Handleiding Camp Trails Cabin Creek Tent

Handleiding

ENGLISH VERSION

Europe distribution: Nigor Net B.V., Utrecht, The Netherlands T+31 88 0999899 F+31 30 2809509 E [email protected] U www.camptrails.eu

User instructions:

Cabin Creek

Directly after purchase

1. Choose the right tent pegs

Important: Different camping grounds require different pegs (plastic for clay; metal for rocky;

wood for sand). Your CampTrails tent contains 1 type of top quality pegs for general usage. To

ensure secure setup of your tent, when you expect to camp on different grounds during your

trip(s), please buy the appropriate pegs at your dealer’s in advance.

2. Do a trial-set up of your tent.

Please set up your tent prior to your first trip to ensure you are familiar with the setup and the

tent is in proper condition.

Tent set-up instructions (We recommend 2 people)

Important: Inspect the chosen site and clear all sharp and/or protruding objects that

can damage the tent floor. Be sure the site will offer proper drainage of rainwater

away from the tent. When choosing a site try to pitch the tent in a shaded area.

1) Unroll the tent separating the components. Assemble the poles ensuring ferrules are fully

connected. You will have two (2) equal length long main frame poles and two (2) poles

of two different lengths.

2) Spread out the tent, locate the pole sleeves that run diagonally. Insert the 2 long main

frame poles into these sleeves. Always push poles through sleeves (even when taking

down) to ensure ferrule connections are complete. Pulling can separate at ferrules with

potential pole breakage when flexing. Poles when inserted through sleeves will form an

X pattern on the still flat tent.

3) Insert the longer of the leftover poles through the pole sleeve going side to side across

the tent, located towards the middle area of the tent. This pole should cross under the

main frame poles.

4) Insert the last pole through the pole sleeve located at the end of the tent . All poles will

now be fully inserted through sleeves and the tent is still flat on the ground.

5) At this point one person needs to lift the tent where the two main frame poles cross to

help getting the tent up. The second person will be able to move around the tent making

the pole to tent connections.

6) Now connect the two main frame poles at the front corners with the ring pin system.

7) Move to the other end of the main frame pole and Flex the pole in order to

make a hoop and connect it to the ring pin connection. Mind that you are using

the correct ring pin connection, as the poles cross here. You need the third ring

pin connection from the front.

8) Repeat step 7 for making the connections for the second main frame pole.

9) Now work with shorter poles. Flex one end and connect it to the ring pin

connection. Flex and insert the other end on the opposite side.

10) Move around the tent attaching all the clips to the frame.

11) Position the tent in desired location and stake securely.

Tent care

We strongly advise you to read the leaflet including warranty and detailed tent care

information before first use!!

 Floor protection: We recommend the use of a thin groundsheet or floor saver

with any tent for added protection from abrasion. The floor saver should be

about 10cm. (4 inches) from the tent edge to avoid the possibility of

channelling water beneath the tent.

 Damaging substances: Fuels

can damage tents as can DEET found in many

insect repellents.

 Exposure to sun: The sun’s UV rays can be harmful

even with technical

advances in fabrics. Prolonged exposure could result in fading and possibly

fabric disintegration. Do not leave a tent up longer than necessary.

 Cleaning: Clean tent fabric, poles and zippers with lukewarm, clean water after

every use. Never use detergents, washing machines or dryers (also see warranty

leaflet).

 Tent storage: It is important that you store the tent in a dry and cool condition

.

If you put the tent away in the carry bag while it is wet, even for a short time, it

may become affected by mildew, which can damage the coating.

 Seams: All major seams are factory taped. Over time seams could experience

delamination. Simply clean the seam and apply seam sealer

that can be

purchased at most outdoor stores.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Camp Trails Cabin Creek Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Camp Trails. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Camp Trails Cabin Creek Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Camp Trails Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Camp Trails Cabin Creek Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.