Handleiding Casio 5410 Uurwerk
Handleiding voor je Casio 5410 Uurwerk nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 1 veelgestelde vraag, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
Operation Guide 5410
E-15
To pull out, rotate, or push the crown in
Important!
x Before performing any of these operations, fi rst unlock the crown.
The illustrations below show the different crown operations.
The crown can be pulled out to one of two (click) positions. Never apply undue force when pulling out the
crown.
First click Second click Rotate Push in
High-speed Movement
When setting a time or when performing home position adjustment (page E-67), you can move the hands
either forward or back at high speed. There are two high-speed levels: HS1 and HS2 (faster than HS1).
To start HS1 high-speed movement
While the crown is pulled out, rotate it rapidly three turns away from you (for
forward movement) or towards you (for reverse movement). High-speed
movement will continue even if you release the crown.
E-14
Using the Crown
This watch has a lock-type crown.
Important!
x You should keep the crown locked during normal daily use. Leaving the crown unlocked creates the
risk of unintended operations or even damage due to impact.
To lock the crown
1. Push the crown back in (page E-15).
x Note that attempting to lock the crown when it is not pushed in can cause
unexpected watch operation.
2. Rotate the crown so Mark 1 is aligned with Mark 2.
3. While pushing in on the crown (a), rotate it to the right (b) until it stops, and align
Mark 1 with Mark 3.
4. Gently pull on the crown to make sure it is securely locked and does not come out.
To unlock the crown
Rotate the crown so Mark 1 aligns with Mark 2.
Mark 2
Mark 1
b
a
Mark 3
Mark 1
E-13
Acquiring GPS Position Information after Changing Time Zones
After arriving at your destination, acquire GPS position information (page E-30).
x Time information is received along with position information.
x After the position information acquisition operation is successful, the watch will refl ect your current
location in its settings, and display the correct time and date for that location.
30
TOKYO
30
NEW YORK
LONDON
x After a position information acquisition operation is successful, you can use the watch as described
under “If you normally plan to use the watch in one time zone”.
Important!
x Put the watch into the Airplane Mode (page E-45) whenever you are inside an aircraft or in any other area
where radio wave reception is prohibited or restricted. After disembarking from an aircraft or leaving
a restricted area, perform a position information acquisition operation to adjust the watch’s time and
date settings.
E-12
Calibration Signal GPS Signal
Evening (between
midnight and 5:00 a.m.)
The receive operation starts
at regular intervals until
receive is successful.
x Locate the watch near a
window.
No auto reception
(Receive using button operation possible.)
Daytime (between 6:00
a.m. and 10:00 p.m.)
No reception The receive operation will start automatically when the
watch is continually expose to light.
(Receive using button operation also supported.)
x Make sure to comply with the conditions below.
− Move the watch outside where there is a clear view
of the sky above, with no obstructing buildings,
trees, or other objects.
− Position the watch with its face pointed straight up.
Important!
x The availability of time calibration signals depends on the country and/or geographic area. See “Time
Calibration Signal Reception Ranges and Conditions” (page E-37).
x You can perform a button operation at any time during the day to perform a GPS time information
acquisition operation and adjust the watch’s time and date settings. See “Receiving GPS Time
Information” (page E-34).
For details, see “Automatic Timekeeping (by GPS Signal and Time Calibration Signal)” (page E-28),
“Timekeeping (by GPS Signal)” (page E-29) and “Timekeeping (by Time Calibration Signal)” (page E-36).
E-11
General Daily Operation Flow
The operations described in this section are applicable following a position acquisition operation
immediately after purchasing the watch.
If you normally plan to use the watch in one time zone
Performing a GPS signal receive or time calibration signal receive operation confi gures time and date
settings.
x If you are in a location where a time calibration signal can be received, it is recommended that you use
the time calibration signal to adjust the time and date.
Important!
x Signal reception requires large amounts of power. Be sure to keep the watch exposed to light so it can
charge its battery and avoid insuffi cient battery power.
x Once a time calibration or GPS signal receive operation is successful, no more Auto Receive
operations are performed that day.
E-10
x After the time and date are adjusted following a successful position information acquisition operation,
you can use the watch as described under “If you normally plan to use the watch in one time zone”
(page E-11).
x Position information acquisition requires large amounts of power. Perform the acquisition operation only
when it is required.
x You can use the procedure under “To check receive operation results (acquisition results)” (page E-40) to
check the latest position information acquisition result.
E-9
Do this immediately after purchasing your watch!
(Position Information Acquisition Operation)
When position information is acquired successfully, the watch is able to determine its current location and
adjust its time and date setting accordingly.
Important!
x Before using the watch, check its current charge level and charge it if necessary. See “Checking the
Charge Level” (page E-17).
x Perform this operation in the Timekeeping Mode (not in the Airplane Mode). See “Mode Reference
Guide” (page E-42).
x It can take as long as 13 minutes for position information to be acquired.
1. Move to a location that is appropriate for GPS signal reception.
x See “Appropriate Signal Reception Location (GPS Signal)” (page E-29).
2. Position the watch with its face pointed straight up and acquire position
information.
x Hold down B for at least three seconds until the
1
Second Hand moves
to T+P. If the
1
Second Hand moves to any other position besides T+P,
keep B depressed until it moves to T+P.
x Successful acquisition of position information will automatically display the
time and date for the resulting location.
x In the normal (not Airplane Mode) Timekeeping Mode, the
7
Mode Hand
indicates the current day of the week.
E-8 C
x UTC (Universal Time Coordinated)
The standard time at any particular location around the world is based on Universal Time Coordinated
(UTC). UTC times are based on high-precision International Atomic Time (TAI).
See “City/Time Zone Indicators and Time Offset Table” (page L-2).
x leap second
There are very slight differences between UTC and TAI due to irregularities in the earth’s rotation. Leap
seconds are added to times to make adjustments for these differences.
Loading…
Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio 5410 Uurwerk. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio 5410 Uurwerk in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Casio |
| Model | 5410 |
| Categorie | Uurwerken |
| Bestandstype | |
| Bestandsgrootte | 0.78 MB |
Alle handleidingen voor Casio Uurwerken
Meer handleidingen voor Uurwerken
Beoordeling
Laat ons weten wat je van de Casio 5410 Uurwerk vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.Veelgestelde vragen over Casio 5410 Uurwerk
Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.
Wat is een quartz-uurwerk? Geverifieerd
Horloges en klokken met een quartz-uurwerk worden aangedreven door een batterij. Deze stuurt een stroom door quartz kristallen die hierdoor gaan trillen. Deze trillingen worden doorgegeven naar het uurwerk. Omdat deze trillingen een vaste frequentie hebben, zijn horloges en klokken met een quartz-uurwerk extreem precies.
Ik vind dit nuttig (26) Lees meer
Praat mee over dit product
Laat hier weten wat jij vindt van de Casio 5410 Uurwerk. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.