Handleiding DeWalt DCPH820M1 Heggenschaar

Handleiding

3

ENGLISH

Safety Instructions for Extended-Reach

Hedge Trimmers

• Do not use the extended-reach hedge trimmer in

bad weather conditions, especially when there is a

risk of lightning. This decreases the risk of being struck

bylightning.

• To reduce the risk of electrocution, never use near

any electrical power lines. Contact with or use near

power lines may cause serious injury or electric shock

resulting indeath.

• Always use two hands when operating the extended-

reach hedge trimmer. Hold the extended-reach hedge

trimmer with both hands to avoid loss ofcontrol.

• Always use head protection when operating the

extended-reach hedge trimmer overhead. Falling

debris can result in serious personalinjury. Use a hard hat

compliant with ANSI Z89.1 (CAN/CSA Z94.1).



CAUTION: Do not expose torain.

Important Safety Rules



WARNING: Read and understand all instructions.

Failure to follow all instructions listed below may result

in electric shock, fire and/or serious personalinjury.

SAVE THESE INSTRUCTIONS

Hedge Trimmer Safety Warnings

• Use both hands when operating the hedge trimmer.

Using one hand could cause loss of control and result in

serious personalinjury.

• Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold material

to be cut when blades are moving. Make sure

the switch is off when clearing jammed material.

Blades coast after turn off. A moment of inattention

while operating the hedge trimmer may result in serious

personalinjury.

• Carry the hedge trimmer by the switch handle with

the cutter blade stopped. Proper handling of the hedge

trimmer will reduce possible personal injury from the

cutterblades.

• Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring. Cutter blades contacting a "live" wire may make

exposed metal parts of the power tool "live" and could give

the operator an electricshock.

• Check the hedge for foreign objects, e.g. wirefences.



DANGER: Keep hands away from blade. Contact

with blade will result in serious personalinjury.



WARNING: Wear eyeprotection.



WARNING: Do not expose torain.

that may affect the power tool’s operation. If

damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained

powertools.

f ) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier tocontrol.

g ) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking

into account the working conditions and the

work to be performed. Use of the power tool for

operations different from those intended could result

in a hazardoussituation.

h ) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpectedsituations.

5) Battery Tool Use and Care

a ) Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another batterypack.

b ) Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury andfire.

c ) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or afire.

d ) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

orburns.

e ) Do not use a battery pack or tool that is

damaged or modified. Damaged or modified

batteries may exhibit unpredictable behavior resulting

in fire, explosion or risk ofinjury.

f ) Do not expose a battery pack or tool to

fire or excessive temperature. Exposure to

fire or temperature above 265 °F (130°C) may

causeexplosion.

g ) Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specified in the instructions.

Charging improperly or at temperatures outside the

specified range may damage the battery and increase

the risk of fire.

6) Service

a ) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool ismaintained.

b ) Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized serviceproviders.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je DeWalt DCPH820M1 Heggenschaar. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met DeWalt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van DeWalt DCPH820M1 Heggenschaar in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor DeWalt Heggenscharen
Meer handleidingen voor Heggenscharen

Veelgestelde vragen over DeWalt DCPH820M1 Heggenschaar

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

DeWalt DCPH820B Heggenschaar

Handleiding

DeWalt DCHT820P1 Heggenschaar

Handleiding

DeWalt DCHT820B Heggenschaar

Handleiding

Powerplus POWEG4500 Heggenschaar

Handleiding

Powerplus POWXG50300 Heggenschaar

Handleiding

Ryobi RHT1855R40F Heggenschaar

Handleiding

Metabo AHS 18-45 V Heggenschaar

Handleiding

Vonroc HT504AC Heggenschaar

Gerelateerde categorieën