Handleiding Crivit IAN 274553 Fietslamp

Handleiding voor je Crivit IAN 274553 Fietslamp nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 1 veelgestelde vraag, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

Technische Daten
Typenbezeichnung: 4233
Nennleistung: 0,3 W
Schutzart: IP44 (nach DIN EN 60598-1)
Batterie: 2 x CR2032, 3 V
Lieferumfang
2 LED-Beleuchtungen
4 Batterien, CR2032 (bereits eingelegt)
1 Montage- und Bedienungsanleitung
Wichtige
Sicherheitshinweise
BEWAHREN SIE ALLE SICHERHEITSHIN-
WEISE UND ANWEISUNGEN FÜR DIE
ZUKUNFT AUF!
Kinder unterschätzen häufig die
Gefahren. Halten Sie Kinder stets
vom Verpackungsmaterial fern.
Das Produkt ist kein Spielzeug.
Dieses Gerät kann von Kindern ab 8 Jahren
und darüber sowie von Personen mit
verringerten physischen, sensorischen oder
mentalen Fähigkeiten
oder Mangel an
Er-
fahrung und Wissen benutzt wer
den, wenn
sie beaufsi
chtigt
oder bezüglich des si
cheren
LED-Beleuchtungsset
Einleitung
Herzlichen Glückwunsch zum Kauf Ihres neuen
Gerätes. Sie haben sich damit für ein hochwertiges
Produkt entschieden. Die Bedienungsanleitung ist
Bestandteil dieses Gerätes. Sie enthält wichtige Hinweise für
Sicherheit, Gebrauch und Entsorgung. Machen Sie sich vor der
Benutzung des Geräts mit allen Bedien- und Sicherheitshinweisen
vertraut. Benutzen Sie das Gerät nur wie beschrieben und für
die angegebenen Einsatzbereiche. Händigen Sie alle Unterlagen
bei Weitergabe des Geräts an Dritte mit aus.
Bestimmungsgemäße Verwendung
Das Produkt ist zur universellen Benutzung beispielsweise im
Bereich Freizeit, Camping und Outdoor geeignet. Die nationa-
len Vorschriften für die Benutzung im Straßenverkehr sind zu be-
achten. Das Produkt ist nicht für den kommerziellen Gebrauch
vorgesehen und nur für den empfohlenen Einsatz zu verwenden.
Zur Raumbeleuchtung im Haushalt ist das Produkt nicht
geeignet.
Teilebeschreibung
1
EIN- / AUS-Taste
2
Batteriefach
3
Silikonschlaufe
4
Isolierstreifen (Batterie)
5
Halterung (Silikonschlaufe)
6
LED-Gehäuse
7
Batterie
8
Batteriefachdeckel
Service
KLB GmbH
Diekbree 8
48157 Münster, Germany
Tel.: +49 2 51 132 37 57
www.klb-service.eu
IAN 274553
KLB-Item No. 14126
Please have your receipt and
the article number (e.g.
IAN 12345) ready as your
proof of purchase when en-
quiring about your product.
Cleaning and Care
Never use harsh cleaning agents or abrasives to prevent
damaging the material.
Use a dry fluff-free cloth when you are cleaning or
polishing the product.
Disposal
The packaging is made of environmentally friendly materials,
which may be disposed of through your local recycling facilities.
Contact your local community or municipal administration for
more details on how to dispose your worn-out product.
Defective or used batteries must be recycled in accordance
with Directive 2006 / 66 / EC.
Return batteries and / or the device to the provided recycling
facilities.
Pb
Improper disposal of batteries can harm
the environment!
Never dispose of batteries in your household waste. They may
contain toxic heavy metals and are subject to hazardous
waste regulations. The chemical symbols of the heavy metals
are: Cd = cadmium, Hg = mercury, Pb = lead. Therefore dis-
pose of used batteries through your municipal collection site.
If necessary, clean the battery and device
contacts before inserting the battery.
Start-up
Note: Remove the insulating strip
4
between the battery
7
and the battery compartment
2
before use. Verify the battery
cover is closed all the way and push it closed, if necessary.
Securing the light
Secure the light as shown in Fig. A.
Switching the light on / off
Push the ON / OFF switch
1
per the chart below to
switch the lighting mode:
1 x ON / side light
2 x Flashing light
3 x Interval flashing light
4 x OFF
Replacing batteries
Replace the batteries
7
as shown in Fig. B.
1. Pull the silicone loop under the bracket
5
.
2. Pull the LED housing
6
forward and out.
3. Remove the black battery cover
8
and replace the two
batteries. Ensure correct polarity according to Fig. B.
Reassemble all parts in reverse order.
Immediately remove drained batteries
from the product. Otherwise there is an
increased risk of leaking.
Always replace all the batteries at the
same time. Check regularly that the
batteries are not leaking.
Regularly check batteries for leaks.
Leaking or damaged batteries may result
in burns upon contact with the skin; always
wear suitable safety gloves!
Remove batteries during extended periods
of non-use.
