Handleiding Dimplex DEE 2402 Boiler

Handleiding voor je Dimplex DEE 2402 Boiler nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 5 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

4
Assemble the instantaneous water heater as shown in
the illustrations. Observe the information in the text.
Safety information
The instantaneous water heater must only be
connected and started up by an authorised technician.
The statutory regulations of the respective country, as well
as those of the local electricity and water suppliers must
be adhered to.
The instantaneous water heater is an appliance of protec-
tion class
I
and
must
be connected to the protective earth
conductor.
The unit have to be connected durably to the mains
electricity supply via an all pole disconnecting device with
contact gap must be at least 3 mm.
The instantaneous water heater is suitable for enclosed
(pressurised) operation only.
The tap fittings must be permitted for operation with
enclosed (pressurised) instantaneous water heaters.
The instantaneous water heater must only be connected
to a cold-water pipe.
The instantaneous water heater is suitable for connection
to DVGW-tested plastic pipes.
The instantaneous water heater must only be installed
in a frost-free room.
Prior to installation, the electric connecting cable
must be disconnected from the mains voltage and
the water supply cut off!
Only connect the electric supply after the water
supply.
When making holes in the rear panel, only make the
number of holes required for installation. If the appliance
is reinstalled, any holes that are not used must be made
watertight.
Live components must not be touched subsequent to
installation.
Assembly
Unpacking/removing the
housing cover
Unpack the appliance and check for transportation
damage.
Dispose of the packaging and, where applicable, the old
appliance, in an environmentally conscious manner.
Preparation for assembly
Wall-mounted assembly
The instantaneous water heater must be fitted securely to
the wall. If required, secure the appliance using the lower
adjusting screws.
The distance from the wall is variable. This allows you to
compensate for any unevenness in the wall surface.
The sleeve in the rear panel must fit tightly round the con-
nection cable. If the sleeve is damaged during installation,
the holes must be sealed water-tight.
Water supply
The flow-through heater must be vented. Open the
warm water tap completely and allow to flow through
for one minute.
Electric supply
The mains connection can either be mounted above or
below. At least 40 mm of the connecting cord’s insulating
jacket must be clamped inside the appliance.
Startup
For low water line pressure, remove the flow limiter (see
Supplementary Information A).
Instruct the user with regard to the operation of the
instantaneous water heater.
Separate the required language version from the rest of
the operating instructions. This can be kept in the swing-
out control panel of the instantaneous water heater.
Additional information
If the flow-through heater does not achieve adequate
flow as a result of water line pressure that is too low
in your house installation, remove the flow limiter.
Priority circuit for the combination with electro-
storage heating units:
For operation with the priority circuit, a special load
reducing relay (special accessory) is required. Other
already existing load reducing relays with the
exception of electronic load reducing relays could
cause malfunctions.
Status Indicator in the Heater
I.
LED Heater Status
Off Off
On Ready
Slow blinking (1/s) Heating
II.
III.
IV.
V.
VI.
A
B
C
GB
Download de handleiding in het Nederlands en/of Engels (PDF, 0.99 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Dimplex DEE 2402 Boiler. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Dimplex. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Dimplex DEE 2402 Boiler in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Dimplex
Model DEE 2402
Categorie Boilers
Bestandstype PDF
Bestandsgrootte 0.99 MB

Alle handleidingen voor Dimplex Boilers
Meer handleidingen voor Boilers

Veelgestelde vragen over Dimplex DEE 2402 Boiler

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Mijn boiler geeft alleen lauw water, hoe kan dat? Geverifieerd

Dit is waarschijnlijk een teken dat de thermostaat defect is. Neem contact op met de fabrikant voor advies.

Ik vind dit nuttig (1128) Lees meer

Er komt water uit het overdrukventiel, is dat normaal? Geverifieerd

Ja, een boiler is een drukvat. Als de druk te hoog wordt dan zal de boiler dit verlagen door water af te voeren via het overdrukventiel. Degene die de boiler heeft geïnstalleerd zou goede afvoer moeten hebben aangelegd.

Ik vind dit nuttig (397) Lees meer

Heeft het zin om mijn boiler tijdens afwezigheid of vakantie uit te schakelen? Geverifieerd

Veel moderne boilers zijn erg energiezuinig. Bij een afwezigheid of vakantie van korter dan 1 week kost het dan vaak meer om het water weer op te warmen dan om het gedurende die periode warm te houden. Bij erg lange afwezigheid kan het zuiniger zijn de boiler uit te schakelen.

Ik vind dit nuttig (392) Lees meer

Waar kan ik mijn boiler het beste plaatsen? Geverifieerd

De boiler kan het beste geplaatst worden in de buurt van het punt waar het meeste warme water gebruikt gaat worden (bijv: badkamer). Zo is er sneller warm water en is er minimaal warmteverlies.

Ik vind dit nuttig (216) Lees meer

Wat is het verschil tussen een boiler en een geiser? Geverifieerd

Een boiler verwarmt het water voordat je het wilt gebruiken in de boiler. Bij een geiser wordt het water slechts verwarmt dat er doorheen stroomt wanneer je de kraan opendraait. Hierdoor kan het warme water bij een boiler op zijn wanneer alle voorraad is verbruikt. Daarnaast is het water dat uit een boiler komt direct warm, waarbij het water uit een geiser eerst koud is.

Ik vind dit nuttig (158) Lees meer

Beoordeling

Laat ons weten wat je van de Dimplex DEE 2402 Boiler vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Dimplex DEE 2402 Boiler?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Dimplex DEE 2402 Boiler. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Handleiding Dimplex DEE 2402 Boiler

Gerelateerde producten

Gerelateerde categorieën

×
Download