− Wall-Mount Bracket SU-WL400

− Be sure to use the screws supplied with the Wall-mount bracket

when attaching the mounting hooks to the TV set. The supplied

screws are designed as indicated by illustration when measured

from the attaching surface of the mounting hook. The diameter and

length of the screws differ depending on the Wall-mount bracket

model.

Use of screws other than those supplied may result in internal dam-

age to the TV set or cause it to fall, etc.

24" TV: 6.5 mm ~ 10 mm

32" / 40" / 46" TV: 8 mm ~ 12 mm

Screw (supplied with the

Wall-mount bracket)

Mounting Hook

Hook attachment on rear

of TV set

Transporting

• Before transporting the TV set, disconnect all cables.

• Two or more people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as

shown in the illustration. Do not put stress on the LCD

panel and the frame around the screen.

• When transporting the TV set, do not subject it to jolts

or excessive vibration.

• When transporting the TV set for repairs or when

moving, pack it using the original carton and packing material.

Ventilation

• Never cover the ventilation holes or insert anything in the cabinet.

• Leave space around the TV set as shown below.

• It is strongly recommended that you use a Sony wall-mount bracket in

order to provide adequate air-circulation.

Installed on the wall

30 cm

10 cm

10 cm

10 cm

Leave at least this space around

the set.

Installed with stand

30 cm

10 cm

10 cm 6 cm

Leave at least this space around

the set.

• To ensure proper ventilation and prevent the collection of dirt or dust:

− Do not lay the TV set flat, install upside down, backwards, or

sideways.

− Do not place the TV set on a shelf, rug, bed or in a closet.

− Do not cover the TV set with a cloth, such as curtains, or items such

as newspapers, etc.

− Do not install the TV set as shown below.

Air circulation is blocked.

WallWall

AC power cord (mains lead)

Handle the AC power cord (mains lead) and outlet (mains socket) as

follows in order to avoid any risk of fire, electrical shock or damage and/

or injuries:

− The shape of AC power plug, which is supplied with the TV set,

varies depending on the regions. Be sure to connect the appropriate

supplied AC power cord (mains lead) with the plug that fits into the AC

power outlet (mains socket).

− Use only Sony supplied AC power cords (mains lead), not those of

other brands.

− Insert the plug fully into the AC power outlet (mains socket).

− Operate the TV set on a 110–240 V AC supply only.

− When wiring cables, be sure to unplug the AC power cord (mains

lead) for your safety and take care not to catch your feet on the

cables.

− Disconnect the AC power cord (mains lead) from the AC power outlet

(mains socket) before working on or moving the TV set.

− Keep the AC power cord (mains lead) away from heat sources.

− Unplug the AC power plug (mains plug) and clean it regularly. If the

plug is covered with dust and it picks up moisture, its insulation may

deteriorate, which could result in a fire.

Notes

• Do not use the supplied AC power cord (mains lead) on any other

equipment.

• Do not pinch, bend, or twist the AC power cord (mains lead)

excessively. The core conductors may be exposed or broken.

• Do not modify the AC power cord (mains lead).

• Do not put anything heavy on the AC power cord (mains lead).

• Do not pull on the AC power cord (mains lead) itself when

disconnecting the AC power cord (mains lead).

• Do not connect too many appliances to the same AC power outlet

(mains socket).

• Do not use a poor fitting AC power outlet (mains socket).

NOTE ON AC ADAPTER

Warning

To reduce the risk of fire or electric shock, do not expose this apparatus

to rain or moisture.

To prevent fire or shock hazard, do not place objects filled with liquids,

such as vases, on the apparatus.

Do not install this equipment in a confined space, such as a bookshelf

or similar unit.

• Please ensure that the AC power outlet (mains socket) is installed near

the equipment and shall be easily accessible.

• Be sure to use the supplied AC adapter and AC power cords (mains

lead). Otherwise it may cause a malfunction.

• Connect the AC adapter to an easily accessible AC power outlet

(mains socket).

• Do not coil the AC power cord (mains lead)

around the AC adapter. The core wire may be cut

and/or it may cause a malfunction of the TV.

• Do not touch the AC adapter with wet hands.

• If you notice an abnormality in the AC adapter,

disconnect it from the AC power outlet (mains socket) immediately.

