Français
1 2
3English 4
Français
5
English
Gettin
Started Guid
Guide de Démarra
Guía de Inicio Rá
id
Hardware Installation
imply plu
the U
B cable into an open U
B port to be
in usin
your mous
Important Ergonomic Information
Long periods of repetitive motions using an improperly set-up workspace, incorrect body position, and poor work habits may be
associated with physical discomfort and injury to nerves, tendons, and muscles. If you feel pain, numbness, weakness, swelling,
burning, cramping, or stiffness in these areas, see a qualified health professional.
Maintenance of Your Mouse
• You may clean the surface of the Mouse with a soft damp cloth.
• Do not use any harsh or abrasive cleaners.
• Before using any chemical cleaners, please test the results on the bottom of the device.
Troubleshooting
• Tr
another U
B
ort on the com
uter
Switching “Off” the Illumination
You may want to turn “off” the glow by using the “on/off” button under the mouse
International Standards and Safety
This optical device complies with International Standard IEC 825-1: 1993. Class 1 LED Product. CAUTION: Use of controls or
adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This
optical device has no serviceable parts. User observable light is 15 microwatts in normal operation. This device is rated as a
commercial product for operation at 32° F (0° C) to 104° F (40° C).
Customer Service
If you need additional help with you product, contact Labtec at (702) 269-3612 or on the web at: www.labtec.com.
FCC Com
liance and Advisor
Statemen
This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1
this device may not cause harm
ul inter
erence, and 2
this device must accept any inter
erence received,
ncludin
inter
erence that may cause undesired operation. This equipment has been tested and
ound to comply
ith the limits for a Class B di
ital device, pursuant to Part 15 of the FCC Rules. These limits are desi
ned to provide
easonable protection a
ainst harmful interference in a residential installation. This equipment
enerates, uses, and
can radiate radio frequency ener
y and, if not installed or used in accordance with the instructions, may cause
armful interference to radio communications. However, there is no
uarantee that interference will not occur in a
articular installation. If this e
ui
ment does cause harmful interference to radio or television rece
tion, which can
e determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
r more of the followin
measures: 1
reorient or relocate the receivin
antenna; 2
increase the separation between
he equipment and the receiver; 3
connect the equipment to an outlet on a circuit di
erent
rom that to which the
eceiver is connected; 4
consult the dealer or an experienced radio/TV technician for help. Any chan
es or
modi
ications not ex
ressl
a
roved b
the
art
res
onsible
or com
liance could void the user’s authorit
to
perate the equipment. Where shielded interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the product, they must be used in
rder to ensure compliance with F
re
ulations
n
i
n D
t
t
m
nt
This di
ital device does not exceed the Class B limits for radio noise emissions from di
ital apparatus specified in the
nterference-causin
equipment standard entitled “Di
ital Apparatus,” ICES-003 of the Department of Communications.
This device complies with RSS-210 of Industry and Science Canada. Operation is sub
ect to the followin
two conditions:
1
this device may not cause interference, and 2
this device must accept any interference, includin
interference that
may cause undesired operation of the device Limited Product Warranty.
English
Français Español English
roduct Warrant
Labtec Hardware Product Limited Warranty. Labtec warrants that your Labtec hardware product shall be free from defects in
material and workmanship for two (2) years, beginning from the date of purchase. Except where prohibited by applicable law, this
warranty is nontransferable and is limited to the original purchaser. This warranty gives you specific legal rights, and you may also
have other rights that vary under local laws
Remedies. Labtec’s entire liability and your exclusive remedy
or any breach o
warranty shall be, at Labtec’s option,
1
to repai
or replace the hardware, or
2
to refund the price paid, provided that the hardware is returned to the point of purchase, or such
other place as Labtec may direct, with a copy of the sales receipt or dated itemized receipt.
