Handleiding Anko Wanderer Loopwagen

Handleiding

Read these instructions carefully before use and keep for future reference. The child

may be hurt if you do not follow these instructions.

User guide

Toy Tray

Frame

Seat

Upper Tray

Cover

Stopper

Base

Front castors

Rear

Castors

WANDERER WALKER

INSTRUCTION MANUAL

adjust button

adjust

mechanism

adjust button

adjust

mechanism

1

Lift the tray up to the desired

height and make sure the locking

device is engaged.

2

To adjust the height to the upper

position, pull the upper tray to the

height you require.

To adjust the height to the lower

position, turn the adjustment button

90 degrees and press the button

upward to release the lock, then

press the tray to the required

position.

Warning: Please make sure the

baby is not in the walker when

you adjust height and make sure

the adjustment mechanism is

locked before use.

Keycode: 42223245

MADE IN CHINA

©KMART AUSTRALIA LIMITED

ANKO, KIDS&CO. AND BABY SOLUTIONS ARE ALL TRADEMARKS OF KMART AUSTRALIA LIMITED.

THEY ARE USED IN NEW ZEALAND BY KMART NZ HOLDINGS LIMITED TRADING AS KMART IN

NEW ZEALAND.

KMART AUSTRALIA - 690 SPRINGVALE RD, MULGRAVE, VIC 3170 AUSTRALIA.

KMART NEW ZEALAND - REGIONAL OFFICE C/O KMART PAPATOETOE STORE HUNTERS PLAZA,

GREAT SOUTH RD, PAPATOETOE, AUCKLAND, NEW ZEALAND.

CAUTION

Read these instructions carefully before assembly and use and keep for

future reference. The child may be hurt if you do not follow these instructions.

directional

wheel

universal

wheel

Assemble

1

1

3

4

2

2

4

3

5 6

6

4

3

2

1

3

2

1

5

Remove base and frame from

carton and extend tray from base.

The base will be upside down and

wrong way around. Remove base

from the frame by detaching the

frame from the frame runners

positioned in the base in addition

to removing the cable ties.

Place the base of the walker on a

flat surface, with the bottom facing

up. Insert rear and front castors

into corresponding openings by

pressing and snapping into

positions. Note: once fitted, pull

on castors to ensure it is securely

attached.

Turn the base correct way up and

facing correct way. Insert the front

2 arms of the frame into the frame

runners positioned at the front of

the base. Using the folding

adjustor situated under the tray,

turn the lever and let the walker

fold down. Then insert the back

frame arms into the "8" shaped

hole at the back of the base on

either side.

Position the seat on the frame and

attach it by inserting the tabs into

the corresponding holes. Make

sure to insert the tabs on sides

first, and then insert the tabs in

center. Make sure you have

installed the seat correctly.

To unfold the walker, simply pull

the upper tray to the upright

position. To fold, simply turn the

lever under the tray.

Attach toys to the corresponding

holes on the tray and secure with

the screws.

Drawings in the manual are for visual purposes only. Actual product may vary slightly.

The manufacturer reserves the right to change any specification or feature without prior notice.

CARE AND MAINTENANCE:

WARNING:

The walker is not intended for babies that can already walk unassisted.

WARNING:

Do not use the walker if it is damaged or broken.

WARNING:

Do not use until the baby can sit upright by itself.

WARNING:

Clean friction components regularly to maintain stopping performance.

WARNING:

Never leave the child unattended. Always keep child in view while in walker.

WARNING:

Use only on flat surfaces free of objects that could cause the walker to tip over.

WARNING:

To avoid burns, keep the child away from hot liquids, ranges, radiators,

space heaters, fire places etc.

WARNING STAIR HAZARD:

Avoid serious injury or death. Block stairs/steps securely before using walker.

_

- Adult assembly required.

- Read all instructions before assembly and use of the product.

- This baby walking frame is intended to be used by children who can sit unaided, approximately

from 6 months. It is not intended for children weighing more than 12kg and/or more than 78cm

in height.

- Take care when unpacking and during assembly.

- Dispose of all packaging materials carefully after assembly.

- Regularly check that all fittings remain tight. Tighten if required.

- Inspect the product before assembly and periodically during use. Never use this product if

there is any loose or missing fasteners, joints or broken parts.

- Any additional or replacement parts should only be obtained from the manufacturer or distributer.

- Never substitute parts.

- All assembly fittings are to be properly tightened. Inspect regularly and re-tighten as necessary.

- To clean the seat pad, removable and non-removable fabric covers may be hand washed or spot cleaned.

Use mild soap or upholstery shampoo. Wash separately. Do not bleach. Dry in shade thoroughly before re-use

and avoid direct heat and sunlight. Do not iron. Do not dry clean.

- To clean the walker, wipe with a damp cloth and dry immediately with a soft clean cloth. Do not

use abrasive pads, bleach or strong household cleaners. Damage may result.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Anko Wanderer Loopwagen. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Anko. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Anko Wanderer Loopwagen in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Anko Loopwagens
Meer handleidingen voor Loopwagens