Handleiding Casio G-Shock G-9300-1ER Horloge

Handleiding

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Operation Guide 3261 3281

MO1405-EB

E-2

Warning !

• The measurement functions built into this watch are not intended for taking

measurements that require professional or industrial precision. Values

produced by this watch should be considered as reasonable representations

only.

• The Moon phase indicator that appears on the display of this watch is not

intended for navigation purposes. Always use proper instruments and

resources to obtain data for navigation purposes.

• When engaging in mountain climbing or other activities in which losing your

way can create a dangerous or life-threatening situation, always use a second

compass to confirm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any

damage or loss suffered by you or any third party arising through the use of

this product or its malfunction.

E-3

About This Manual

• Depending on the model of your watch, display text appears either as dark figures

on a light background (Module 3261), or light figures on a dark background

(Module 3281). All of the illustrations in this manual show Module 3261.

• Button operations are indicated using the letters shown in the illustration.

• Note that the product illustrations in this manual are intended for reference only,

and so the actual product may appear somewhat different than depicted by an

illustration.

Module 3261 Module 3281

E-4

Things to check before using the watch

1. Check the battery power level.

Is “H” or “M” displayed for the battery power indicator

(page E-14)?

Go to step 2.

Power is low. Charge the watch by placing it in a

location where it is exposed to light. For details,

see “Charging the Watch” (page E-12).

NO YES

YES

Does any one of the following conditions exist?

• Battery power indicator shows “

L

” and “

LOW

” is

displayed in the upper right corner of the screen.

• “

CHG

” is displayed in the upper right corner of the screen.

• The face is blank.

The watch is charged

sufficiently.

For details about

charging, see

“Charging the Watch”

(page E-12).

NEXT

Battery power

indicator

E-5

2. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” (page E-26) to configure

your Home City and daylight saving time settings.

Important!

World Time Mode data depend on correct Home City, time, and date settings in the

Timekeeping Mode. Make sure you configure these settings correctly.

3. Set the current time.

See “Configuring Current Time and Date Settings” (page E-29).

The watch is now ready for use.

E-6

Contents

E-3 About This Manual

E-4 Things to check before using the watch

E-12 Charging the Watch

E-19 To recover from the sleep state

E-20 To turn Power Saving on and off

E-21 Mode Reference Guide

E-25 Timekeeping

E-26 Configuring Home City Settings

E-26 To configure Home City settings

E-28 To change the Daylight Saving Time (summer time) setting

E-7

E-29 Configuring Current Time and Date Settings

E-29 To change the current time and date settings

E-33 Digital Compass

E-34 To take a digital compass reading

E-40 To perform magnetic declination correction

E-42 To perform bidirectional calibration

E-43 To perform northerly calibration

E-46 To store a direction angle reading in Bearing Memory

E-48 To set a map and find your current location

E-50 To find the bearing to an objective

E-52 To determine the direction angle to an objective on a map and head in

that direction

E-8

E-57 Thermometer

E-57 To enter and exit the Digital Compass/Thermometer Mode

E-59 To calibrate the temperature sensor

E-61 Specifying Temperature Unit

E-61 To specify temperature unit

E-63 Temperature Reading Precautions

E-64 Using the Moon Data

E-64 To enter the Moon Data Mode

E-67 To reverse the displayed Moon phase

E-71 Checking the Current Time in a Different Time Zone

E-71 To enter the World Time Mode

E-72 To view the time in another time zone

E-72 To specify standard time or daylight saving time (DST) for a city

E-9

E-74 Using the Stopwatch

E-74 To enter the Stopwatch Mode

E-74 To perform an elapsed time operation

E-75 To pause at a split time

E-75 To measure two finishes

E-77 Using the Countdown Timer

E-77 To enter the Countdown Timer Mode

E-78 To specify the countdown start time

E-79 To perform a countdown timer operation

E-79 To stop the alarm

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock G-9300-1ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock G-9300-1ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio G-Shock G-9300-1ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Baby-G BA-110X-7A1ER Horloge

Handleiding

Casio Collection LTP-1302PRG-3AVEF Horloge

Handleiding

Casio Edifice EFV-540DC-1CVUEF Horloge

Handleiding

Casio Collection LWS-2200H-1AVEF Horloge

Handleiding

Casio Collection WS-1400H-1AVEF Horloge

Handleiding

Casio Edifice ECB-40PB-1AEF Horloge

Handleiding

Casio G-Shock GA-2140RX-7AER Horloge

Handleiding

Casio Collection W-219HD-1AVEF Horloge

Gerelateerde categorieën