Futaba
DIGITAL PROPORTIONAL
RADIO CONTROL
FM
D60399
Thank you for purchasing a Futaba digital proportional radio control set.
Please read this manual carefully before using your set.
FEATURES OF FP-6NLK/5NLK
The FP-6NLK and FP-5NLK are 6 channel (6NLK) and 5
channel (5NLK) FM proportional radio control set with a
ergonomic case created as a result of the exhaustive pursuit
of easier operation, newly designed sticks tor smooth and
positive operation, servo reversing switch for each channel,
and other innovations based on the opinions and needs of
many RC modelers.
Please read this manual before using your new set.
TRANSMITTER FP-T6NLK/T5NLK
• Reliability substantially improved by using industrial robots
to assemble the PC board.
• Servo reversing switch for each channel. Servos are reversed
by using this switch.
• Newly designed open gimbal sticks operate smoothly and
positively.
Spring tension mechanism
allows adjustment of the operat-
ing
feel of the stick lever.
•Nonslip
adjustable
lever
head allows adjustment
of
the stick
length as desired.
• RF PC board module style system in transmitter. (Internal
only)
• Functional case, created as a result of the exhaustive pursuit
of
easier
operation,
has
evolved
a
thick
case
which
fits
into
the palm of the hand.
•Aileron, Elevator dual rate function. (Dual rate ON, OFF)
• Easy to read square transmitter battery voltage/output level
meter.
• Excellent radiation efficiency, strong 8-stage telescoping
antenna.
• Neck strap bracket provided as standard. Operation is easier
if the transmitter is hung from your neck by using the
optional neck strap.
• Large capacitor copes with voltage changes when a battery is
used.
• Vibration-resistant pin connectors.
• Fiberglass epoxy PC board with thru-the-hole plating is vi-
bration and shock resistant.
SERVO FP-S138
SMALL, RUGGED, HIGH NEUTRAL LOW PROFILE SERVO
• Height is 0.2 in (5.2mm) lower than existing servos of its
type.
• New indirect drive potentiometer improves vibration
and
shock resistance and neutral accuracy.
• Futaba low-power custom 1C provides extremely high
torque, narrow dead band, and superior tracking.
• Fiberglass reinforced PBT (polybutylene terephthalate)
injection molded servo case is mechanically strong and
invulnerable to glow fuel.
• Strong polyacetal resin ultra-precision servo gear features
smooth operation, positive neutral, and very little backlash.
• Fiberglass reinforced epoxy resin PC board with thru-the-
hole plating improves servo amp vibration and shock resist-
ance.
•Three pin connector eliminates faulty contact and improves
reliability against vibration and
shock. Housing has a reverse
insertion prevention mechanism.
•Special grommet simplifies mounting of the servo and has
an excellent cushioning effect.
• Six special adjustable splined
horns.
• Since the output torque is 34.75oz-in (2.5kg.cm) and operat-
ing speed is 0.23sec/6CT, it can be used with almost all
models.
RECEIVER FP-R107N
• Compact, high performance FM 7-channel receiver with PC
board space reduced to a minimum.
•Special IF amp for radio communications improves the
effective receiving range stability.
•Narrow band ceramic filter improves rejection of adjacent
channel interference.
• Futaba original squelch circuit reduces erroneous operation
by
weak
signals
(when
passing
a
dead
point,
etc.)
and
er-
roneous operation by natural noise when no signals are being
received.
SET CONTENTS AND RATINGS
(Specifications are subject to change without prior notice.)
Transmitter
Receiver
Servo
Battery holder
Switch
Others
FP-6NLK
FP-T6NLK x 1
FP-R107N x 1
FP-S138x4
NR-4J x 1
SSW-J x 1
Charger, Frequency flag. Spare horn,
Mounting screw.
FP-5NLK
FP-T5NLK x 1
FP-R107N x 1
FP-S138x4
Praat mee over dit product
Laat hier weten wat jij vindt van de Futaba FP-5NLK RC Controller. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.