Handleiding Futaba FP-5NLH RC Controller

Handleiding

Futaba

DIGITAL PROPORTIONAL

RADIO CONTROL

INSTRUCTION MANUAL

FM

D60400

Thank you for purchasing a Futaba digital proportional

radio control set.

Please read this manual carefully before using your set.

FEATURES OF FP-5NLH

The FP-5NLH for helicopters is an FM proportional radio con-

trol

set

for helicopters

with

an

ergonomic

case

crested

as

a

result of the exhaustive pursuit of easier operation. Newly de-

signed sticks for smooth and positive operation, servo revers-

ing switches for all channels, aileron and elevator AST (Ad-

justable

Servo

Throw),

pitch

control

trim,

idle up,

and

other

innovations based on the opinions of many RC modelers.

TRANSMITTER FP-T5NLH

• Reliability substantially improved by using industrial robots to as-

semble the PC board.

• Servo reversing switch for each channel. Servos are reversed by using

this switch

• Aileron and elevator AST (Adjustable Servo Throw). Servo throw can

be set as desired.

• Easy-to-adjust two knob type revolution mixing. Throttle pitch con-

trol rudder mixing.

• Pitch control trimmer. Approximately 30% of the pitch control servo

throw can be trimmed, this allows optimum pitch control of the

model.

• Throttle hold switch and trimmer for auto rotation.

• This allows the Rotor r.p.m. to maintained at an effective control

speed, even when the pitch is reduced, allowing maneuvers which

were impossible in the past to be performed.

• Newly designed open gimbal sticks operate smoothly and reliably.

Spring tension mechanism allows adjustment of the operating feel of

the stick lever.

• Nonslip adjustable lever head allows adjustment of the stick length as

desired.

• Throttle ATL. Adjustable throttle limiter type throttle trim. As the

high

side

does

not

change

even

when

the

trim

is

altered,

it

is

very

convenient when connecting the linkage, etc.

• RF PC board module system.

• Functional case, created as a result of the exhaustive pursuit of easier

operation, has evolved a thick case which fits into the palm of the

hand.

• Square level meter at the transmitter indicates the power supply

voltage.

• Excellent radiation efficiency, strong 8-stage telescoping antenna.

• Neck strap bracket provided as standard. Operation is easier if the

transmitter is hung from your neck by using the optional neck strap.

• Built-in NiCad battery.

RECEIVER FP-R107N

• Compact, high performance FM 7-channel receiver with PC board

space reduced to a minimum.

•Special IF amp for radio communications improves the effective

receiving range stability.

• Narrow band ceramic filter improves rejection of adjacent channel

interference.

• Futaba original squelch circuit reduces erroneous operation by weak

signals (when passing a dead point, etc.) and erroneous operation by

natural noise when no signals are being received.

• Large capacitor copes with voltage changes when a battery is used.

• Vibration-resistant pin connectors.

• Fiberglass epoxy PC board with thru-the-hole plating is vibration and

shock resistant.

SERVO FP-S130

SMALL, RUGGED, HIGH NEUTRAL SERVO

• Small, double ball bearing, water-tight & dusttight servo. High output

torque 55.6 oz-in (4kg-cm), high-speed 0.24sec/60°

• New indirect drive potentiometer improves vibration and shock resist-

ance and neutral accuracy.

• Futaba low-power custom 1C provides extremely high torque, narrow

dead band, and superior tracking.

• Fiberglass reinforced PBT (polybutylene terephthalate) injection

molded servo case is mechanically strong and invulnerable to glow

fuel.

• Strong polyacetal resin ultra-precision servo gear features smooth

operation, positive neutral, and very little backlash.

• Fiberglass reinforced epoxy resin PC board with thru-the-hole plating

improves servo amp vibration and shock resistance.

• Three pin connector eliminates faulty contact and improves reliability

against vibration and shock. Housing has a reverse insertion preven-

tion mechanism.

• Special grommet simplifies mounting of the servo and has an excel-

lent cushioning effect.

• Six special adjustable splined horns.

SET CONTENTS AND RATINGS

(Specifications are subject to change without prior notice.)

Transmitter

Receiver

Servo

NiCad battery

Switch

Others

PCM

FP-T5NLH x 1

FP-R107N x 1

FP-S130 x 4

NR-4J x 1

SSW-J

Charger, Ribbon, Spare horn. Mounting screw.

FP-5NLH

TRANSMITTER FP-T5NLH

2 stick, 5 channels w/servo reverse, aileron

and elevator AST, helicopter mechanism

72MHz band.53MHz band

FM (Frequency modulation)

9.6 volts NiCad battery (NT-8LP)

170mA (at 12V)

Operating system

Transmitting frequency

Modulation system

Power requirement

Current drain

RECEIVER FP-R107N

72MHz band .53MHz band

Receiving frequency

Intermediate frequency

Power requirement

Current drain

Dimensions

Weight

Receiving range

455kHz

4.8V, NiCad battery (common use with servo)

13.5mA (4.8V reception)

1.38 x 2.42 x 0.8 in (35.2 x 61.7 x 20.3mm)

1.55oz (43g)

550 yards (500m) on the ground, 1,100 yard

(1000m) in the air. [FP-T5NLH]

(at the best conditions)

SERVO FP-S130

+pulse width control

Control system

Operating angle

Power requirement

Current drain (IDLE)

Output torque

Operating speed

Dimensions

Weight

One side 45° or more (at idle)

4.8V (Shared with receiver)

5.0V,

8mA

55.6 oz.in (4kg-cm)

0.24sec/60°

1.52 x 0.77 x 1.36 in (38.5 x 19.5 x 34.5mm)

1.47oz (42g)

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Futaba FP-5NLH RC Controller. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Futaba. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Futaba FP-5NLH RC Controller in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Futaba RC Controllers
Meer handleidingen voor RC Controllers