Handleiding Makita LS1219 Verstekzaag

Handleiding

3 ENGLISH

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

Read instruction manual.

DOUBLE INSULATION

To avoid injury from ying debris, keep hold-

ing the saw head down, after making cuts,

until the blade has come to a complete stop.

1

2

3

When performing bevel cut, rst turn the

knob counterclockwise and then tilt the

carriage. After that, turn the knob clockwise

to tighten.

When performing slide cut, rst pull car-

riage fully and press down handle, then

push carriage toward the guide fence.

Hold down the releasing button when tilting

the carriage to the right.

Engage the stopper lever when cutting a

base board in 45° miter angle.

Do not place hand or ngers close to the

blade.

Never look into the laser beam. Direct laser

beam may injure your eyes.

Do not install the horizontal vise to the

same direction as the miter cutting. (This

symbol is applied on the horizontal vise)

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for accurate straight and miter

cutting in wood. With appropriate saw blades, aluminum

can also be sawed.

Power supply

The tool should be connected only to a power supply of the same

voltage as indicated on the nameplate, and can only be operated

on single-phase AC supply. They are double-insulated and can,

therefore, also be used from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-3-9:

Model LS1219

Sound pressure level (L

pA

) : 91 dB(A)

Sound power level (L

WA

) : 100 dB (A)

Uncertainty (K) : 3 dB(A)

Model LS1219L

Sound pressure level (L

pA

) : 91 dB(A)

Sound power level (L

WA

) : 100 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-3-9:

Model LS1219

Vibration emission (a

h

) : 2.5 m/s

2

or less

Uncertainty (K) : 1.5 m/s

2

Model LS1219L

Vibration emission (a

h

) : 2.5 m/s

2

or less

Uncertainty (K) : 1.5 m/s

2

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Makita LS1219 Verstekzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Makita. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Makita LS1219 Verstekzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Makita Verstekzagen
Meer handleidingen voor Verstekzagen

Veelgestelde vragen over Makita LS1219 Verstekzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Makita LS1019 Verstekzaag

Handleiding

Makita LS0816F Verstekzaag

Handleiding

Makita LS1017L Verstekzaag

Handleiding

Makita LS1045 Verstekzaag

Handleiding

Makita MLS100 Verstekzaag

Handleiding

Makita LS1219L Verstekzaag

Handleiding

Makita LS1020 Verstekzaag

Handleiding

Makita LS1030N Verstekzaag

Gerelateerde categorieën