Handleiding AlpicAir ACI-37HW1 Airconditioner

Handleiding

Fan Coil Of Four-way Cassette Type

OWNER'S MANUAL

Thank you very much for purchasing our air conditioner,

Before using your air conditioner , please read this manual carefully and keep it for future reference.

1. IMPORTANT SAFETY INFORMATION

To prevent injury to the user or other people and property

damage, the following instructions must be followed. Incorrect

operation due to ignoring of instructions may cause harm or

damage.

WARNING

Ask your dealer for installation of the air conditioner.

Incomplete installation performed by yourself may result in a

water leakage, electric shock, and fire.

Ask your dealer for improvement, repair, and

maintenance.

Incomplete improvement, repair, and maintenance may result

in a water leakage, electric shock, and fire.

In order to avoid electric shock, fire or injury, or if you

detect any abnormality such as smell of fire, turn off the

power supply and call your dealer for instructions.

Never let the indoor unit or the remote controller get wet.

It may cause an electric shock or a fire.

Never press the button of the remote controller with a

hard, pointed object.

The remote controller may be damaged.

Never replace a fuse with that of wrong rated current or

other wires when a fuse blows out.

Use of wire or copper wire may cause the unit to break down

or cause a fire.

It is not good for your health to expose your body to the

air flow for a long time.

Do not insert fingers, rods or other objects into the air

inlet or outlet.

When the fan is rotating at high speed, it will cause injury.

Never use a flammable spray such as hair spray,

lacqueror paint near the unit.

It may cause a fire.

Never touch the air outlet or the horizontal blades while

the swing flap is in operation.

Fingers may become caught or the unit may break down.

Never put any objects into the air inlet or outlet.

Objects touching the fan at high speed can be dangerous.

Never inspect or service the unit by yourself.

Ask a qualified service person to perform this work.

Do not dispose this product as unsorted municipal

waste.Collection of such waste separately for special

treatment is necessar

CAUTION

Do not use the air conditioner for other purposes.

In order to avoid any quality deterioration, do not use the unit

for cooling precision instruments, food, plants, animals or

works of art.

Before cleaning, be sure to stop the operation, turn the

breaker off or pull out the supply cord.

Otherwise, an electric shock and injury may result.

In order to avoid electric shock or fire, make sure that an

earth leak detector is installed.

Be sure the air conditioner is grounded.

In order to avoid electric shock, make sure that the unit is

grounded and that the earth wire is not connected to gas or

water pipe, lightning conductor or telephone earth wire.

Do not operate the air conditioner with a wet hand.

An electric shock may happen.

Do not touch the heat exchanger fins.

These fins are sharp and could result in cutting injuries.

Do not place items which might be damaged by moisture

under the indoor unit.

Condensation may form if the humidity is above 80%, the

drain outlet is blocked or the filter is polluted.

After a long use, check the unit stand and fitting for

damage.

If damaged, the unit may fall and result in injury.

To avoid oxygen deficiency, ventilate the room

sufficiently if equipment with burner is used together

with the air conditioner.

Arrange the drain hose to ensure smooth drainage.

Incomplete drainage may cause wetting of the building,

furniture etc.

Never touch the internal parts of the controller.

Do not remove the front panel. Some parts inside are

dangerous to touch, and a machine trouble may happen.

Never expose little children, plants or animals directly to

the air flow.

Adverse influence to little children, animals and plants may

result.

1

owner's manual

To prevent water leak, contact your dealer.

When the system is installed and runs in a small room, it is

required to keep the concentration of the water, if by any

chance coming out, below the limit. the cool capacity would

be lower.

Turn off any combustible heating devices, ventilate the

room, and contact the dealer where you purchased the

unit.

Do not use the air conditioner until a service person confirms

that the portion where the water leaks is repaired.

W ARNING

The safty precautions listed here are divided into two categories. In

either case, important safty information is listed which must be read

carefull y .

Failure to observe a warning may result in death.

CAUTION

Failure to observe a caution may result in injury or damage

to the equipment.

Do not place appliances which produce open fire in

places exposed to the air flow from the unit or under the

indoor unit.

It may cause incomplete combuston or deformation of the unit

due to the heat.

Do not install the air conditioner at any place where

flammable gas may leak out.

If the gas leaks out and stays around the air conditioner, a fire

may break out.

The appliance should not be used by children without

supervision.

2. PARTS NAMES

The air conditioner consists of the indoor unit, the outdoor unit,

the connecting pipe and the remote controller.

This function is used to operate the unit temporarily in case you

misplace the remote controller or its batteries are exhausted.

Two modes including AUTO and FORCED COOL can be

selected through the TEMPORARY BUTTON on the air-in grill

control box of the indoor unit. Once you push this button, the air

conditioner will run in such order: AUTO, FORCED COOL,

OFF, and back to AUTO.

