Handleiding Lorus Z018 Uurwerk

Handleiding

■

CHARACTERISTICS

1. Time/calendar display: Hour, Minute, Second,

Month, Date and day of the week.

2. Time Indication: 12-hour display format with

PM indicator and 24-hour display format are

available.

3. Daily alarm: The alarm can be set to sound

at the designated time on a 24-hour basis.

4. Chime: The chime can be set to sound every

hour on the hour with a single beep.

5. Stopwatch: The stopwatch can measure

up to 23 hours 59 minutes and 59 seconds

in 1/100-second increments. Lap time

measurement is available.

■

HOW TO SET THE TIME/CALENDAR

■

HOW TO SET ALARM TIME

1. From NORMAL TIME display, press and hold S3

for 3 seconds to show the ALARM TIME display.

2. Press S3 again to move on to SECONDS setting.

The second digits start flashing.

3. Press S2

in accordance with a time signal. The

second digits are reset to

“00”

and start

counting immediately.

* When the second digits count any number from

“30” to “59” and S2 is pressed, one minutes is

added. If second digits count any number from

“00” to “29”, minutes will not be changed.

* Selection of the digits to be adjusted (flashing)

is made in the order below by pressing S1 and

then pressing S2 to be set.

* While advancing, hold S2 can fasten the process.

NREZ018

3-2012

CAL. Z018 (R23 SERIES)

1. From NORMAL TIME display, press and hold S3

for 3 seconds to show the ALARM TIME display.

The hour digits start flashing.

2. Press S2 to set HOURS setting.

3. Press S1 to move on to MINUTES setting.

4. Press S2 to set MINUTES setting.

5. After all the setting are completed, press S3 to

return to the NORMAL TIME display.

* Selection of the digits to be adjusted (flashing)

is made by pressing S1 and then pressing S2 to

be set.

* While advancing, hold S2 can fasten the process.

■

HOW TO SWITCH 12-HOUR/24-HOUR

FORMAT

Engagement/Disengagement of ALARM &

CHIME

* Press S2 and hold it, and then press S1, the ALARM

and CHIME can be engaged or disengaged in

the order below.

* The ALARM signal and/or CHIME signal appear

or disappear on the display accordingly.

* The ALARM sounds for 20 seconds at the

designated time. Press S2 to stop the alarm

after it starts sound.

Press S2 or S1 and hold it. Then press S3 to

switch the display.

* The time display format in either 12-hour

indication or in 24-hour indication can be

selected alternately.

* Under the 12-hour indication format, "PM" mark

appears in the afternoon, but no AM mark

appears in the morning. Under the 24-hour

indication format, no mark appears on the

display.

■

BUTTONS AND DISPLAYS

HOURS

DAY OF WEEK

CHIME

SIGNAL

MINUTES

SECONDS

ALARM

SIGNAL

S1

S2

S3

AFTER

NOON

4. After all the adjustment are completed, press

S3 to return to the NORMAL TIME display.

* Press S3 at any time to return to NORMAL TIME

DISPLAY.

■

HOW TO SWICH MONTH/DATE DISPLAY

1. From NORMAL TIME display, press S1 and hold

it to show the MONTH/DATE display.

2. Press S2 to switch to the DATE/MONTH display.

3. Press S2 again to switch back to the MONTH/

DATE display.

* The display format in either MONTH/DATE

indication or in DATE/MONTH indication can

be selected alternately by pressing S2.

The display in other modes

* Press S2 and hold it to show the ALARM TIME,

release to return to NORMAL TIME display.

* Press S1 and hold it to show the MONTH/DATE,

or DATE/MONTH, release to return to NORMAL

TIME display.

PRESS S2

AND HOLD

NORMAL TIME

ALARM TIME

RELEASE

NORMAL

TIME

NORMAL TIME

MONTH/DATE

RELEASE

NORMAL

TIME

PRESS S1

AND HOLD

NORMAL TIME

MONTH/DATE

PRESS S2

DATE/MONTH

NORMAL TIME

ALARM TIME

3 SECONDS

LATER

PRESS S3

NORMAL TIME

PRESS S2

AND HOLD

ALARM TIME

CHIME

SIGNAL

ALARM

SIGNAL

ALARM &

CHIME ON

CHIME OFF

ALARM & CHIME

OFF

CHIME

OFF

CHIME ON

12 HOUR

24 HOUR

AFTER

NOON

PRESS S1 OR

S2 AND HOLD

THEN PRESS S3

PRESS S2

SECONDS

SETTING

PRESS S3

NORMAL TIME

PRESS S3

AND HOLD

3 SECONDS

ALARM TIME

3 SECONDS

LATER

PRESS S1

AND HOLD

PRESS S3

PRESS S1

PRESS S2

MINUTES

SETTING

PRESS S1

PRESS S2

HOURS

SETTING

PRESS S1

PRESS S2

MONTH

SETTING

PRESS S1

PRESS S2

DATE

SETTING

PRESS S1

PRESS S2

DAY OF WEEK

SETTING

PRESS S2

PRESS S3

AND HOLD

PRESS S1

PRESS S2

MINUTES SETTING

PRESS S2

HOURS

SETTING

PRESS S1

PRESS S2

AND HOLD

THEN PRESS S1

ALARM OFF

PRESS S2

AND HOLD

THEN PRESS S1

CHIME ON

PRESS S2 AND HOLD

THEN PRESS S1

ALARM & CHIME ON

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Lorus Z018 Uurwerk. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Lorus. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Lorus Z018 Uurwerk in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Lorus Uurwerken
Meer handleidingen voor Uurwerken

Veelgestelde vragen over Lorus Z018 Uurwerk

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.