Handleiding Nitecore EC25 Zaklamp

Handleiding

User Manual

Features

· Utilizes a CREE XM-L2 T6 LED

· Maximum output of up to 960 lumens

· Radiator fins integrated into the head design provide better cooling for

exceptional overall performance

· Integrated “Precision Digital Optics Technology” provides extreme

reflector performance

· Boasts a peak beam intensity of 23,000cd and a throw distance of up

to 300 meters

· Innovative single button two-stage switch offers a user-friendly

interface (patented)

· Eight rapidly switchable brightness modes to select from

· High efficiency circuit board provides up to 25 hours runtime

· Integrated power indicator light displays remaining battery power

(patented)

· Power indicator’s secondary function displays battery voltage (accurate

to 0.1V)

· Reverse polarity protection prevents damage due to incorrectly

inserted batteries

· Stainless steel titanium-plated two-way clip

· Toughened ultra-clear mineral glass with anti-reflective coating

· Constructed from aero grade aluminum alloy

· Sturdy HAIII military grade hard-anodized

· Waterproof in accordance with IPX-8 (two meters submersible)

· Impact resistant to 1.5 meters

· Tail stand capability

Dimensions

Length: 128mm (5”)

Head diameter: 34mm (1.34”)

Tube diameter: 25.4mm (1”)

Weight: 122g (4.3oz)(without battery)

Accessories

Quality holster, removable clip, lanyard, spare O-ring

Battery Options

Battery installation

1. Unscrew the tail cap in a counter-clockwise direction.

2. Insert one 18650 battery or two CR123 batteries with the positive pole

pointing forward (toward the light head).

Thanks for purchasing NITECORE!

Output & Runtime

NOTICE

Stated data has been measured according to the international flashlight testing

standards ANSI/NEMA FL1 using a quality Nitecore 18650 (3.7V 2600mAh)

battery or two Nitecore CR123 (3V 1700mAh) batteries under laboratory

conditions. The data may vary due to individual usage habits and environmental

conditions.

Changing

When the power indicator blinks rapidly it means the batteries need

to be replaced. Alternatively if the light becomes dim or

unresponsive to adjustment, this also indicates batteries need to be

replaced.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed

by a thin coating of silicon-based lubricant.

Warranty Service

All NITECORE

®

products are warranted for quality. DOA / defective

products can be exchanged for replacement through a local

distributor/dealer within the 15 days of purchase. After 15 days, all

defective / malfunctioning NITECORE

®

products will be repaired

free of charge for a period of 60 months from the date of purchase.

After 60 months, a limited warranty applies, covering the cost of

labor and maintenance, but not the cost of accessories or

replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified

by unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE

®

products and services,

please contact your national NITECORE

®

distributor or send an

email to [email protected]

®

The All-Round Flashlight Expert

TURBO HIGH MID LOW

LUMENS

600

LUMENS

960

LUMENS

300

LUMENS

145

1

h30min

1

h45min

17

h30min

4

h15min

1

h30min

10

h30min

9

h

4

h

LOWER

LUMENS

65

25

h

2

h

300m

(Beam Distance)

23000cd (Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m (Impact Resistant)

2×CR123

1×18650

NITECORE (SYSMAX) is a member of PLATO, participating in and helping

to develop the ANSI FL1 standard of measurement. Product testing data

is in accordance with these internationally recognized scientific

standards.

Note: After loading the batteries, the power indicator light will blink to

indicate the battery voltage. Please refer to the “Power Tips”

section of this manual for details.

WARNING

Ensure batteries are inserted with the positive (+) end pointing to the

head. The EC25 will not operate with incorrect installation.

General Operation

The EC25 utilizes a 2-stage switch similar to a camera shutter button.

The light’s numerous functions are selected according to the depth the

switch is pressed. The EC25 has two modes: Daily mode and Search /

Turbo mode.

Operating In Daily Mode

1. With the light turned off, press the switch partway down and release

within a second to enter daily mode.

2. Daily mode contains four brightness levels: ultra-low, low, medium, and

high. Pressing the switch partway down in quick succession will cycle

through these modes. Pressing the switch partway down and holding

for more than one second when in daily mode will enter into turbo

mode. See Turbo / Search mode instructions below.

3. The light is turned off (put into standby mode) by pressing the button

all the way down and releasing within a second. This will also

memorize the last daily mode used.

4. Daily mode has a momentary function which allows the light to be

turned on only when the switch is held. With the light turned off, press

the switch partway down and hold to activate daily mode’s momentary

function. The light will turn off the moment the switch is released.

Operating in Search / Turbo Mode

1. With the light turned off, press the switch all the way down and release

within one second to enter turbo mode. To cycle between high and

turbo modes press the button partway down while in turbo mode.

2. To turn the light off when in turbo mode, once again press the button all

the way down and release within one second.

3. Turbo / search mode has a momentary function which allows the light

to be turned on only when the switch is held. Pressing the switch all

the way down and holding will activate Turbo / Search mode’s

momentary function. The light will turn off the moment the switch is

released.

NB: For user safety and to prevent overheating / failure, the EC25 will

automatically switch to high mode after three minutes of use in Turbo

mode. Half press and hold the switch to re-activate Turbo.

Standby Mode / Lockout and Unlock

functions

With the light turned on, press the switch all the way down and release

within one second to enter into standby mode. In this mode, the light will

consume small amounts of power to maintain the settings in the MCU

(micro control unit) but appear to be turned off. When in standby mode

the power indicator light will flash once every three seconds to show the

location of the light.

With the light turned on, press the switch all the way down and hold for

more than one second. The light will turn off and enter into lockout mode.

Lockout mode consumes almost no battery power and prevents the light

from accidentally being turned on. Holding the switch for more than one

second to exit the lockout mode.

NB: When entering lockout mode, the power indicator will flash to

indicate specific battery voltage. Please refer to the “Power Tips” section

of this manual for details.

Special Strobe / SOS mode and

Location Beacon

With the light turned on, press the switch all the way down twice in quick

succession to enter strobe mode. When in strobe mode, press the switch

all the way down and hold for more than one second to cycle through

strobe, SOS and location beacon modes. To select any of these modes

simply release the switch when it is displayed. To turn off the light fully

press and release the switch.

Power Tips

1. When the light is on, the power indicator will blink once every two

seconds when power levels reach 50%.

2. When the light is on, the power indicator will blink consistently when

power levels are low.

3. Each time batteries are inserted or the light is put into lockout mode,

the power indicator light will blink in various patterns to indicate the

battery voltage (accurate to ±0.1V). For example, when the battery

voltage is at a maximum charge of 4.2V, the power indicator will blink 4

times in quick succession, followed by a one second pause and two

more blinks, indicating a total battery voltage of 4.2V.

EC25

SIZE

Nominal voltage

Compatible

Primary Lithium battery

CR123 3V

Y (Recommended)

18650 Rechargeable Li-ion battery

18650 3.7V

Y (Recommended)

Rechargeable Li-ion battery

RCR123 3.7V

Y

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore EC25 Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore EC25 Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Nitecore EC25 Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Nitecore MH12S Zaklamp

Handleiding

Nitecore TIP2 Zaklamp

Handleiding

Nitecore EDC27 Zaklamp

Handleiding

Nitecore EDC33 Zaklamp

Handleiding

Nitecore NU33 Zaklamp

Handleiding

Nitecore TIKI GITD BLUE Zaklamp

Handleiding

Nitecore MH25 V2 Zaklamp

Handleiding

Nitecore NU40 Zaklamp

Gerelateerde categorieën