AUTO

The OPERATION lamp is lit, and the air conditioner will run

under AUTO mode. The remote controller operation is enabled

to operate according to the received signal.

FORCED COOL

The OPERATION lamp flashes, the air conditioner will turn to

AUTO after it is enforced to cool with a wind speed of HIGH for

30 minutes. The remote controller operation is disabled.

OFF

The OPERATION lamp goes off. The air conditioner is OFF

while the remote controller operation is enabled.

1

2

3

3. OPERATION RANGE

Use the system in the following temperature for safe and

effective operation.

NOTE

1

2

3

If air conditioner is used outside the above conditions, it

may cause the unit to function abnormally.

The phenomenon is normal that the surface of air

conditioning may condense water when the relative

larger humidity in room, please close the door and

window.

Optimum performance will be achieved within these

operating temperature range.

In heating mode,the temperature of the inlet water must

be under 75℃.

Water system operating pressuer: Max: 1.6MPa, Min:

0.15MPa.

4. HINTS FOR ECONOMICAL OPERATION

The following should be noticed to ensure an economical

operation.

Adjust the air flow louver properly and avoid direct air flow to

room inhabitants.

Adjust the room temperature properly for a comfortable

environment. Avoid excessive heating or cooling.

Prevent direct sunlight during cooling operation by using

curtains or blinds.

Ventilate often. Extended use requires special attention to

ventilation.

Keep doors and windows closed. If the doors and windows

remain open, air will flow out of your room causing a decrease

in the cooling or heating effect.

Never place objects near the air inlet or the air outlet of the unit.

It may cause deterioration in the effect or stop the operation.

Set the timer .

If you don't plan to use the unit for a long time, please take the

batteries from the remote controller. When the power is on,

some energy will be consumed,even if the air conditioner isn't in

operation. So please disconnect the power to save energy.

2

owner's manual

Function indicators on indoor unit display panel

(figure 1) Display panel

NOTE

This manual does not include Remote Controller

Operations, see the<<Remote Controller Owner's

manual>> packed with the unit for details.

PRE-DEF indicator(cooling and heating type)

or fan only indicator(cooling only type)

Infrared signal receiver

Operation lamp Timer indicator

Alarm indicator

Temporary button

OPERATION TIMER DEF./FAN ALARM

Frost indicator

４

5

If electrical appliances are disposed of in landfills or dumps,

hazardous substances can leak into the groundwater and get

into the food chain, damaging your health and well-being

DISPOSAL：Do not dispose this product as unsor-

ted municipal waste. Collection of such waste sepa-

rately for special treatment is necessary.

Do not dispose of electrical appliances as unsorted municipal

waste, use separate collection facilities.

Contact you local government for information regarding the

collection systems available.

Cooling operation

Heating operating

(cooling only

type without)

Mode

Temperature

Outdoor

temperature

Room

temperature

water inlet

temperature

0°C～30°C

17°C～32°C

30°C～75°C

3°C～20°C

-15°C～24°C

0°C～43°C

Keep the indoor unit and remote controller at least 1 m away

from televisions, radios, stereos, and other similar equipment.

Failing to do so may cause static or distorted pictures.

A dirty air filter will reduce cooling or heating efficiency, please

clean it once two weeks.

5. ADJUSTING AIR FLOW DIRECTION

6. MAINTENANCE

While the unit is in operation, you can adjust the air flow louver

to change the flow direction and naturalize the room

temperature evenly. Thus you can enjoy it more comfortably.

Set the air flow direction.

Press the SWING button to adjust the louver to the desired

position and press this button again to maintain the louver at

this position.

Adjust the air flow direction automatically.

Press the SWING button, the louver will swing automatically.

While this function is set, the swing fan of indoor unit runs;

otherwise, the swing fan doesn't run. The swing scale of every

side is 30. When the air conditioner isn't in operation (including

when TIMER ON is set), the SWING button will be invalid.

CAUTION

Before you clean the air conditioner, be sure the power

supply is off.

Maintenance after a long stop period

(eg. at the beginning of the season)

Maintenance before a long stop period

(eg. at the end of the season)

Check and remove everything that might be blocking inlet

and outlet vents of indoor units .

Clean air filters and casings of indoor units.

Refer to "Cleaning the air filter" for details on how to proceed

and make sure to install cleaned air filters back in the same

position.

Turn on the power at least 12 hours before operating the unit

in order to ensure smoother operation. As soon as the power

is turned on, the remote controller displays appear.

Let the indoor units run in fan only operation for about half a

day in order to dry the interior of the units.

Clean air filters and casings of indoor units. Refer to "

Cleaning the air filter" for details on how to proceed and

make sure to install cleaned air filters back in the same

position.

Cleaning the air filter

The air filter can prevent the dust or other particulate from

going inside .In case of blockage of the filter , the working

efficiency of the air conditioner may greatly decrease .

