Handleiding CDA KC41 Wastafel

Handleiding

KC41 and KC42 Fitting Instructions

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN LEAD TO PREMATURE PRODUCT FAILURE.

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or

installation of this product. Please note that CDA reserve the right to invalidate the guarantee

supplied with this product following incorrect installation or misuse of the appliance or use in a

commercial environment.

Over Mounting

1. Place the paper template provided carefully into the correct position on the worktop.

2. Cut along the over mount line until the central section of the worktop comes out.

3. Use clear silicone to seal the cut that has been made; liberally spread the silicone onto the

area of the worktop directly adjacent to the hole you have made to the width of the sink rim

that it will come into contact with.

4. Repeat step 3 on the under side of the sink rim itself on the surface that will come into

contact with the worktop.

5. Carefully position so that you avoid unnecessary readjustment of the sink at the moment of

contact.

6. Press down firmly and hold in position for at least 5 minutes applying an even pressure.

7. Ensure the sink is fully sealed and the joint is waterproof by squeezing residual silicone out

from along the line of the joint.

8. Do not use the sink for at least 24 hours once fitted.

9. After 24 hours check to ensure the seal is waterproof.

Under Mounting

1. Place the paper template provided carefully into the correct position on the worktop.

2. Cut along the under mount line until the central section of the worktop comes out.

3. Finish the worktop cut out edge to the desired standard.

4. Turn the worktop upside down on a flat, stable surface. Note this will need to be left in

position for 24 hours.

5. Spread clear silicone liberally on the glazed surface on the rim of the sink ensuring no areas

are left uncovered.

6. Spread clear silicone liberally on the underside of the worktop to the corresponding area

where the rim of the sink will be in contact.

7. Press the sink down into the required position firmly for at least 5 minutes applying even

pressure. Position a weight on the sink to keep it in place.

8. Ensure the sink is fully sealed and the joint is waterproof by squeezing residual silicone out

from along the line of the joint.

9. Do not use the sink for at least 24 hours.

10. 3 metal brackets are provided which should be fixed along the front edge and one on each

side; the edge of the bracket overlaps the sink rim and the other edge fixes to the worktop. If

a stone/granite worktop is being used wooden blocks can be used to affix the clips to secure

the sink; these should be fixed with an epoxy-type adhesive (follow manufacturers’

instructions for Epoxy adhesive use).

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je CDA KC41 Wastafel. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met CDA. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van CDA KC41 Wastafel in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor CDA Wastafels
Meer handleidingen voor Wastafels

Veelgestelde vragen over CDA KC41 Wastafel

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

CDA KVF22L Wastafel

Handleiding

CDA KC12 Wastafel

Handleiding

CDA KG72 Wastafel

Handleiding

CDA KA80 Wastafel

Handleiding

CDA KA82 Wastafel

Handleiding

CDA KA52 Wastafel

Handleiding

CDA KCC24 Wastafel

Handleiding

CDA KG42 Wastafel

Gerelateerde categorieën