Handleiding Casio Pro Trek PRW-6000-1ER Horloge

Handleiding

MO1409-EC

© 2014 CASIO COMPUTER CO., LTD.

Congratulations upon your selection of this CASIO watch.

Applications

The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.

Measured values are then shown on the display. Such features make this watch useful when hiking,

mountain climbing, or when engaging in other such outdoor activities.

Warning !

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

•

When engaging in mountain climbing or other activities in which losing your way can create a

dangerous or life-threatening situation, always use a second compass to confi rm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

E E-1

ENGLISH

Important!

• The watch’s Altimeter Mode calculates and displays relative altitude based on barometric pressure

readings produced by its pressure sensor. This means that readings taken at different times at the

same location may produce different altitude values due to changes in barometric pressure. Also note

that the value displayed by the watch may be different from the actual elevation and/or sea level

elevation indicated for the area where you are located.

• When using the watch’s altimeter while mountain climbing, be sure to perform regular calibration in

accordance with the local altitude (elevation) indications. For more information, see “To specify a

reference altitude value” (page E-57).

• Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or other

activities, be sure always to take along another compass to confi rm readings. If the readings produced

by the digital compass of this watch are different from those of the other compass, perform bidirectional

calibration of the digital compass to ensure more accurate readings.

• Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a

permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or

electrical household appliances (TV, computer, cellphone, etc.)

E-2

About This Manual

• Depending on the model of your watch, digital display text appears

either as dark fi gures on a light background, or light fi gures on a dark

background. All examples in this manual are shown using dark fi gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

Crown

Mode Hand

Second Hand

Minute HandHour Hand

Crown

Mode Hand

Second Hand

Minute HandHour Hand

E-3

Using the Crown

This watch has a lock-type crown.

Important!

• You should keep the crown locked during normal daily use. Leaving the crown unlocked creates the

risk of unintended operations or even damage due to impact.

To lock the crown

1. Push the crown back in (see “To pull out, rotate, or push the crown in”

below).

• Note that attempting to lock the crown when it is not pushed in can

cause unexpected watch operation.

2. Rotate the crown so Mark 3 is aligned with Mark 1.

3. While pushing in on the crown (a), rotate it to the right (b) until it stops,

and align Mark 3 with Mark 2.

Mark 1

Mark 3

Mark 2

b

a

Mark 1

Mark 3

Mark 2

b

a

E-4

4. Gently pull on the crown to make sure it is securely locked and does not come out.

To unlock the crown

Rotate the crown so Mark 3 aligns with Mark 1.

To pull out, rotate, or push the crown in

Important!

• Before performing any of these operations, fi rst unlock the crown.

The illustrations below show the different crown operations.

Pull out Rotate Push in

E-5

High-speed Movement

You can use either of the crown operations described below to move watch hands or indicators at high

speed.

HS1: Can be used to move both hands and display indicators.

HS2: Can be used when setting the hour and minute manually to move the hands at high speed.

To start HS1 high-speed movement

While the crown is pulled out, rotate it rapidly three turns away from you (for

forward movement) or towards you (for reverse movement). High-speed

movement will continue even if you release the crown.

To start HS2 high-speed movement

While HS1 high-speed movement is in progress, again rotate the crown rapidly

three turns in the same direction as the current HS1 movement (away from you

for forward movement or towards you for reverse movement).

E-6

To stop high-speed movement

Rotate the crown in the direction that is opposite that of the current high-speed

movement or press any button.

Note

• If you do not perform any operation for more than two minutes after pulling out the crown, the indicator

shown below will appear and crown operations will become disabled. If this happens, push the crown

back in and then pull it out again to re-enable crown operations.

• Pulling out the crown while the watch is in a mode that does not allow confi guration of any settings will

cause the indicator shown below to appear. If this happens, push the crown back in and lock it.

• The indicator shown below also appears when performing hand home position adjustment. See “Hand

Home Position Adjustment” (page E-39) for more information.

1 second

• You can use high-speed movement in the following cases: when changing the time and/or date setting

in the Timekeeping Mode, World Time Mode, Countdown Timer Mode, or Alarm Mode, or when

performing magnetic declination angle calibration, altitude calibration, barometric pressure calibration,

or temperature calibration operations.

E-7

Things to check before using the watch

1. Check the battery power level.

Hold down

B

for at least two seconds to enter the Timekeeping Mode and display the battery power

level.

The battery power level will be indicated as

H

or

M

on the left

side of the digital display.

Go to step 2.

Power is low. Charge the watch by placing it in a location

where it is exposed to light. For details, see “Charging the

Watch” (page E-13).

NO

YES

YES

Does any one of the following conditions exist?

•

L

flashing on the digital display.

• “

CHARGE

” is flashing on the display.

The watch is charged

sufficiently.

For details about

charging, see

“Charging the Watch”

(page E-13).

NEXT

Battery power

indicator

•

When

L

is fl ashing, the second hand will jump at two-second intervals.

•

When

CHARGE

is fl ashing, all hands will move to and stop at 12 o’clock.

Operation Guide 5365

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Pro Trek PRW-6000-1ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Pro Trek PRW-6000-1ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Casio Pro Trek PRW-6000-1ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio MCW-100H-1AVEF Horloge

Handleiding

Casio Wave Ceptor WV-200RD-1AEF Horloge

Handleiding

Casio G-Shock GW-B5600CD-9ER Horloge

Handleiding

Casio Pro Trek PRJ-B001-1ER Horloge

Handleiding

Casio G-Shock GMD-B800-4ER Horloge

Handleiding

Casio Edifice EFB-730D-7AVUEF Horloge

Handleiding

Casio Vintage AQ-800EG-9AEF Horloge

Handleiding

Casio G-Shock GMC-B2100AD-2AER Horloge

Gerelateerde categorieën