Handleiding Horstmann CentaurPlus C11 Thermostaat

Handleiding

1.SET indicator 9.System ON indicator

2.Time of day 10.SET positions

3.Switch Period symbol 11.PROGRAMME positions

4.SET Button 12.BOOST symbol

5.BOOST or adjust (-) button 13.ADVANCE symbol

6.ADVANCE or adjust (+) button 14.AM/PM symbol

7.ENTER Button 15.PROGRAMME indicator

8.SELECT button

BATTERY

The programmer is fitted with a non-rechargeable, long life battery, which will maintain the

programmed time settings for a minimum of ten months with the supply disconnected.

THIS SHOULD BE SUFFICIENT TO COVER POWER INTERRUPTIONS DURING THE LIFE OF THE UNIT.

During power interruptions the display will be blank, after 3 days the current time of day will be lost.

These measures are to prolong the battery life.

SERVICE AND REPAIR

This programmer is NOT user serviceable. Please do not dismantle the unit.

In the unlikely event of a fault developing please refer to the RESETTINGTHEPROGRAMMERsection of

this user guide located on page 2. If this fails to resolve the problem please contact a local heating

engineer or a qualified electrician.

QUESTIONSANDANSWERS

The unit display has become frozen

The indicator neon fails to illuminate

The indicator neon will illuminate but the

pump and/or boiler fails to

operate

There is no display on the

programmer

How do I know if the programmer is still

under warranty

How is the programmer removed from the

wall

This could be due to local electrical interference

Using the RESET procedure may rectify the fault.

Using the RESET procedure may rectify the fault. If the problem persists the program-

mer will need replacing.

This may indicate a problem elsewhere in your system;

E.g. A zone valve, etc. please contact a registered installer for advice.

Try the RESET procedure on page 2, if this fails to rectify the problem please have the

mains supply checked

The CentaurPlus range comes with a 2 year guarantee from the date of

manufacture. This date is located on the rear of the unit, indicated by a month over a

year

WARNING: The CentaurPlus programmer must only be removed from it’s backplate by

either a qualified electrician or heating engineer; The programmer plugs in to a 6 pin

backplate located on the rear of the unit and is secured using 2 screws located on the

bottom surface of the unit. Undo these screws and pull forward and up in an arc

motion

LEAFLET No P60495

ISSUE 4

FRONT VIEW OF PROGRAMMER

Page 1

Page 4

The following are some of the easy to operate features:-

1 Hour Boost

Advance gives instant On/Off override

Up to 3 On/Off periods per 24Hr operation.

Programme options: Auto / All day / 24 Hours / Off

1

12

9

11

8

10

7654

2

13

14

15

3

Horstmann Controls Limited

Bristol

BS4 1UP

Email: [email protected]k

Website: www.horstmann.co.uk

Horstmann’s CentaurPlus - Single Channel Programmers Offer up

to three programmed operating periods per day with Boost and

Advance control.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Horstmann CentaurPlus C11 Thermostaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Horstmann. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Horstmann CentaurPlus C11 Thermostaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Horstmann Thermostaten
Meer handleidingen voor Thermostaten

Veelgestelde vragen over Horstmann CentaurPlus C11 Thermostaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.