hippin
and handlin
char
es ma
apply except where prohibited by applicable law. Labtec may, at its option, use new or refurbished or used parts in good working
condition to re
air or re
lace an
hardware
roduct. An
re
lacement hardware
roduct will be warranted for the remainder o
the original warranty period, or thirty (30) days, whichever is longer or for any additional period of time that may be applicable in
your jurisdiction
Limits o
Warranty. This warranty does not cover problems or dama
e resultin
rom
1
accident, abuse, misapplication, or an
unauthorized repair, modification or disassembly;
2
improper operation or maintenance, usa
e not in accordance with produc
instructions or connection to improper volta
e supply; or
3
use of consumables, such as replacement batteries, not supplied b
a
tec except w
ere suc
restr
ct
on
s pro
te
y app
ca
e
aw.
How to Obtain Warranty Support. Before submitting a warranty claim, we recommend you visit the support section a
www.labtec.com
or technical assistance. Valid warranty claims are
enerally processed throu
h the point o
purchase durin
the
irst thirty
30
days a
ter purchase; however, this period o
time may vary dependin
on where you purchased your product.
Please check with Labtec or the retailer where
ou
urchased
our
roduct
or details. Warrant
claims that cannot be
rocessed
throu
h the point of purchase and any other product related questions should be addressed directly to Labtec. The addresses and
customer service contact information for Labtec can be found in the documentation accompanyin
your product and on the web at
www.labtec.com
contactus.
Limitation of Liability. Labtec shall not be liable for any special, indirect, incidental, or consequential damages whatsoever,
includin
but not limited to loss o
pro
its, revenue or data
whether direct or indirect
or commercial loss
or breach o
any express
or implied warranty on your product even if Labtec has been advised of the possibility of such dama
es. Some
urisdictions do no
allow the exclusion or limitation o
special, indirect, incidental, or consequential dama
es, so the above limitation or exclusion may
not app
y to you.
Duration of Im
lied Warranties. Exce
t to the extent
rohibited b
a
licable law, an
im
lied warrant
or condition of
merchantabilit
or fitness for a
articular
ur
ose on this hardware
roduct is limited in duration to the duration of the a
licable
limited warranty period for your product. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the
above limitation ma
not a
l
to
ou.
National
tatutory Ri
hts.
onsumers have le
al ri
hts under applicable national le
islation
overnin
the sale of consumer
oods.
uch ri
hts are not affected by the warranties in this Limited Warranty
No Other Warranties. No Labtec dealer, agent, or employee is authorized to make any modification, extension, or addition to
this warrant
Labtec Address. Labtec
Inc.
6505 Kaiser Drive
Fremont
California 94555
U.S.A
n
t
ll
ti
n
m
ri
Branchez sim
lement le câble USB dans un
ort USB libre
our commencer à utiliser la souris
Informations im
ortantes relatives au confort
Des tâches répétitives effectuées pendant de lon
ues périodes et un espace de travail mal a
encé risquent de provoquer un
certa in inconfort, voire des blessures au niveau des nerfs, des tendons et des muscles. Si vous ressentez des douleurs,
en
ourdissements, faiblesses,
onflements, brûlures, crampes ou raideurs à ces endroits, consultez un médecin
ntr
ti
n
l
ri
• Nettoyez l’ext
rieur de la souris avec un chiffon doux humid
.
• Les déter
ents corrosifs sont à proscrir
.
• Avant l’utilisation de tout produit de nettoya
e, faites un essai sous le dispositi
.
épannage
• Essa
ez un autre
ort USB sur l’ordinateur
Désactiver la lumière
Si vous souhaitez désactiver l’illumination de la souris
veuillez utiliser le bouton “marche/arrêt” situé sous la souris
ormes internationales et sécurité
et a
areil o
ti
ue est com
atible avec les
roduits LED de Classe 1 de la norme internationale IEC 825-1: 1993.