Therefore , the filter must be cleaned once two weeks during

long time usage.

If the air conditioner is installed in a dust place , clean the the

air filter frequent.

If the accumulated dust is too heavy to be cleaned , please

replace the filter with a new one(replaceable air filter is an

optional fitting).

Open the air-in grill

Push the grill switches towards the middle simultaneously as

indicated in figure 3. Then pull down the air-in grill.

The control box cables ,which are originally connected with

the main body electrical terminators must be pulled off before

doing as indicated above.

1

2

3

4

Take out the air-in grill (together with the air filter shown in

figure 4).

Pull the air-in grill down at 45 and lift it up to take out the

grill.

Dismantle the air filter.

Clean the air filter

Vacuum cleaner or pure water may be used to clean the air

filter.If the dust accumulation is too heavy , please use soft

brush and mild detergent to clean it and dry out in cool place

.

The air-in side should face up when using vacuum cleaner.

(See Fig. 5)

The air-in side should face down when using water.

(See Fig. 6)

Caution : Do not dry out the air filter under direct

sunshine or with fire.

3

owner's manual

ADJUST IT UP AND DOWN

(figure 2)

Check if the wiring is not broken off or disconnected.

Disconnect the power supply before cleaning and

maintenance. Use dry cloth to clean the unit.

A wet cloth may be used to clean the indoor unit if it is very

dirty.

Never use a damp cloth on the remote controller.

Do not use a chemically-treted duster for wiping or leave such

material on the unit for long.

it may damage or fade the surface of the unit.

Do not use benzine, thinner, polishing powder, or similar

solvents for cleaning.

These may cause the plastic surface to crack or deform.

Re-install the air filter.

Install and close the air-in grill in the reverse order of step 1

and 2 and connect the control box cables to the

corresponding terminators of the main body .

5

6

W

h

e

n

fig.3

fig.4

fig.5

fig.6

7. FOLLOWING SYMPTOMS ARE NOT AIR

CONDITIONER TROUBLES

Symptom 1: The system does not operate

Symptom 2: Change into the fan mode during cooling

mode

Symptom 3: White mist comes out of a unit

Symptom 4: Noise of air conditioners cooling

The air conditioner does not start immediately after the ON/OFF

button on the romote controller is pressed.

If the operation lamp does not lights, the system is in abnormal

condition. or there is no problem with the unit.

If the operation lamp and the "

PRE-DEF indicator(cooling and

heating type) or fan only indicator(cooling only type)"

light, it

means you choose the heating model, When just starting, the

indoor unit appears "anti cold wind" protection because of its

overlow outlet temperature.

When the room temperature drops to the set temperature, the

indoor unit changes to fan mode; when the temperature rises

up, the rotate speed of the fan will rise too, It is same in the

heating mode.

Symptom 4.1: Indoor unit

When humidity is high during cooling operation If the interior of

an indoor unit is extremely contaminated, the temperature

distribution inside a room becomes uneven. It is necessary to

clean the interior of the indoor unit. Ask your dealer for details

on cleaning the unit. This operation requires a qualified service

person.

A continuous low "shah" sound is heard when the system is in

cooling operation or at a stop.

When the drain pump (optional accessories) is in operation,this

noise is heard.

A "pishi-pishi" squeaking sound is heard when the system stops

after heating operation.

Expansion and contraction of plastic parts caused by

temperature change make this noise.

Symptom 4.2: Indoor unit, outdoor unit

A continuous low hissing sound is heard when the system is in

operation.

This is the sound of water flowing through both indoor and

outdoor units.

A hissing sound which is heard at the start or immediately after

stopping operation .

This is the noise of water caused by flow stop or flow change.

4

owner's manual

Solution

Clean the heat exchanger.

Clean the air filter.

Eliminate all dirties and make air

smooth.

Close doors and windows.

Make curtains in order to shelter from

sunshine.

Reduce heat source.

AC cooling capacity reduces (normal).

Check leakage .

Symptoms Causes

Symptom 5: Dust comes out of the unit

Symptom 6: The units can give off odours

When the unit is used for the first time in a long time.

This is because dust has gotten into the unit.

The unit can absorb the smell of rooms, furniture, cigarettes,

etc., and then emit it again.

The operation lamp is flashing rapidly (five times per second),

you disconnect the unit with the power and then connect the

unit with the power again after two or three minutes but the

lamps still flash.

Switch operations are erratic.

The fuse is blown frequently or the circuit breaker is tripped

frequently.

Foreign matter or water has fallen inside the air conditioner.

Water leaks from the indoor unit.

8. TROUBLESHOOTING

If one of the following malfunctions occur, stop operation, shut

off the power, and contact with your dealer.

