Handleiding Casio Collection W-800HG-9AVES Horloge

Handleiding

1

Operation Guide 2499/3092

Alarm

The multi-function alarm lets you specify the hour,

minutes, month, and day for the alarm. You can set up the

alarm so it sounds once when the alarm time is reached,

or for a snooze alarm that repeats up to seven times,

every five minutes.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

• Pressing D in the Alarm Mode toggles between the

alarm screen (Alarm time displayed) and the Hourly

Time Signal screen (

:00

displayed).

• An alarm setting (and an Hourly Time Signal setting) is

available in the Alarm Mode, which you enter by

pressing C.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds Hour

Minutes

Day Month

Year

MA0702-EA

About This Manual

• The operational procedures for Modules 2499 and 3092 are identical. All of the

illustrations in this manual show Module 2499.

• Button operations are indicated using the letters shown in the illustration.

• Each section of this manual provides you with the information you need to perform

operations in each mode. Further details and technical information can be found in

the “Reference” section.

Module 2499 Module 3092

Timekeeping Mode

Alarm Mode Stopwatch Mode Dual Time Mode

Press .

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display.

• In any mode, hold down C for about two seconds to return to the Timekeeping

Mode.

• In the Alarm, Stopwatch and Dual Time modes, the watch always shows the current

Timekeeping Mode time in the lower display area.

Hour : Minutes Seconds

Day of week

PM indicator

year

Month – Da

y

3. When the setting you want to change is flashing, press D to change it as

described below.

To change this setting

Seconds

Hour, Minutes, Year, Month, Day

Perform this button operation

Press D to reset to 00.

Press D to increase the setting.

• Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Month – Day

Hour : Minutes

Alarm Types

The alarm type is determined by the settings you make, as described below.

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm

to sound every month at time you set, on the day you set.

To set an alarm time

1. In the Alarm Mode, press D to display the alarm

screen.

2. Hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

• This operation automatically turns on the one-time

alarm.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Hour Minutes

Month Day

4. While a setting is flashing, press D to increase it.

• To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set x for the month. Press D until the x mark appears (between 12 and 1) while

month setting is flashing.

• To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set xx for the day. Press D until the xx mark appears (between the end of the

month and 1) while the day setting is flashing.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for about 10 seconds. In the case of the

snooze alarm, the alarm repeats up to seven times every five minutes.

• Pressing any button stops the alarm tone operation.

• The alarm and the Hourly Time Signal sound in all modes.

To select the alarm type

1. In the Alarm Mode, press D to display the alarm

screen.

2. Press A to cycle through the available alarm settings

shown below.

One-time

alarm on

Alarm off

Snooze

alarm on

• The alarm on indicator and the snooze alarm on

indicator are shown on the display in all modes while

these functions are turned on.

• The snooze alarm on indicator flashes during the

5-minute intervals between alarms.

• Displaying the Alarm Mode setting screen automatically

changes the alarm type to one-time alarm.

• Changing the Timekeeping Mode setting screen during a 5-minute interval between

snooze alarms stops the current snooze alarm operation (but snooze alarm remains

as the alarm type setting).

• If a snooze alarm time is reached while you are setting the current time in the

Timekeeping Mode, the alarm sounds only once. Subsequent snooze alarm

operations are not performed.

Alarm on/off indicator

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Collection W-800HG-9AVES Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Collection W-800HG-9AVES Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Collection W-800HG-9AVES Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Collection MQ-38UC-2A1ER Horloge

Handleiding

Casio Sheen SHE-4554PGM-4AUEF Horloge

Handleiding

Casio Collection LWS-2200H-1AVEF Horloge

Handleiding

Casio Baby-G BGD-565SC-2ER Horloge

Handleiding

Casio Baby-G BGD-5650-1ER Horloge

Handleiding

Casio Edifice EFR-552L-5AVUEF Horloge

Handleiding

Casio Collection WS-1400H-1BVEF Horloge

Handleiding

Casio Edifice EFV-640D-1AVUEF Horloge

Gerelateerde categorieën