Handleiding Lorus W100 Uurwerk

Handleiding

INSTRUCTION MANUAL

CAL. W100 (RBM SERIES)

NREW100

01-99

■ CHARACTERISTICS

1. Time/calendar display: Hour, minutes,

seconds, month, date and day of the week.

• Fully automatic calendar: Calendar adjusts

automatically for odd and even months including

February of leap years from the year 1998 to

the end of 2048.

• Time indication: Changeover between

12- and 24-hour indications is possible.

2. Stopwatch: Measures up to10 hours with 1/

100 second readout.

• Lap time measurement: When the fastest

lap time is measured, a beep sounds and the

display is illuminated.

• Auto start function: The stopwatch can be

set to start automatically at a desired time .

3. Countdown timer:

• Preset timer: Five different lengths of time

(3, 10, 15, 30 and 45 minutes) have been

preset for the timer.

• Adjustable timer: Up to 23 hours and 59

minutes can be set in minute increments.

4. Daily alarm: The alarm can be set to ring on

a 24-hour basis.

• Hourly time signal: Can be set to ring

every hour on the hour.

5. Dual time: Time of a different time zone can

be set and displayed.

6. Illuminating light: The light illuminates

the display in the dark.

1. Press button “A” to show the time/calendar

display.

2. Press button “A” for 2 seconds to show the

time/calendar setting display. The second

digits start flashing.

3. Selection of the digits to be adjusted (flashing)

is made in the following order by pressing

button “B”.

Date Month

4. Press button “C” to set the flashing digits.

One digit is advanced with each press of

button “C”. Digits except seconds and 12-

/24-hour indication move quickly by keeping

button “C” pressed.

5. After all the adjustments are completed,

press button “A” to return to the time/

calendar display.

Notes:

1. When setting the hour digits in the 12-

hour indication, check that AM/PM is properly

set. In the 24-hour indication, there is no

indication.

2. Once the year, month and date have been

set, the day of the week is set automatically.

3. If the watch is left untouched in the time/

calendar setting display with the digits

flashing, it will automatically return to the

time/calendar display in 2 minutes.

Seconds setting

When the seconds digits are flashing, press

button “C” in accordance with a time signal.

The seconds are reset to “00” and start immediately.

When the seconds count any number from

“30” to “59” and button “C” is pressed, one

minute is added and the seconds are immediately

reset to “00”.

Year

Hour

Minutes

Seconds

12-/24-hour

indication

→

→→

→

→

→

→

■ HOW TO USE THE STOPWATCH

• The stopwatch can measure up to 10 hours

in 1/100 seconds.

* Even if the stopwatch display is changed to

another while the measurement is in prog-

ress, it continues counting properly. After

the stopwatch is used, however, be sure to

reset it as the battery energy is consumed

enormously to shorten the battery life.

B

C

A

Minutes Seconds 1/100 seconds

Stopwatch

display mark

Stopwatch Operation

Press button “A” to show the stopwatch display.

■ BUTTONS AND DISPLAYS

MODE

START

LAP

LIGHT

AM/PM

mark

Hour Minutes

Light

button

Alarm

mark

Hourly time

signal mark

Day

Seconds

A

B

Month

Date

The selection of the display can be made in the

following order with each press of button “A”.

Timer

display

A

A

Stopwatch

display

Alarm

display

Time/calendar

display

A

A

With each press of button “B” in the time/calen-

dar display, the display changes over between

the time/calendar and dual time alternately.

Time/calendar

display

Dual time

display

B

I

NSTRUCTION

M

ANUAL

CAL. W100 (RBM SERIES)

NREW100

01-99

Month

Hour Minutes Seconds

B

C

Day Date

AM/PM

mark

A

■

HOW TO SET THE TIME/CALENDAR

Start Stop

Restart

Stop

Accumulated elapsed time measurement

BB BB

C

Reset

Accumulate repeatedly by

pressing button “B”.

Lap time measurement

Start

B

• “Lap time” refers to an elapsed time required

to cover a given section of the whole distance.

Lap 1

C

C

Stop

Reset

BC

Note: When a lap time measured is the fastest

among the lap times previously measured,

a beep rings and the display is illuminated.

** Can repeat by pressing button “C”.

Lap 2

**

C

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Lorus W100 Uurwerk. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Lorus. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Lorus W100 Uurwerk in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Lorus Uurwerken
Meer handleidingen voor Uurwerken

Veelgestelde vragen over Lorus W100 Uurwerk

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Lorus YK36 Uurwerk

Handleiding

Lorus W136 Uurwerk

Handleiding

Lorus VJ21 Uurwerk

Handleiding

Lorus YK30 Uurwerk

Handleiding

Lorus VJ33 Uurwerk

Handleiding

Lorus W190 Uurwerk

Handleiding

Lorus Y704B Uurwerk

Handleiding

Lorus VX3K Uurwerk

Gerelateerde categorieën