Home > Audio, TV & Foto > Afstandsbedieningen > Funai Afstandsbedieningen > Funai Catalyst 48 Afstandsbediening

Handleiding Funai Catalyst 48 Afstandsbediening

Handleiding voor je Funai Catalyst 48 Afstandsbediening nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 6 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

INTRODUCTION

The Catalyst™ 48 Universal Remote

Control,developed by Universal

Electronics,Inc.for Funai, is the complete

solution for all of your remote control

requirements. It is designed to operate

from four to eight devices with the

emphasis on features and functions of

your dedicated component(s).

The Catalyst 48 requires two (2) fresh

AA alkaline batteries (not included)

and some easy programming to control

your devices. For best results, please

read and perform all instructions listed

here.Also, keep these instructions for

future reference.

FEATURES AND FUNCTIONS

Use the Key Charts to learn how the

Catalyst 48 functions.

Key Charts

The LED (red light)

blinks to show that

the remote control is

working and is

sending signals.

Use

SETUP for all

programming

sequences.

Press

PWR once to

turn on or off the

selected home enter-

tainment component.

Press

AUX, CBL, VCR,

TV, SAT, CD, AMP,or

TNR once to select a

home entertainment

component to control.

Use the keypad (

0 ~ 9)

to directly select

channels (for example,

09 or 31).

Press

MUTE once to

turn sound off

or on.

Press

ENTER once after

entering channel

numbers on some TV

models.

Use

VOL + (or VOL -)

to raise (or lower) the

sound volume.

Use CH + (or CH -) to

select the next higher

(or lower) channel.

Press LAST once to

recall the last channel

and to page back one

screen in the

main menu.

Press

SLEEP to activate

your TV’s sleep timer.

Or if none is available,

press

SLEEP to activate

the Catalyst 48’s sleep

timer for automatic

shut-off of your TV.

Each key press (up to

four) add 15 minutes

to the sleep timer.

Press

INPUT once to

switch the input of the

chosen component.

Use

GUIDE to display

the program guide.

Use

EXIT to exit out of

the selected compo-

nent’s menu or guide.

Use the cursor keys to

move the cursor in

the program guide and

menu screens.

Use

SELECT to choose

options from your

selected component’s

menu or guide.

Use

INFO to display

current channel and

program information.

Press

MENU to access

the menu of your

chosen component.

Use the transport

keys to control

your VCR, or CD or

DVD player.

Use these keys for

specific features on

your dedicated

components.

INSTALLING BATTERIES

1. On the back of the Catalyst 48, push

the tab and lift off the battery cover.

2. Obtain two (2) fully-charged AA

alkaline batteries. Match the + and –

marks on the batteries to the + and

– marks in the battery case, then

insert the new batteries.

3. Press the battery cover back into

place.The tab should click when the

cover is locked.

4. Test the unit by pressing

PWR and

any mode key (e.g.,

AUX, CBL, VCR,

etc.). If the batteries are inserted cor-

rectly,the LED will blink once.

NOTE: When batteries need replacement,

the Catalyst 48 will blink twice with every

key press. Simply replace them and the

remote control will be restored to its full

functionality, including favorite settings.

PROGRAMMING

COMPONENT CONTROL

The Catalyst 48 can control up to eight

different components. Perform the fol-

lowing instructions for each component

you want controlled:

NOTE: For TV/VCR Combo control, see the

next section.

1. Turn on a component (e.g.,VCR)

and, if applicable, insert media,

(e.g., cassette or disc).

NOTE: Please read steps 2-4 completely

before proceeding. We recommend

highlighting or writing down the codes

and device you wish to program before

moving onto step 2.

2. On the Catalyst 48, press a component

key once (i.e.,

AUX,CBL,VCR,TV, SAT,

CD, AMP,or TNR). Press and hold

SETUP until the LED blinks twice,

then release

SETUP.

3. Use the

Manufacturer’s Codes (on the

back side) to locate the the type of

component and brand name and

then enter the first four-digit code

for your component. If performed

correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, then

repeat steps 2 through 3 and try entering

the same code again.

4. Aim the Catalyst 48 at the component

and press

PWR once. It should turn

off.If it does not respond,repeat steps

2-3, trying each code for your brand

until you find one that works. If it still

does not work, try searching for the

code (see

Searching For Your Code).

NOTE: If the device does not have a PWR

key, press PLAY.

