Handleiding Omega OCG64XTGG Kookplaat

Handleiding

9

Electrical Connections

LOCAL AUTHORITY REQUIREMENTS

Installation is only permitted by an authorized person, and carried out according to instructions provided by

the manufacturer. Incorrect installation might cause harm and damage which the manufacturer accepts no

responsibility. The electrical connection can be found 30mm in from the rear edge and 280mm from the left

hand side (looking from the front).

INSTALLATION

This cooktop must be connected to a 220-240V 50Hz power supply. It is earthed via the cord.

Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the

appliance identification plate) must be checked for correspondence to the available mains supply voltage,

and the mains electric wiring should be capable of handling the hob’s power rating (also indicated on the

identification plate);

The power point must be connected to a suitable earth wiring, in conformity to current safety regulations.

Ensure that the power supply is within 900mm of the cooktop. The power supply cord must not touch against

any hot surfaces and must be placed so that its temperature does not exceed 75 degrees C at any point

along its length.

The colours of the wires in the hob power cable may not correspond with the colours marked on the

terminals of your electrical plug .The plug should in any case be wired as follows:

—connect the green/yellow wire to the terminal marked with the letter E or the earth symbol or coloured

green/yellow;—connect the blue wire to the terminal marked with the letter N or coloured black;

—connect the brown wire to the terminal marked with the letter L or coloured red.

After having installed the appliance, the power switch or power plug must

always be in an accessible position.

Electrical connection diagram

N.B For connections to the mains power supply, never use adapters,

reductions or multiple power points as these may overheat and catch

fire.

In the event that installation should require modifications to the mains supply wiring system or if the power

plug is not suitable for the type of power point available, it is required that a qualified technician be called to

carry out substitution.

The technician will also have to verify that the cross-section of the electric cables on the power point match

the appliance’s power rating.

INSTALLATION

Note: These tops are designed to be fitted into kitchen fixtures measuring 600 mm in depth.

In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown on the cutting size

board has to be made, keeping in consideration the following:

Within the fixture, between the bottom side of the cooker top and the

upper surface of any other appliance or internal shelf there must be a

clearance of at least 30 mm;

Keep at least 200mm from the periphery of the burners to any side or

rear wall with combustible surfaces or keep the appliance sides at least

50mm from walls with non-combustible surfaces.

There must be a distance of at least 650 mm between the hob and any

extractor hood or wall cupboard positioned immediately above it. The

distance to an overhead exhaust fan must be at least 750mm.

The duplicate data plate should be fixed in an accessible position close

to the appliance (inside face of cupboard door, side of cabinet etc).

Note: Keep a safe distance away from combustible constructions.

After installation, all burners should be tested individually and together

to ensure correct operation.

INSTALLATION IN KITCHEN CABINET WITH DOOR

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Omega OCG64XTGG Kookplaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Omega. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Omega OCG64XTGG Kookplaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Omega Kookplaten
Meer handleidingen voor Kookplaten

Veelgestelde vragen over Omega OCG64XTGG Kookplaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Omega OCI905TZ Kookplaat

Handleiding

Omega OCI604TZ Kookplaat

Handleiding

Omega OCC905TZ Kookplaat

Handleiding

Omega OCG604WX Kookplaat

Handleiding

Omega OCC70TZ Kookplaat

Handleiding

Omega OCG95FFECOM Kookplaat

Handleiding

Omega OCG63FFX Kookplaat

Handleiding

Omega OCG95FFETGG Kookplaat

Gerelateerde categorieën