Handleiding Richard Solo JK001 Mobiele oplader

Handleiding

Thank you for purchasing the RichardSolo 20800 mAh 3-Port Power Bank. Please read these

instructions before operation and save for future reference.

Charge 20800 3-Port Power Bank:

Connect included USB/micro-USB cable to Power Bank

micro-USB input port (4).

Charge via any powered USB port. Use AC/USB adapter

(not included) for faster results.

LEDs (7) flash in 25% increments and remain solid when

corresponding capacity* is reached.

*Note: LEDs may not provide an accurate reading while

battery is recharging. For optimum performance, make sure

all LEDs have stopped flashing and remain solid to ensure

full charge capacity. Total recharge time from 0% - 100% =

+/- 14 hours.

Charge your device:

Connect USB charge cable included with your device to Port 1, Port 2, or Port 3.

Press power button (6) to begin charging. Monitor charge status via screen icon

on your device.

Use Port 1/Port 2 for iPhone, iPod, iPad Mini, smartphones, and smaller 1A

devices.

Use Port 3 for iPad and larger 2.1A devices.

To stop charging, remove cable from your device.

*Note: Power Bank LEDs remain lit while device is charging and show remaining

battery capacity. When no connection is detected for 20 seconds, Power Bank shuts

off. When device is fully charged, Power Bank will trickle charge device until Power

Bank is disconnected or completely discharged.

Tandem charge* (charge Power Bank/device simultaneously):

Connect your own USB cable from device

to Power Bank Port 1, Port 2, or Port 3.

Press power button (6) to begin charging.

Connect included USB/micro-USB cable from

AC/USB adapter to Power Bank input port (4).

Device charges first followed by Power Bank.

Monitor charge status for device on its screen.

Monitor charge status for Power Bank via 4

built-in LEDs (7).

Package

Contents

• 20800 mAh

3-Port

Li-ion battery

• USB/micro-USB

charge cable

• Instructions

Check remaining charge capacity /

Use LED flashlight:

Press power button (6) once to check remaining

Power Bank charge capacity. 1 LED flashing = less than

25%; 1 LED solid = about 25%; 2 LEDs = about 50%;

3 LEDs = about 75%; 4 LEDs = about 75-100%.

Press power button (6) twice to illuminate built-in LED

flashlight (5). Press twice to switch off.

Specifications

Capacity: 20800 mAh

Cell Type: Li-ion battery

Input: DC 5V 1A

Port 1 Output: DC 5V 1A

Port 2 Output: DC 5V 1.5A

Port 3 Output: DC 5V 2.1A

Size: 0.87” x 3.15” x 6.3”

Weight: 15.1 oz. (429 gr)

USB Compatibility

Port 1 (1A): iPhone/iPod, smartphones,

MP3 players (standard charge)

Port 2 (1.5A): iPhone/iPod, smartphones,

MP3 players (slightly faster charge)

Port 3 (2.1A): iPad/tablets + iPhone/iPod,

smartphones, MP3 players (best for larger

devices)

Maintenance

Do not store in a depleted state —

battery power cells can be damaged.

Charge Power Bank at least once per

month when not in use.

Keep unit dry — avoid damp

conditions and corrosive materials.

Do not clean with harsh chemicals,

soaps or detergents.

20800 mAh 3-Port Power Bank INSTRUCTION MANUAL

USB output port 1 (5V 1A)

USB output port 2 (5V 1.5A)

USB output port 3 (5V 2.1A)

Micro-USB input port (5V 1.5A)

LED flashlight

Power button

4 LED charge capacity indicators

(25%, 50%, 75%, 100%)

1

1

1

1

1 3 5

1

5

2

2

2

2

2 4

6

2

6

7

3

3

3

3

4

5

4

1

7

6

32 5

4

Safety Instructions

Read all instructions and warnings prior to using this product. Failure to read and follow these

safety instructions could result in fire, explosion, electrical shock or other hazard causing

serious and/or fatal injury and/or property damage.

Do not modify, disassemble,

open, drop, crush, puncture

or shred this product.

Do not expose this product

to rain or water.

Avoid excessive heat

(open flame, sunlight,

etc.).

Keep away from high

voltage devices.

This product is not

a toy — keep away

from children.

Questions? Please email us at: RichardSoloHelp@gmail.com 2301 Kerner Blvd. Suite C, San Rafael, CA 94901 USA www.RichardSolo.com

1 3 5

2

4

*Note: total recharge time is longer in tandem mode.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Richard Solo JK001 Mobiele oplader. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Richard Solo. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Richard Solo JK001 Mobiele oplader in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Richard Solo Mobiele opladers
Meer handleidingen voor Mobiele opladers

Veelgestelde vragen over Richard Solo JK001 Mobiele oplader

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.