If the system does not properly operate except the above

mentioned cases or the above mentioned malfunctions is

evident, investigate the system according to the following

procedures. (see in table 1)

8.1. Troubles and causes of air conditioner

Unit does not start

Air flowing normally but

completely can't cooling

Units start or stop frequently

Low cooling effect

Low heating effect

Power failure.

Power switch is off.

Fuse of power switch may have burned.

Batteries of remote controller exhausted

or other problem of controller.

Temperature is not setted correctly.

Air or no concreting gas in the watering

circuit.

three-way valve is malfunction.

Voltage is too high or too low.

System circuit is blocked.

Temperature is not setted correctly.

Indoor unit heat exchanger is dirty.

The air filter is dirty.

Inlet/outlet of indoor units is blocked.

Doors and windows are open

Sunlight directly shine.

Too much heat resource.

Leakage of water .

Wait for the comeback of power.

Switch on the power.

Replace the fuse.

Replace the batteries or check the

controller.

Set the temperature properly.

Vacuum .

Maintenance or change three-way

valve.

Install manostat.

Find reasons and solution.

Use heating device.

Close doors and windows.

Check leakage.

Doors and windows not completely

closed.

Leakage of water.

table 1

5

owner's manual

8.2 Troubles and causes of remote controller

Before asking for serving or repairing , check the following

points.

(see in table 2)

6

owner's manual

Symptoms

Causes

The fan speed can not be

changed.

Check whether the MODE

indicated on the display is

"AUTO"

Check whether the MODE

indicated on the display is

"DRY"

When the automatic mode is

selected, the air conditioner will

automatically change the fan

speed.

When dry operation is selected,

the air conditioner automatically

change the fan speed. The fan

speed can be selected during

"COOL" , "FAN ONLY",

and

"HEAT"

The remote controller signal is

not transmitted even when

the ON/OFF button is pushed.

Check whether the batteries

in the remote controller are

exhausted.

The power supply is off.

No receiving tone sounds

from the indoor unit even

when the ON/OFF button is

pressed.

Check whether the signal

transmitter of the remote

controller is properly directed

to the infrared signal receiver

of the indoor unit when the

ON/OFF button is pressed.

Directly transmit the signal transmitter of

the remote controller to the

infrared signal receiver of the

indoor unit, and then repeatly

push the ON/OFF button twice.

The indication on the display

disappears after a lapse of

time.

Check whether the timer

operation has come to an

end when the TIMER OFF

is indicated on the display.

The air conditioner operation will

stop up to the set time

The TIMER ON indicator

goes off after a lapse of

certain time.

Check whether the timer

operation is started when

the TIMER ON is indicated

on the display.

Up to the set time, the

air conditioner will automatically

start and the appropriate

indicator will go off.

The TEMP. indicator does

not come on.

Check whether the MODE

indicated on the display is

FAN ONLY

The temperature cannot be set during

FAN mode.

table 2

Solution

×

NO.

Malfunction running lamp timer lamp defrosting lamp alarm lamp

alarm lamp

1

2

3

4

Room temperature sensor

checking channel is abnormal

Evaporator sensor checking

channel is abnormal

EEPROM malfunction

Water-level switch

malfunction

×

×

×

×

×

×

×

×

× ☆

☆

☆

(× Extinguish,☆ Flash at 5Hz）

E2

E3

E7

EE

☆

☆

8.3 Malfunctions and malfunction code

If anything happens like the situation described below, please shut off the power supply of the unit

and contact with the custormer service center immediately.

5

Fan Failure

×

×

☆

E8

6

Not set models

× × ☆

PH

×

☆

☆

2020001A1954 V1.3

此页不做菲林

1.按CE认证要求增加相关内容，更改第1.2.3.8.9页内容

由V1.0升级到V1.1

双胶纸100克，小A4

V1.2更改说明如下：

封面商标颜色改为黑色。

V1.3更改说明如下：

修改第6页，完善风盘故障代码

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je AlpicAir ACI-37HW1 Airconditioner. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met AlpicAir. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van AlpicAir ACI-37HW1 Airconditioner in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor AlpicAir Airconditioners
Meer handleidingen voor Airconditioners

Veelgestelde vragen over AlpicAir ACI-37HW1 Airconditioner

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

AlpicAir AFI-71AHPDC1D Airconditioner

Handleiding

AlpicAir ACI-180AHPDC3D Airconditioner

Handleiding

AlpicAir AWI-54HRDC1TB Airconditioner

Handleiding

AlpicAir AOU-53HRDC1A Airconditioner

Handleiding

AlpicAir AOU-140AHPDC3D Airconditioner

Handleiding

AlpicAir AM5O-120HRDC1A Airconditioner

Handleiding

AlpicAir ATI-180HRDC3A Airconditioner

Handleiding

AlpicAir AOU-180HRDC3A Airconditioner

Gerelateerde categorieën