Handleiding Gardena EasyCut 420/45 Heggenschaar

Handleiding

d) Store idle power tools out of the reach of

children and do not allow persons unfamil-

iar with the power tool or these instruc-

tions to operate the power tool. Power tools

are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage

of parts and any other condition that may

affect the power tool’s operation. If dam-

aged, have the power tool repaired before

use.

Many accidents are caused by poorly main-

tained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazardous

situation.

5) Service

Have your power tool serviced by a qualified

repair person using only identical replace-

ment parts. This will ensure that the safety of the

power tool is maintained.

Hedge trimmer safety warnings:

• Keep all parts of the body away from the

cutter blade. Do not remove cut material or

hold material to be cut when blades are

moving. Make sure the switch is off when

clearing jammed material. A moment of inat-

tention while operating the hedge trimmer may

result in serious personal injury.

• Carry the hedge trimmer by the handle

with the cutter blade stopped. When trans-

porting or storing the hedge trimmer

always fit the cutting device cover. Proper

handling of the hedge trimmer will reduce pos-

sible personal injury from the cutter blades.

• Hold the power tool by insulated gripping

surfaces only, because the cutter blade

may contact hidden wiring or its own cord.

Cutter blades contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

• Keep cable away from the cutting area.

During operation the cable may be hidden in

shrubs and can be accidentally cut by the

blade.

Additional Safety Recommendations

Warning! Keep toddlers away when you assemble

the unit.

Small parts can be easily swallowed. There is also

a risk that the polybag can suffocate toddlers.

Work area safety

Only use the unit in the manner and for the

functions described in these instructions.

The operator or user is responsible for accidents

or hazards occurring to other people or their

property.

While operation and transport pay special attention

to the hazard for third parties.

Risk of stumbling. While operation pay attention to

the cable.

Warning! When wearing hearing protection,

and due to the noise produced by the unit, the

operator may not notice persons approaching.

Do not use the unit when a thunderstorm is

approaching.

Do not use the unit nearby a water.

Electrical safety

The British Standards Institute recommend the use

of a Residual Current Device (R.C.D.) with a trip-

ping current of not more than 30 mA. Check your

R.C.D. every time you use it.

Before use, examine cable for damage, replace it

if there are signs of damage or ageing.

If the replacement of the supply cord is necessary,

this has to be done by the manufacturer or his

agent in order to avoid a safety hazard.

Do not use the unit if the electric cables are

damaged or worn.

Immediately disconnect from the mains electricity

supply if the cable is cut, or the insulation is dam-

aged. Do not touch the electric cable until the

electrical supply has been disconnected.

Your electric cable must be untangled, tangled

cables can overheat and reduce the efficiency of

your unit.

Always disconnect the mains cable before

disconnecting any plug, cable connector or

extension cable.

Switch off, remove plug from mains and examine

electric supply cable for damage or ageing before

winding cable for storage. Do not repair a dam-

aged cable, send the unit to the next GARDENA

service Center or dealer authorised by GARDENA.

Always wind cable carefully, avoiding kinking.

4

GB

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Gardena EasyCut 420/45 Heggenschaar. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Gardena. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Gardena EasyCut 420/45 Heggenschaar in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Gardena Heggenscharen
Meer handleidingen voor Heggenscharen

Veelgestelde vragen over Gardena EasyCut 420/45 Heggenschaar

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Gardena ComfortCut 600/55 Heggenschaar

Handleiding

Gardena PowerCut 700/65 Heggenschaar

Handleiding

Gardena EasyCut 420/25 Heggenschaar

Handleiding

Gardena ComfortCut 600/50 Heggenschaar

Handleiding

Gardena EasyCut 450/50 Heggenschaar

Handleiding

Gardena ComfortCut 60 Heggenschaar

Handleiding

Gardena THS 42 Heggenschaar

Handleiding

Gardena ComfortCut 30 Heggenschaar

Gerelateerde categorieën