When inserting the battery ensure that it is
inserted the right way round! This is indi-
cated inside the battery cover. Batteries
may otherwise explode.
Do not exert mechanical loads to batteries.
Avoid contact with the skin, eyes and mu-
cous membranes. In the event of contact
with battery acid, thoroughly flush the
affected area with clean water and seek
immediate medical attention.
Avoid extreme environmental conditions
and temperatures, e.g. above radiators.as
they may affect batteries.
maintenance should not be performed by
children without supervision.
Do not use the device if you detect any
damage.
Do not look into the LED from a close
distance during operation.
Do not look at the LED with an optical
instrument (e.g. magnifier).
The LED lights cannot be replaced.
Safety Instruc tions
for Batteries
RISK OF FATAL
INJURY! Batteries are not intended for
children. Do not leave batteries lying
around. They may otherwise be swallowed
by children or pets. If accidentally swal-
lowed seek immediate medical attention.
EXPLOSION HAZARD! Never
recharge non-rechargeable batter-
ies, short-circuit and / or open
batteries. The battery may overheat, ignite
or explode. Never throw batteries into fire
or water. The batteries may explode.
Protection type: IP44 (per EN 60598-1)
Battery: 2 x CR2032, 3 V
Scope of delivery
2 LED lights
4 Batteries, CR2032 (preinstalled)
1 Instructions for assembly and use
General safety instructions
PLEASE KEEP ALL SAFETY INSTRUCTIONS
AND INSTRUCTIONS FOR USE FOR
FUTURE REFERENCE!
Children underes
timate the dan-
g
ers. Always keep children away
from the packaging material. This
product is not a toy.
This appliance may be used by children
age 8 years and up, as well as by persons
with reduced physical, sensory or mental
capacities, or lacking experience and / or
knowledge, so long as they are supervised
or instructed in the safe use of the appli-
ance and understand the associated risks.
Chil
dren should not be al
lowed to play with
the device. Cleaning and user
LED Light Set
Introduction
Many congratulations on the purchase of your new
appliance. You have selected a high quality prod-
uct. The operating instructions are to be considered
as part of this appliance. They contain important information
about safety, use and disposal. Before using the product, please
familiarise yourself with all the safety information and instruc-
tions for use. Use the product only as described and for the in-
dicated purpose. If you pass the appliance on to anyone else,
please ensure that you also pass on all the documentation.
Intended use
This product is suitable for universal use, e.g. for recreation,
camping and outdoor. Observe national regulations for road
traffic use. This product is not suitable for commercial pur-
poses and may only be used for the recommended applica-
tion. This product is not suitable as residential room lighting.
Parts description
1
ON / OFF button
2
Battery compartment
3
Silicone loop
4
Insulating strip (battery)
5
Holder (silicone loop)
6
LED housing
7
Battery
8
Battery cover
Technical Data
Model designation: 4233
Rated power: 0.3 W
PULL
A
2
1
3
6
5
4
35
2 x
CR2032
2.
1.
3.
B
7
8
6
5
6
LED LIGHT SET
LED LIGHT SET
Operation and Safety Notes
IAN 274553
Article 14126
LED-BELEUCHTUNGSSET
Bedienungs- und Sicherheitshinweise
Download de handleiding in het Nederlands en/of Engels (PDF, 0.17 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Crivit IAN 274553 Fietslamp vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Crivit IAN 274553 Fietslamp?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Crivit IAN 274553 Fietslamp. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Crivit IAN 274553 Fietslamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Crivit. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Crivit IAN 274553 Fietslamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Crivit
Model IAN 274553
Categorie Fietslampen
Bestandstype PDF
Bestandsgrootte 0.17 MB

Alle handleidingen voor Crivit Fietslampen
Meer handleidingen voor Fietslampen

Veelgestelde vragen over Crivit IAN 274553 Fietslamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Wat is het modelnummer van mijn Crivit product? Geverifieerd

Hoewel sommige Crivit producten een alternatief modelnummer hebben, zijn ze allemaal voorzien van een IAN nummer waarmee het product te indentificeren is.

Ik vind dit nuttig (876) Lees meer
Handleiding Crivit IAN 274553 Fietslamp

Gerelateerde producten

Gerelateerde categorieën