• The set is not disconnected from the AC source as long as it is

connected to the AC power outlet (mains socket), even if the set itself

has been turned off.

• As the AC adapter will become warm when it is used for a long time,

you may feel hot when touching it by hand.

Prohibited Usage

Do not install/use the TV set in locations, environments or situations such

as those listed below, or the TV set may malfunction and cause a fire,

electrical shock, damage and/or injuries.

Location:

• Outdoors (in direct sunlight), at the seashore, on a ship or other

vessel, inside a vehicle, in medical institutions, unstable locations,

near water, rain, moisture or smoke.

• If the TV is placed in the changing room of a public

bath or hot spring, the TV may be damaged by

airborne sulfur, etc.

• For best picture quality, do not expose the screen to

direct illumination or sunlight.

• Avoid moving the TV from a cold area to a warm area. Sudden room

temperature changes may cause moisture condensation. This may

cause the TV to show poor picture and/or poor colour. Should this

occur, allow moisture to evaporate completely before powering the TV

on.

• Never spray water or detergent directly on the TV

set. It may drip to the bottom of the screen or exterior

parts and enter the TV set, and may cause damage

to the TV set.

Environment:

• Places that are hot, humid, or excessively dusty; where insects may

enter; where it might be exposed to mechanical vibration, near

flammable objects (candles, etc). The TV set shall not be exposed to

dripping or splashing and no objects filled with liquids, such as vases,

shall be placed on the TV.

• Do not place the TV in a humid or dusty space, or

in a room with oily smoke or steam (near cooking

tables or humidifiers). Fire, electric shock, or

warping may result.

• Do not install the TV in places subject to extreme

temperature such as in direct sunlight, near a radiator or a heating

vent. The TV may overheat in such condition which can cause

deformation of the enclosure and/or TV malfunction.

Situation:

• Do not use when your hands are wet, with the cabinet removed, or

with attachments not recommended by the manufacturer. Disconnect

the TV set from AC power outlet (mains socket) and antenna during

lightning storms.

• Do not install the TV so that it sticks out into an open

space. Injury or damage from a person or object

bumping into the TV may result.

Broken pieces:

• Do not throw anything at the TV set. The screen

glass may break by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you have

unplugged the AC power cord (mains lead). Otherwise electric shock

may result.

When not in use

• If you will not be using the TV set for several days, the TV set should

be disconnected from the AC power (mains) for environmental and

safety reasons.

• As the TV set is not disconnected from the AC power (mains) when the

TV set is just turned off, pull the plug from the AC power outlet (mains

socket) to disconnect the TV set completely.

• However, some TV sets may have features that require the TV set to be

left in standby to work correctly.

For children

• Do not allow children to climb on the TV set.

• Keep small accessories out of the reach of children, so that they are

not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the AC power cord (mains lead)

immediately if any of the following problems occur.

Ask your dealer or Sony service centre to have it checked by qualified

service personnel.

When:

− AC power cord (mains lead) is damaged.

− Poor fitting of AC power outlet (mains socket).

− TV set is damaged by being dropped, hit or having something thrown

at it.

− Any liquid or solid object falls through openings in the cabinet.

About LCD Monitor Temperature

When the LCD Monitor is used for an extended period, the panel

surrounds become warm. You may feel hot when touching there by the

hand.

WALL-MOUNT BRACKET

Below information shows the correct handling of the Wall-Mount Bracket.

Be sure to read this information thoroughly and use the Wall-Mount

Bracket correctly.

To Customers:

Be sure to observe the following precautions for safety to prevent a

serious injury through fire, electric shock, the product toppling over, or

the product dropping.

• Be sure to subcontract the installation to licensed contractors and

keep small children away during installation.

• Be sure to subcontract moving or dismounting of the TV to licensed

contractors.

• Do not remove screws, etc., after mounting the TV.

• Do not make alterations to the parts of the Wall-Mount Bracket.

• Do not mount any equipment other than the specified product.

• Do not apply any load other than the TV on the Wall-Mount Bracket.

• Do not lean on or hang from the TV.

• Do not handle the TV with excessive force during cleaning or

maintenance.

To Sony Dealers and Contractors:

The following instructions are for Sony dealers and contractors only. Be

sure to read safety precautions described below and pay special

attention to safety during the installation, maintenance and checking of

this product.

