Handleiding Nitecore EC4SW Zaklamp

Handleiding

®

The All-Round Flashlight Expert

User Manual

EC4SW

Features

·Solid lightweight aero grade aluminum alloy construction

·Utilizes a CREE MT-G2 LED

·Maximum output up to 2000 lumens

·Dual switch design offers unprecedented ease of use

·Thumbscrew lock on tailcap doubles as a tripod receiver

·5 brightness levels and 3 special modes available

·High efficiency constant current circuit enables maximum runtime up to 325 hours

·Features advanced temperature regulation (ATR) technology

·A power indicator built into the on/off switch indicates remaining battery power (Chinese

patent:ZL201220057767.4)

·Direct access to ultralow and turbo outputs

·A micro-textured reflector offers wide angle lighting

·Reverse polarity protection prevents damage arise from incorrectly inserted batteries

·Stainless steel retaining ring protects core components from damage

·Toughened ultra-clear mineral glass with anti-reflective coating

·Waterproof in accordance with IPX-8 (2 meters submersible)

·Impact resistant to 1.5 meters

·Tail stand capability

Dimensions

Length: 5.90” (150mm)

Head diameter: 1.57” (40mm)

Tube: 1.54” × 1.10” (39mm×28mm)

Weight: 6.03oz (171gram) (without battery)

Brightness Levels

With the light turned on, press the mode switch repeatedly to cycle through brightness levels of

ultralow, low, medium, high and turbo. This mode has memory effect that ensures direct access to

the brightness level last used.

Direct Access to Ultralow/Turbo

With the light turned off, press and hold the on/off switch for over one second to enter ultralow

level (2 lumens).

With the light turned off, press and hold the mode switch for over one second to enter turbo

level (2000 lumens).

Special Modes (Strobe/Location Beacon/SOS)

With the light turned on, press and hold the mode switch for over one second to enter strobe

mode. To cycle through location beacon/SOS/strobe modes, press and hold the mode switch for

over one second again. To exit, press the on/off switch to turn the light off.

Strobe Ready

With the light turned off, press the mode switch twice in quick succession to enter strobe mode

directly. To exit, simply press any switch to turn the light off.

Lockout/Unlock

With the light turned on, press and hold both switches for over one second to switch the light off

and enter lockout mode. In this mode, the two switches will not have their respective functions,

thus preventing accidental activation. To unlock, press and hold both switches for over one second

again.

NOTE:

1. When in lockout mode, the EC4SW will remain operational using 2x18650 batteries for over 12

months.

2. When the EC4SW is kept in a backpack or left unused for extended periods, Nitecore

recommends batteries are removed to cut off power entirely and thus prevent battery leakage or

accidental activation.

Power Tips

After battery installation or with the mode switch being pressed when the light is off, the blue

power indicator built into the switch will blink to indicate remaining battery power. The power

indicator will blink three times when power levels are above 50%; twice when power levels are

below 50%; and once when battery is close to depletion.

ATR Technology

Advanced temperature regulation (ATR) technology allows the EC4SW to dynamically adjust

output performance according to its internal temperature. This prevents damage from overheating

and prolongs its working life.

Changing / Charging Battery

Batteries should be replaced or recharged when output appears to be dim or the flashlight

becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of

silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning NITECORE®

product can be repaired free of charge for a period of 60 months (5 years) from the date of

purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and

maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact a local

NITECORE® distributor or send an email to [email protected]

※All images, text and statements specified herein this user manual are for reference purpose only.

Should any discrepancy occurs between this manual and information specified on

www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.

reserves the rights to interpret and amend the content of this document at any time without prior

notice.

Output & Runtime

NOTICE:

The stated data has been

measured in accordance

with the international

flashlight testing standards

ANSI/NEMA FL1, using 2

x Nitecore 18650 Li-ion

batteries (3.7V, 2600mAh)

or 4 x Nitecore CR123

batteries (3V, 1700mAh)

under laboratory

conditions. The data may

vary in real-world use due

to different battery usage

or environmental

conditions.

Operating Instructions

Battery Installation

As illustrated, rotate the thumbscrew lock counterclockwise and screw the tail cap off. Insert

batteries with the negative (-) ends contacting the springs, and then tighten the thumbscrew lock

clockwise.

Accessories

Quality holster, lanyard

Battery Options

Thanks for purchasing NITECORE!

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: [email protected]

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

NOTE: After battery insertion, the

power indicator light will blink to

indicate remaining battery power.

Please refer to the “Power Tips”

section of this manual for details.

WARNING:

1. Do not mix rechargeable and

non-rechargeable batteries.

2. Do not mix batteries of different

types/brands.

20151116

TYPE

Nominal voltage

Compatible

Primary Lithium battery

CR123 3V

Y (Recommended)

18650 Rechargeable Li-ion battery

18650 3.7V

Y (Recommended)

Rechargeable Li-ion battery

RCR123 3.7V

Y

TURBO HIGH MID LOW

LUMENS

1010

LUMENS

2000

LUMENS

400

LUMENS

85

2

h15min

45

min

30

h45min

6

h15min

2

h

30

min

23

h15min

5

h45min

ULTRALOW

LUMENS

2

325

h

210

h

238m

(Beam Distance)

14,200cd

(Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m

(Impact Resistant)

4×CR1232 ×18650

On/Off Operation

To switch on: Press the on/off switch to turn the light on

To switch off: Press the on/off switch again to turn the light off and enter standby mode

Standby Mode

With the light turned on, press and hold the on/off switch for over one second to turn the light off and

activate the power indicator to blink once every three seconds, thus helping users locate the EC4SW in

dark environments. When powered by 2x18650 batteries, the EC4SW can operate for over 6 months

with the power indicator on, or remain on standby for over 12 months with the power indicator off.

Thumbscrew lock

Please find us on facebook:

NITECORE Flashlights

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore EC4SW Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore EC4SW Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Nitecore EC4SW Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.