Handleiding Casio G-Shock GA-110SR-1AER Horloge

Handleiding

Operation Guide 5146 5425

E-10

3. Press

&

to change the fl ashing screen content in the sequence shown below to

select the other settings.

Seconds

12/24-Hour

Format

Hour

Minutes

DST

Month

Yea r

City Code

Day

Illumination

Duration

4. When the setting you want to change is fl ashing, use

'

or

%

to change it as

described below.

Screen: To do this: Do this:

Change the city code Use

'

(east) and

%

(west).

Toggle the DST setting between

Daylight Saving Time (

on

) and

Standard Time (

OFF

).

Press

'

.

Toggle between 12-hour (

12H

) and

24-hour (

24H

) timekeeping

Press

'

.

E-11

Screen: To do this: Do this:

Reset the seconds to

00

Press

'

.

Change the hour and minutes

Use

'

(+) and

%

(–).

Change the year, month, or day

Toggle the display illumination

duration between 1.5 seconds (

LT1

)

and three seconds (

LT3

)

Press

'

.

5. Press

$

to exit the setting mode.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

E-12

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down

$

for about three

seconds until the currently selected city code fl ashes in

the upper digital display. This is the setting mode.

2. Press

&

. This will display the DST setting screen.

3. Use

'

to toggle the DST setting on (

on

) and off (

OFF

).

• The default DST setting is off (OFF).

4. When the setting you want is selected, press

$

to exit

the setting mode.

• The DST indicator appears to indicate that Daylight

Saving Time is turned on.

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

DST indicator

E-13

12-hour and 24-hour timekeeping

• With the 12-hour format, the PM indicator (

P

) appears for times in the range of noon

to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59

a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

the PM indicator (

P

).

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-14

Stopwatch

You can use the stopwatch to measure elapsed time, lap

times and split times. If you specify a distance value, the

stopwatch also will calculate and display speeds.

• The digital display range of the stopwatch is 99 hours,

59 minutes, 59.999 seconds. The stopwatch continues

to run until you stop it. If it reaches the above limit, it will

restart the time measurement from zero.

• The stopwatch operation continues even if you exit the

Stopwatch Mode. If you exit the Stopwatch Mode while

a stopwatch operation is in progress, the segments

along the top of the upper digital display (upper display

segments) will indicate the seconds of the current time.

Each segment represents one second. This is to let you

know that a stopwatch operation is in progress.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing

&

(page

E-7).

Speed hand

Upper display

segments

E-15

Important!

• Check to make sure that the speed hand is not moving before you perform any

Stopwatch Mode button operation.

Specifying a Distance Value

You can use the procedure below to specify a distance value, if you want. If you

specify a distance value, the watch will calculate and indicate speed for certain

stopwatch operations.

• The distance value represents kilometers, miles, or any other distance unit you

want. Specifying a distance value of 10.0, for example, can mean 10.0 kilometers

or 10.0 miles.

• No speed calculation is performed when 0.0 is specifi ed as the current distance

value.

• For lap time readings, you can specify either the lap distance (when all the laps are

the same distance) or the total race distance.

• For split time readings, you can specify the total race distance only. Though the

watch will indicate a speed each time you take a split reading, they will be based

on the total race distance, and so they will not indicate actual intermediate split

speeds.

E-16

To specify a distance value

1. In the Stopwatch Mode, make sure the stopwatch is

stopped and reset to all zeros.

• If you need to reset the stopwatch to all zeros, press $.

2.

Hold down

$

for about three seconds until the current

distance value setting fl ashes in the lower digital display.

• This is the distance value setting mode.

3. Press

&

to move the fl ashing between the values on

the left side and right side of the distance value decimal

point.

4. While a distance value is fl ashing, use

'

(+) and

%

(–)

to change it.

• You can specify a distance value in the range of 0.1

to 99.9.

5. After specifying the distance value you want, press

$

to exit the setting mode.

l

l

l

l

l

l

l

l

l

l

l

E-17

How speed is indicated

• While an elapsed time measurement operation is being

performed in the Stopwatch Mode, the watch will

indicate a speed value, which is calculated based on

the distance you specifi ed and the elapsed time.

The speed value is indicated as described below.

Speed hand: Up to 100

Upper display segments: 100 unit

A

1000

indicator points to 1000 (located to the right of

the upper display segments) when the speed value

exceeds 1000.

• The speed hand indicates speed values less than 100.

Only even-numbered values are indicated.

•

Speed can be indicated from 0 to 1998.

OVER

is indicated

by the speed hand when the speed exceeds 1998.

Example:

When the speed value is 1,740.

Speed hand: Indicates

40

.

Upper display segments: Indicate

700

.

1000

indicator: Displayed

Speed hand

(Up to 100)

Segments

(100 unit)

OVER

1000 indicator

E-18

Time Measurement

You need to specify either lap time (page E-20) or split time (page E-22) measurement

before you start a stopwatch operation.

•



If you want to measure total elapsed time, select split time measurement.

To specify lap time or split time readings

1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.

• Make sure that LAP (lap times) or SPL (split times) is shown in the lower digital

display.

• If you need to reset the stopwatch to all zeros, press $.

2. You can toggle between LAP (lap times) and SPL (split times) by pressing

$

.

$

E-19

Elapsed Time Measurement

Use the following procedure to measure elapsed time, without taking lap time or split

time readings.

To perform elapsed time measurement

Select split time (SPL) measurement and then perform the following button operations.

'

Start

➝ '

Stop

➝ $

Reset

•



If you have a distance value (page E-15) specifi ed for the current elapsed time

measurement, the upper display segments and speed hand will indicate the speed

when you press

'

to stop the elapsed time operation.

•



After pressing

'

to stop an elapsed time operation, you could press

'

again to

restart from the point where you left off.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GA-110SR-1AER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GA-110SR-1AER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Casio G-Shock GA-110SR-1AER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Vintage CA-53W-1EF Horloge

Handleiding

Casio G-Shock MRG-B5000D-1ER Horloge

Handleiding

Casio A100WEGG-1AEF Horloge

Handleiding

Casio Timeless Collection LTP-2069D-4AVEF Horloge

Handleiding

Casio Vintage B640WB-1BEF Horloge

Handleiding

Casio Edifice EFS-S540DB-1AEF Horloge

Handleiding

Casio G-Shock DW-5600FF-8ER Horloge

Handleiding

Casio Baby-G MSG-B100DG-9AEF Horloge

Gerelateerde categorieën