• Do not install the Wall-Mount Bracket on wall

surfaces where the corners or the sides of the TV

are protruding away from the wall surface.

• Do not install the TV over or under an

air-conditioner.

• Be sure to install the Wall-Mount Bracket securely

to the wall following the instructions in this

instruction manual. If any of the screws are loose or fall

out, the Wall-Mount Bracket may fall and cause injury

or property damage.

• Be sure to use the supplied screws and attachment

parts properly following the instructions given in this

instruction manual. If you use substitute items, the

TV may fall and cause bodily injury to someone or

damage to the TV.

• Be sure to assemble the bracket properly following the

instructed procedure explained in this instruction manual.

• Be sure to tighten the screws securely in the designated position.

• Be careful not to subject the TV to shock during installation.

• Be sure to install the TV on a wall that is both perpendicular and flat.

• After proper installation of the TV, secure the cables properly.

• Do not allow the AC power cord (mains lead)

or the connecting cable to be pinched as the

internal conductors may become exposed and

cause a short circuit or an electrical break.

Precautions

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor light or during

long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid excessive

levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision technology and

99.99% or more of the pixels are effective, black dots may appear or

bright points of light (red, blue, or green) may appear constantly on

the LCD screen. This is a structural property of the LCD screen and is

not a malfunction.

• Do not push or scratch the front filter, or place objects on top of this TV

set. The image may be uneven or the LCD screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in the picture

or the picture may become dark. This does not indicate a failure.

These phenomena disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed continuously. It

may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in use. This is

not a malfunction.

• The LCD screen contains a small amount of liquid crystal. Follow your

local ordinances and regulations for disposal.

Handling and cleaning the screen surface/

cabinet of the TV set

Be sure to unplug the AC power cord (mains lead) connected to the TV

set from AC power outlet (mains socket) before cleaning.

• To remove dust from the screen surface/cabinet, wipe gently with a

soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened

with a diluted mild detergent solution.

• Never spray water or detergent directly on the TV

set. It may drip to the bottom of the screen or exterior

parts and enter the TV set, and may cause damage

to the TV set.

• Never use any type of abrasive pad, alkaline/

acid cleaner, scouring powder, or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using such materials or maintaining

prolonged contact with rubber or vinyl materials may result in damage

to the screen surface and cabinet material.

• Periodic vacuuming of the ventilation openings is recommended to

ensure to proper ventilation.

• When adjusting the angle of the TV set, move it slowly so as to prevent

the TV set from moving or slipping off from its table stand.

Optional Equipment

Keep optional components or any equipment emitting electromagnetic

radiation away from the TV set. Otherwise picture distortion and/or noisy

sound may occur.

(Caution about handling the remote control)

Notes

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old and new

batteries.

• Dispose of batteries in an environmentally friendly way. Certain regions

may regulate the disposal of batteries. Please consult your local

authority.

• Handle the remote with care. Do not drop or step on it, or spill liquid

of any kind onto it.

• Do not place the remote in a location near a heat source, a place

subject to direct sunlight, or a damp room.

WALL-MOUNT BRACKET

• If you use the TV installed on the Wall-Mount Bracket for a long time,

the wall behind or above the TV may become discoloured or the

wallpaper may come unstuck, depending on the material of the wall.

• If the Wall-Mount Bracket is removed after installing it on the wall, the

screw holes are left.

• Do not use the Wall-Mount Bracket in a place where it is subjected to

mechanical vibrations.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony Bravia KLV-46R472A LCD televisie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony Bravia KLV-46R472A LCD televisie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sony LCD televisies
Meer handleidingen voor LCD televisies

Veelgestelde vragen over Sony Bravia KLV-46R472A LCD televisie

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Sony Bravia KDL-46W4220 LCD televisie

Handleiding

Sony Bravia KDL-40Z5810 LCD televisie

Handleiding

Sony Bravia KDL-46HX823 LCD televisie

Handleiding

Sony Bravia KDL-32R505C LCD televisie

Handleiding

Sony Bravia KDL-32EX725 LCD televisie

Handleiding

Sony Bravia KDL-32R403C LCD televisie

Handleiding

Sony Bravia KD-49XF7005 LCD televisie

Handleiding

Sony Bravia KDL-40D2600 LCD televisie

Gerelateerde categorieën