5. Repeat steps 1 through 4 for each

component you want the Catalyst 48

to control.

PROGRAMMING

TV/VCR COMBO CONTROL

Perform the following instructions to

control a TV/VCR Combo:

1. Turn on the TV/VCR Combo and

insert a video cassette.

NOTE: Please read steps 2-4 completely

before proceeding. We recommend

highlighting or writing down the code

for the brand you wish to program

before moving onto step 2.

2. On the Catalyst 48,press VCR.Press

and hold

SETUP until the LED blinks

twice, then release

SETUP.

3. Use the

Setup Codes For TV/VCR

Combos

(on the back side) to locate

the brand name and then enter the

first four-digit code for your compo-

nent.If performed correctly, the LED

will blink twice.

NOTE: If the LED did not blink twice, then

repeat steps 2 through 3 and try entering

the same code again.

4. Aim the Catalyst 48 at the component

and press

PWR once. It should turn

off.If it does not respond,repeat steps

2-3, trying each code for your brand

until you find one that works. If it still

does not work, try searching for the

code (see

Searching For Your Code).

NOTE: If the device does not have a PWR

key, press PLAY.

5. If you’ve located a setup code that

works, but it has a separate TV code,

you’ll also need to program it into the

Catalyst 48 to access volume control

as follows:

a. Press

TV once. The LED will

blink twice.

b. Enter the TV code for your

TV/VCR Combo.If correct, the

LED will blink twice.

If there is no separate TV code listed,

you will need to perform the follow-

ing steps to access volume control:

a. Press and hold

SETUP until the

LED blinks twice, then release

SETUP.

b. Enter

9 - 9 - 3 . The LED will

blink twice.

c. Press

VCR once. The LED will

blink twice.

SEARCHING FOR YOUR CODE

If your device does not respond to the

Catalyst 48 after trying all codes listed

for your brand, or if your brand is not

listed at all, try searching for your code.

For example, to search for a code for

your TV:

1. On the Catalyst 48,press

TV once.

2. Press and hold

SETUP until the LED

blinks twice, then release

SETUP.

3. Enter

9 - 9 - 1.The LED will

blink twice.

4. Aim the remote control at the the

TV and slowly alternate between

pressing PWR and TV. Stop when the

TV turns off.

NOTE: In the search mode, the

Catalyst 48 will send IR codes from its

library to the selected device, starting

with the most popular code first.

5. Press SETUP once to lock in the code.

6. To search for the codes of your other

components, repeat steps 1 through

5, but substitute the appropriate key

(i.e., AUX,CBL,VCR,SAT,CD, AMP,or

TNR) for the (Auxiliary,VCR, Cable,

Satellite, CD, Amplifier, or Tuner)

component you are searching for.

CHECKING THE CODES

If you have set up the Catalyst 48 using

the

Searching For Your Code procedure,

you may need to find out which four-

digit code is operating your equipment:

For example, to find out which code is

operating your TV:

1. On the Catalyst 48,press

TV once.

2. Press and hold

SETUP until the LED

blinks twice, then release

SETUP.

3. Enter

9 - 9 - 0.The LED will

blink twice.

4. To view the code for the first digit,

press

1 once.Wait 3 seconds, count

the LED blinks (e.g., 3 blinks = 3)

and write down the number.

NOTE: If a code digit is “0”, the LED

will not blink.

5. Repeat step 4 three more times for

remaining digits. Use

2 for the sec-

ond digit,

3 for the third digit, and 4

for the fourth digit.

6. To check for the codes of your other

components, repeat steps 1 through

5, but substitute the appropriate key

(i.e., AUX,CBL,VCR,SAT, CD, AMP,or

TNR) component you are checking.

As before, write down each four-

digit code.

RE-ASSIGNING DEVICE KEYS

The Catalyst 48 can be set up to control a

second TV or VCR, or any combination of

eight home entertainment components.

For example, to have the Catalyst 48 con-

trol a TV, a Cable Converter, and two

VCRs, you will need to re-assign the

unused

AUX key to operate the second

VCR as follows:

1. On the Catalyst 48,press and hold

SETUP until the LED blinks twice,

then release

SETUP.

2. Enter

9 - 9 - 2.The LED will

blink twice.

3. Press

VCR once, then press AUX once.

4. The

AUX key is now ready to be pro-

grammed for your second VCR. See

Programming Component Control.

