Handleiding Hitachi 32PD7800 Plasma monitor

Handleiding

8

IMAGE RETENTION OF PLASMA DISPLAY

There are different characteristics that result in panel image retention depending on how the plasma display is used.

Situations and effective usage methods related to ghosting are provided below.

Image retention characteristics of a plasma display

The image retention phenomenon of a plasma panel occurs due to partial phosphor degradation arising from partial character and figure

display.

For example, when the character image as shown in Fig. A at the right is

continuously displayed for a long period of time, the only part of the phosphor

(Red,Green, Blue) that will degrade will be the color of the applicable character

display portion. Consequently, when a white image is displayed on the entire

screen as shown in Fig. a, the character marks displayed up to that time will

become a color difference visible to the eye, but the phosphor will never burn.

■ The degree of image retention is proportional to the brightness of the characters and figures displayed as well as the display time.

• The tendency of the phosphor is to degrade more the brighter the characters

and figures are displayed. When images of figures with different levels of

brightness, as shown in Fig. B, are continuously displayed for a long period

of time, it becomes easier for image marks at locations when the brighter

figures are displayed to be noticeable.

* The image retention images in this document are exaggerated for the purpose of explanation. The actual manner in which the image retention

is seen differs depending on the operation time and brightness.

Methods to Reduce the Occurrence of Image Retention

• Lower the Contrast and Brightness settings of the plasma display as much as possible.

A function is provided in the display that controls the brightness of the screen to reduce degradation of the panel. Using this function makes it

possible to reduce image retention.

(Refer to Panel Life (Extend 1.or Extend 2) shown on )

• Set the plasma monitor to an “Screen Wipe” or “Luminance Manager” display.

The occurrence of image retention when displaying images of identical patterns, such as static images, for long periods of time can be

reduced by displaying a completely white screen for about 1 ~ 2 hours after terminating the display. Luminance Manager function works to

reduce image retention when displaying images on the four corners, such as TV station logos and clock display.

(Settings can be made using Screen Wipe and Luminance Manager from Function MENU shown on )

• Using in combination with moving images

Since the degradation of the fluorescent material progresses comparatively uniform for moving images, the occurrence of partial image

retention can be controlled. We recommend to use in combination with moving images such as a DVD.

* Please be careful since image retention will occur if display is left in a two screen display state for a long period of time.

* Television broadcasts include images displayed for long periods of time in which the left and right or top and bottom of the image are cut

and broadcast station name or time are displayed for a long period of time at the same portion of the screen. Image retention in these

portions can be expected to occur, so please be aware.

[Fig. A]

[Fig. B]

[Fig. a]

[Fig. b]

39

39

Notes

About screen defects

• High precision technology is used in the making of plasma panels but there may be dark spots (points that do not illuminate) and bright

spots (points that are too bright) in some cases. These do not indicate a malfunction.

About residual images

• In some cases, residual images may remain after the short-term display of still images and another image is displayed, but these will

disappear and return to normalcy. This is not a malfunction.

About the panel screen

• Plasma displays display images by means of electrical discharges inside the panel. Because of this, the temperature of the panel surface

may rise in some cases.Also, plasma displays are made of finely processed glass. A reinforced glass filter is installed over the panel surface

but avoid strong impact because there is still danger of glass breakage.

About the power swivel

• Do not put hands or faces close to the monitor while operating the swivel function. It could cause a physical injury. Use special caution in

households where children are present. (Refer to Power Swivel shown on )

25

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Hitachi 32PD7800 Plasma monitor. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Hitachi. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Hitachi 32PD7800 Plasma monitor in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Hitachi Plasma monitoren
Meer handleidingen voor Plasma monitoren

Veelgestelde vragen over Hitachi 32PD7800 Plasma monitor

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Hitachi CMP4221U Plasma monitor

Handleiding

Hitachi CMP402HDU Plasma monitor

Handleiding

Hitachi CMP4201U Plasma monitor

Handleiding

Hitachi 42HDW10 Plasma monitor

Handleiding

Hitachi CMP4121HDU Plasma monitor

Handleiding

Hitachi CMP4211U Plasma monitor

Handleiding

Hitachi CMP5000WXU-511 Plasma monitor

Handleiding

Hitachi CMP4120HDUS Plasma monitor

Gerelateerde categorieën