ATTENTION: l’utilisation de commandes et r
glages ou l’emploi de proc
dures autres que celles sp
cifi
es dans le cadre du
résent document ris
ue de
rovo
uer une ex
osition à des radiations. Cette souris o
ti
ue ne nécessite aucun entretien. La
uissance de la lumière visible
ar l’utilisateur est de 15 microwatts en mode de fonctionnement normal. Ce dis
ositif est un
roduit commercial dont la tem
érature de fonctionnement est com
rise entre 0° C et 40° C
rvi
li
nt
l
v
v
i
’
i
t
n
v
tr
roduit
nt
t
t
702
-
vi
it
l
r
it
l’
r
iv
nt
: www.l
t
.
m
D
l
r
ti
n F
Ce dispositif a été testé et déclaré conforme à la section 15 du rè
lement de la FCC. L’utilisation de la caméra es
soumise aux deux conditions suivantes: 1
le dispositif concerné ne doit pas causer d’interférences dan
ereuses et 2
il
doit accepter toute interférence reçue, y compris les interférences risquant d’engendrer un fonctionnement indésirable.
Cet équipement a été testé et déclaré conforme aux limitations prévues dans le cadre de la caté
orie B des appareils
umériques selon la définition de la section 15 du règlement de la FCC. Ces limitations ont été conçues pour fournir une
rotection raisonnable contre tout brouillage nuisible au sein d’une installation r
sidentielle. Cet
quipement g
n
re,
tilise et diffuse des ondes radio et, s’il n’est pas install
ni utilis
en conformit
avec les instructions dont il fait l’objet,
eut causer des interférences
ênantes avec les communications radio. Nous ne saurions toutefois
arantir l’absence
d’interférences dans une installation particulière. Si cet équipement produit des interférences
raves lors de réceptions
adio ou télévisées, ce qui peut être détecté en allumant et en étei
nant l’équipement, vous êtes invité à les supprimer de
lusieurs manières: 1
réorienter ou déplacer l’antenne de réception; 2
au
menter la distance séparant l’équipement e
e récepteur; 3
connecter l’équipement à un circuit différent de celui auquel le récepteur est connecté; 4
contacter votre
evendeur ou un technicien radio/TV qualifié. Toutes modifications ou tous chan
ements effectués sans l’accord exprès
de la partie responsable de la compatibilit
pourraient annuler le droit de l’utilisateur
utiliser son
quipement. Si des
c
bles d’interface blind
s ont
t
fournis avec le
roduit ou si des com
osants ou des accessoires com
l
mentaires sont
ecommand
s, ils doivent
tre utilis
s lors de l’installation du produit afin d’assurer la conformit
avec le r
glement FCC
D
claration
our les documents canadien
Cet a
areil numéri
ue est conforme aux limitations concernant l’émission d’interférences radio
ar des a
areils
umériques de caté
orie B, telles que stipulées dans le cadre de la norme Appareils numériques ICES-003 édictée par le
ministère des Communications. Ce dispositif est conforme à la norme RSS-210 du partenariat Industrie et Sciences
Canada. L’utilisation de l’appareil est soumise aux deux conditions suivantes: 1) le dispositif concerné ne doit pas cause
d’interf
rences et 2) il doit accepter toute interf
rence re
ue, y compris les interf
rences risquant d’engendrer un
n
ti
nn
m
nt in
ir
l
.
mini optical glow mouse
™
DIE LINES
SPOT COLORS
PROCESS COLORS
COLOR SPECIFICATIONS
BRAND / LAUNCH: Labtec 2007 PROJECT TITLE: Mini Optical Glow Mouse (Lucia) DETAILS: AMR / QSG
K 5 25 50 75 95
SPECIFICATIONS / NOTES: Final files to print.
R/C: removed UL information.
MODIFICATION DATE: February 27, 2007
THIS PRINT SIZE / SCALE: 100% of original
Designer: Erika Wong/CC
Location: Vancouver, WA
DIE LINE
COLOR
(NO PRINT)
Praat mee over dit product
Laat hier weten wat jij vindt van de Labtec Mini Optical Glow Muis. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.