To re-assign other device keys, repeat

steps 1 through 4 by substituting the key

sequence from the below chart for the

most popular components:

To Re-Assign Key

Sequence Perform

TV as 2nd VCR key: SETUP - 9 - 9

- 2 - VCR - TV

as 2nd CBL key: SETUP - 9 - 9

- 2 - CBL - TV

as 2nd AUX key: SETUP - 9 - 9

- 2 - AUX - TV

as 2nd TNR key: SETUP - 9 - 9

- 2 - TNR - TV

as 2nd AMP key: SETUP - 9 - 9

- 2 - AMP - TV

as 2nd CD key: SETUP - 9 - 9

- 2 - CD - TV

as 2nd SAT key: SETUP - 9 - 9

- 2 - SAT - TV

back to TV: SETUP - 9 - 9

- 2 - TV - TV

VCR

as 2nd TV key: SETUP - 9 - 9

- 2 - TV - VCR

VCR

as 2nd CBL key: SETUP - 9 - 9

- 2 - CBL - VCR

VCR

as 2nd AUX key: SETUP - 9 - 9

- 2 - AUX - VCR

VCR

as 2nd TNR key: SETUP - 9 - 9

- 2 - TNR - VCR

VCR

as 2nd AMP key: SETUP - 9 - 9

- 2 - AMP - VCR

VCR

as 2nd CD key: SETUP - 9 - 9

- 2 - CD - VCR

VCR

as 2nd SAT key: SETUP - 9 - 9

- 2 - SAT - VCR

VCR

back to VCR: SETUP - 9 - 9

- 2 - VCR - VCR

AUX

as 2nd TV key: SETUP - 9 - 9

- 2 - TV- AUX

AUX

as 2nd VCR key: SETUP - 9 - 9

- 2 - VCR - AUX

AUX

as 2nd CBL key: SETUP - 9 - 9

- 2 - CBL - AUX

AUX

as 2nd TNR key: SETUP - 9 - 9

- 2 - TNR - AUX

AUX

as 2nd AMP key: SETUP - 9 - 9

- 2 - AMP - AUX

AUX

as 2nd CD key: SETUP - 9 - 9

- 2 - CD - AUX

AUX

as 2nd SAT key: SETUP - 9 - 9

- 2 - SAT - AUX

AUX

back to AUX: SETUP - 9 - 9

- 2 - AUX - AUX

When a re-assignment is done,the LED

will blink twice to confirm your choice.

At that time, you will need to program the

Catalyst 48 to control the new component

(see

Programming Component Control).

CHANGING VOLUME LOCK

The Catalyst 48 is set to control volume

of a component through your TV while

in the TV,VCR,Cable,or Satellite mode.

However, in an Audio mode (i.e.,

TNR,

AMP,or CD), you have separate control of

your audio component’s volume.

If your TV is not remote controllable,or

if you want volume to be controlled by a

different component, you can change the

Volume Lock setting to control a volume

through a non-associated mode (e.g.,

through the cable in the TV mode).

To change Volume Lock to the

another mode:

1. On the Catalyst 48,press and hold

SETUP until the LED blinks twice,

then release

SETUP.

2. Enter

9 - 9 - 3 and then press any

mode key once (except

TV). The LED

will blink twice.

3. Now, whenever you press

VOL +,

VOL –,or MUTE,volume will be con-

trolled by your mode choice.

To change Volume Lock back to the

TV mode:

1. On the Catalyst 48,press and hold

SETUP until the LED blinks twice,

then release

SETUP.

2. Enter

9 - 9 - 3 and then press TV.

The LED will blink twice.

3. Now, whenever you press

VOL +,

VOL –,or MUTE on the Catalyst 48,

volume will be controlled by your TV.

TROUBLESHOOTING

PROBLEM: LED does not blink when

you press a key.

SOLUTION: Replace the batteries with

two (2) new AA alkaline

batteries.

PROBLEM: LED blinks when you

press a key, but home

entertainment component

does not respond.

SOLUTION: Make sure the Catalyst 48

is aimed at your home

entertainment component

and is not farther than

15 feet away.

PROBLEM: Catalyst 48 does not con-

trol home entertainment

components or commands

are not working properly.

SOLUTION: Try all listed codes for the

component brands being

set up. Make sure they

can be operated with an

infrared remote control.

PROBLEM: TV/VCR combo does not

respond properly.

