Handleiding Nitecore MT20A Zaklamp

Handleiding

®

User Manual

Features

• Utilizes a CREE XP-G2 R5 LED

• Maximum output of 360 lumens

• Integrated “Precision Digital Optics Technology” provides extreme reflector

performance

Boasts a peak beam intensity of 6,500 cd and a throw distance up to 160 meters

• Tail switch designed for tactical applications

• Side switches for selecting brightness levels or modes

• Features intelligent memory effect

• Red LED provides constant/flashing illumination

• Displays battery voltage with red light (accurate to 0.1V)

• High efficiency constant current circuit enables maximum runtime of 180 hours

• Direct access to turbo/red light mode

• Reverse polarity protection prevents damage from incorrectly inserted batteries

• Stainless steel titanium-plated two-way clip

• Toughened ultra-clear mineral glass with anti-reflective coating

• Robust HAIII military grade hard-anodized

• Waterproof in accordance with IPX-8 (two-meter submersible)

• Tail stand capability

Dimensions

Length: 6.18” (156.9mm)

Head Diameter: 1” (25.4mm)

Tail Diameter: 0.85”(21.5mm)

Weight: 2.65oz (75g)(without battery)

Thanks for purchasing NITECORE!

Battery Options

The All-Round Flashlight Expert

NOTICE:

The stated data has been measured in accordance with the international flashlight testing

standards ANSI/NEMA FL1, using two high quality AA rechargeable batteries (1.2V,

2500mAH) under laboratory conditions. The data may vary in real-world use due to different

battery usage or environmental conditions.

Brightness Levels

When the MT20A is switched on, press the step-up switch repeatedly to switch among

the following brightness levels: red beacon-red light-ultralow-low-medium-high-turbo. The

MT20A has memory effect. When it is switched on, the MT20A will enter the brightness

level last used.

When the MT20A is switched on, press the step-down switch repeatedly to level down

its brightness until it reaches red beacon mode, after which there is no cycling back to

other brightness levels.

Direct Access to Red Light Mode:

When the MT20A is switched on, press and hold the step-down switch for over one

second to access red light mode; OR:

When the MT20A is switched off, press and hold the step-down switch while the tailcap

button is being held simultaneously to access the red light mode.

Direct Access to Turbo:

When the MT20A is switched on, press and hold the step-up switch for over one

second to access turbo output (360 lumens); OR:

When the MT20A is switched off, press and hold the step-up switch and press the

button on the tailcap to access turbo output (360 lumens).

Note: After three minutes' using of turbo mode, the flashlight will lower its output

automatically for preventing overheating, and efficiently ensure the battery runtime.

Special Modes (Strobe/Location Beacon/SOS)

With the light switched on, press both side switches to enter strobe mode. When in

strobe mode, press both side switches again to cycle through Location Beacon,

SOS, and Strobe modes. To exit and resume the brightness level last used, simply press

the step-up or step-down switch . The MT20A has memory effect in strobe mode. If

it is turned off in strobe mode, it will enter strobe mode immediately when switched on

again.

Power Tips

With the light switched off, press both side switches and the button on the tailcap to

activate the red power indicator to blink and indicate battery voltage (accurate to ±0.1V).

For example, when battery voltage is at 2.4V, the red power indicator will blink 2 times,

followed by a one second pause and another 4 blinks. Different voltages represent the

corresponding remaining battery power levels.

Changing / Charging Battery

Batteries should be replaced or recharged when output appears to be dim or the flashlight

becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating

of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning

NITECORE® product can be repaired free of charge for a period of 60 months (5

years) from the date of purchase. Beyond 60 months (5 years), a limited warranty

applies, covering the cost of labor and maintenance, but not the cost of accessories

or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized

parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact a

local NITECORE® distributor or send an email to [email protected]

※All images, text and statements specified herein this user manual are for reference

purpose only. Should any discrepancy occurs between this manual and information

specified on www.nitecore.com, information on our official website shall prevail.

Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of

this document at any time without prior notice.

Accessories

Quality holster, clip, lanyard, spare tail

cap cover, spare O-ring

Brightness & Runtime

NOTICE:

Operating Instructions

Battery Installation

Insert two AA batteries as illustrated.

WARNING:

Ensure batteries are inserted with the positive

(+) end pointing towards the head. The MT20A

will not be operational with incorrectly inserted

batteries.

Momentary Illumination

Momentary illumination can be achieved by switching the flashlight off and then half

pressing and holding the tail switch. Release switch to turn the light off.

Switching ON/OFF

Switch ON: Press the button on the tailcap all the way down until a “click” is heard.

Switch OFF: Press the button on the tailcap all the way down until a “click” is heard.

Standby Mode:

When power is off, press both side switches and the button on the tailcap

simultaneously to activate the red power indicator to flash and indicate battery

voltage. Three seconds after electrical voltage is reported, the MT20A enters standby

mode where the indicator flashes once every three seconds. In standby mode, the

MT20A will operate for approximately 60 days with the indicator on.

MT20A

Type

Nominal voltage

Compatible

Primary AA battery

AA 1.5V

Y (Recommended)

Rechargeable AA battery

AA 1.2V

Y (Recommended)

Primary AA Lithium battery

L91 1.5V

Y (Recommended)

Primary LiFePO4 battery

14500 3.2V

N (Banned)

Rechargeable Li-ion battery

14500 3.7V

N (Banned)

TURBO HIGH MID LOW

LUMENS

240

LUMENS

360

LUMENS

120

LUMENS

17

2

h15min

5

h45min

1

h45min

24

h

LOWER

LUMEN

1

180

h

160m

(Beam Distance)

6500cd

(Peak Beam Intensity)

IPX-8, 2m

(Waterproof and Submersible)

1.5m

(Impact Resistant)

2.7V2.1V 2.4V 2.5V

Low Power Full Power

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: [email protected]

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Please find us on facebook: NITECORE Flashlights

20150818

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore MT20A Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore MT20A Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Nitecore MT20A Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.