Handleiding Nitecore MT10C Zaklamp

Handleiding

®

User Manual

Features

• Utilizes a CREE XM-L2 U2 LED

• Maximum output up to 920 lumens

• Integrated metal micro textured reflector for optimal peripheral illumination

• Boasts a peak beam intensity of 9,000 cd and a throw distance of up to 190 meters

• Tail switch designed for tactical applications

• Side switches for brightness levels and modes adjustment

• Features intelligent memory effect

• Red LED provides constant/flashing illumination

• Displays battery voltage with red light (accurate to 0.1V)

• High efficiency constant current circuit enables maximum runtime of 170 hours

• Direct access to turbo/red light mode

• Reverse polarity protection prevents damage from incorrectly inserted batteries

• Stainless steel titanium-plated two-way clip

• Toughened ultra-clear mineral glass with anti-reflective coating

• Robust HAIII military grade hard-anodized

• Waterproof in accordance with IPX-8 (two-meter submersible)

• Tail stand capability

Dimensions

Length: 3.59” (91.2mm)

Head Diameter: 1” (25.4mm)

Tail Diameter: 1” (25.4mm)

Weight: 2.01oz (57g)(without battery)

Thanks for purchasing NITECORE!

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: [email protected]

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Battery Options

The All-Round Flashlight Expert

Brightness Levels

When the MT10C is switched on, press the step-up switch repeatedly to switch from the

following brightness levels: red beacon-red light-ultralow-low-medium-high-turbo. The MT10C

has memory effect. When it is switched on, the MT10C will enter the brightness level last

used.

When the MT10C is switched on, press the step-down switch repeatedly to lower its

brightness until red beacon mode, after which there is no cycling back to other brightness

levels.

Direct Access to Red Light Mode:

When the MT10C is switched on, press and hold the step-down switch for over one

second to access the red light mode; OR:

When the MT10C is switched off, press and hold the step-down switch and press the

button on the tailcap to access the red light mode.

Direct Access to Turbo:

When the MT10C is switched on, press and hold the step-up switch for over one second to

access turbo output (920 lumens); OR:

When the MT10C is switched off, press and hold the step-up switch and press the button

on the tailcap to access turbo output (920 lumens).

Note: After three minutes' using of turbo mode, the flashlight will lower its output automatically

to prevent overheating, and efficiently ensure the battery runtime.

Special modes (Strobe/Location/SOS)

With the light switched on, press both side switches to enter strobe mode. When in

strobe mode, press both side switches again to cycle through Location Beacon, SOS,

and Strobe modes. To exit and resume the brightness level last used, simply press the

step-up or step-down switch. The MT10C has memory effect in strobe mode. If it is

turned off in strobe mode, it will enter strobe mode immediately when switched on again.

Power Tips

With the light switched off, press both side switches and the button on the tailcap to

activate the red power indicator to blink and indicate battery voltage (accurate to 0.1V). For

example, when battery voltage is at 4.2V, the red power indicator will blink 4 times, followed

by a one second pause and another 2 blinks. Different voltages represent the corresponding

remaining battery power levels.

Accessories

Holster, clip, lanyard, spare tailcap cover,

spare O-ring

Brightness & Runtime

NOTICE

The stated data has been measured in accordance with the international flashlight testing

standards ANSI/NEMA FL1, using one high quality IMR18350 Li-ion battery (3.7V, 700mAh) or

one high quality CR123 battery (3V, 1700mAh) under laboratory conditions.

Operating Instructions

Battery Installation

Insert one CR123 or IMR18350 battery as illustrated.

WARNING

1. Ensure batteries are inserted with the positive (+) end

pointing towards the head. The MT10C will not be

operational with incorrectly inserted battery.

2. Please stop using and remove a depleted IMR18350

battery to avoid potential battery damage.

Momentary Illumination

Momentary illumination can be achieved by switching the

MT10C

IMR 18350

TYPE

Nominal voltage

Compatible

Primary Lithium battery

CR123 3V

Y (Recommended)

IMR18350 Rechargeable Li-ion battery

IMR18350 3.7V

Y

Rechargeable Li-ion battery

RCR123 3.7V

Y

TURBO HIGH MID

LUMENS

500

LUMENS

920

LUMENS

180

30

min

1

h

45

min

45

min

LUMENS

280

LUMENS

480

LUMENS

135

45

min

1

h

30

min

LOW

LUMENS

70

LUMENS

50

LOWER

LUMEN

1

120

h

5

h

8

h

3

h

LUMEN

1

170

h

190m (Beam Distance)

9,000cd (Peak Beam Intensity)

IPX-8, 2m

(Waterproof and Submersible)

1.5m (Impact Resistant)

CR123

IMR18350

flashlight off and holding the tail switch halfway down. Releasing switch turns the light off.

On / Off Operation

To switch ON: Press the button on the tailcap all the way down until a click is heard.

To switch OFF: Press the button on the tailcap all the way down once again until a click is

heard.

Standby Mode:

When power is off, pre ss both side switches and the button on the tailcap

simultaneously to activate the red power indicator to flash and indicate battery voltage. Three

seconds after electrical voltage is reported, the MT10C enters standby mode where the

indicator flashes once every three seconds. In standby mode, the MT10C will operate for

approximately six months with the indicator on.

4.2V3.5V 3.7V 3.9V

Low Power Full Power

3.2V2.4V 2.8V 3.0V

Low Power Full Power

IMR18350:

CR123:

Changing / Charging Battery

Battery should be replaced or recharged when output appears to be dim or the flashlight

becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of

silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning

NITECORE® product can be repaired free of charge for a period of 60 months (5 years) from

the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the

cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized

parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact a local

NITECORE® distributor or send an email to [email protected]

※All images, text and statements specified herein this user manual are for reference purpose

only. Should any discrepancy occurs between this manual and information specified on

www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.

reserves the rights to interpret and amend the content of this document at any time without

prior notice.

Warning:

Rechargeable IMR Li-ion batteries are not equipped with a protective circuit.

Beware of over-discharging.

Please find us on facebook: NITECORE Flashlights

20151021

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore MT10C Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore MT10C Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Nitecore MT10C Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Nitecore MH25S Zaklamp

Handleiding

Nitecore EC4GTS Zaklamp

Handleiding

Nitecore R40 V2 Zaklamp

Handleiding

Nitecore TIKI UV Zaklamp

Handleiding

Nitecore TIKI LE Zaklamp

Handleiding

Nitecore NE02 Zaklamp

Handleiding

Nitecore TM28 Zaklamp

Handleiding

Nitecore P10iX Zaklamp

Gerelateerde categorieën