SOLUTION: Use the VCR codes for

your brand. Some combo

units may require both a

TV code and a VCR code

for full operation.

PROBLEM: No volume on a 2nd TV.

SOLUTION: Follow instructions in

Changing Volume Lock.

PROBLEM:

CH+ , CH

,and LAST do

not work for your RCA TV.

SOLUTION: Due to RCA design (1983-

1987), only the original

remote control will oper-

ate these functions.

PROBLEM: Changing channels does

not work properly.

SOLUTION: If original remote control

required pressing ENTER

to change channels, press

ENTER on the Catalyst 48

after entering the

channel number.

PROBLEM: Tried “Search Method”

and still could not find a

working code.

SOLUTION: Try the “Search Method”

again after clearing out

the device key as follows:

Press and hold

SETUP

until the red light blinks

twice, then release. Next

enter

9 - 9 - 2.Then press

and release the device key

to be cleared twice.

Continued on back...

Fold Fold

Fold

CATALYST

™

UNIVERSAL REMOTE CONTROL

USER GUIDE

Cat48_Funai_Mnl 9/28/04 1:20 PM Page 1

Beoordeling

Laat ons weten wat je van de Funai Catalyst 48 Afstandsbediening vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Funai Catalyst 48 Afstandsbediening?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Funai Catalyst 48 Afstandsbediening. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Funai Catalyst 48 Afstandsbediening. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Funai. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Funai Catalyst 48 Afstandsbediening in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk	Funai
Model	Catalyst 48
Categorie	Afstandsbedieningen
Bestandstype	PDF
Bestandsgrootte	0.25 MB

Alle handleidingen voor Funai Afstandsbedieningen
Meer handleidingen voor Afstandsbedieningen

Veelgestelde vragen over Funai Catalyst 48 Afstandsbediening

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Hoe koppel ik een universele afstandsbediening aan mijn televisie? Geverifieerd

Om je universele afstandsbediening te koppelen heb je zowel het modelnummer en het merk van de afstandsbediening als die van de televisie nodig. In de handleiding van de afstandsbediening is een lijst te vinden met merken en/of modelnummers met een bijbehorende code.

Ik vind dit nuttig (7279) Lees meer

Waarom staan er letters bij de cijfers op de afstandsbediening? Geverifieerd

Het kan mogelijk zijn dat het voor bepaalde instellingen van de televisie nodig is om letters in te voeren. Er staan doorgaans drie letters of andere tekens op een knop. Wanneer letterinvoer nodig is, kan er 1 keer op die knop gedrukt worden worden de eerste letter, 2 keer gedrukt voor de tweede letter en 3 keer gedrukt voor de derde letter. Zo kan er tekst geschreven worden met een minimaal aantal knoppen.

Ik vind dit nuttig (572) Lees meer

Werkt mijn afstandsbediening ook op andere modellen televisie van hetzelfde merk? Geverifieerd

Vaak werkt een afstandsbediening van een televisie ook op vergelijkbare modellen van hetzelfde merk. Het is echter ongebruikelijk dat hij op alle modellen van dat merk werkt. Universele afstandsbedieningen zijn daar beter voor geschikt.

Ik vind dit nuttig (416) Lees meer

Wat is het gemiddelde bereik van een infrarood afstandsbediening? Geverifieerd

Een gemiddelde infrarood afstandsbediening heeft een bereik van tussen de 3 en 6 meter. Het is ook zo dat hoe verder weg het apparaat staat, hoe moeilijker het is om te mikken.

Ik vind dit nuttig (357) Lees meer

Er is een batterij in mijn apparaat gaan oxideren, kan ik het nog veilig gebruiken? Geverifieerd

Ja, het apparaat kan nog veilig gebruikt worden. Verwijder eerst de geoxideerde batterij. Doet dit niet met blote handen. Reinig daarna het batterijcompartiment met een wattenstaafje gedipt in azijn of citroensap. Laat het drogen en doe nieuwe batterijen in het apparaat.

Ik vind dit nuttig (254) Lees meer

Kan ik een verwisselbare batterij een lange tijd in een apparaat laten? Geverifieerd

Verwisselbare batterijen kunnen een lange periode in een apparaat blijven indien dit apparaat gebruikt wordt. Als een apparaat voor een lange periode wordt opgeslagen is het aan te raden de batterijen er uit te halen om oxidatie te voorkomen.

Ik vind dit nuttig (203) Lees meer