Handleiding Ryobi TS1346 Verstekzaag

Handleiding

Page 4

Safe operation of this power tool requires that you read and

understand this operator's manual and all labels affixed to

the tool. Safety is a combination of common sense, staying

alert, and knowing how your miter saw works.

READ ALL INSTRUCTIONS

■ KNOW YOUR POWER TOOL. Read the operator's

manual carefully. Learn the saw's applications and limita-

tions as well as the specific potential hazards related to

this tool.

■ GUARD AGAINST ELECTRICAL SHOCK by prevent-

ing body contact with grounded surfaces such as pipes,

radiators, ranges, refrigerator enclosures.

■ KEEP GUARDS IN PLACE and in good working order.

■ REMOVE WRENCHES AND ADJUSTING KEYS. Get in

the habit - before turning on tool - that hex keys and

adjusting wrenches are removed from tool.

■ KEEP THE WORK AREA CLEAN. Cluttered work areas

and work benches invite accidents. DO NOT leave tools

or pieces of wood on the saw while it is in operation.

■ DO NOT USE IN DANGEROUS ENVIRONMENTS. Do

not use power tools near gasoline or other flammable

liquids, in damp or wet locations, or expose them to rain.

Keep the work area well lit.

■ KEEP CHILDREN AND VISITORS AWAY. All visitors

should wear safety glasses and be kept a safe distance

from work area. Do not let visitors contact tool or exten-

sion cord while operating.

■ MAKE WORKSHOP CHILDPROOF with padlocks and

master switches or by removing starter keys.

■ DO NOT FORCE THE TOOL it will do the job better and

safer at the rate for which it was designed.

■ USE THE RIGHT TOOL FOR THE JOB. Do not force the

tool or attachment to do a job it was not designed for. Use

it only the way it was intended.

■ USE THE PROPER EXTENSION CORD. Make sure

your extension cord is in good condition. Use only a cord

heavy enough to carry the current your product will draw.

An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. A wire gage

size (A.W.G.) of at least 14 is recommended for an

extension cord 25 feet or less in length. If in doubt, use the

next heavier gage. The smaller the gage number, the

heavier the cord.

■ INSPECT TOOL CORDS AND EXTENSION CORDS

PERIODICALLY and, if damaged, have repaired at your

nearest authorized service center. Stay constantly aware

of cord location and keep it well away from the moving

blade.

■ DRESS PROPERLY. Do not wear loose clothing, gloves,

neckties, rings, bracelets, or other jewelry that can get

caught and draw you into moving parts. Nonslip footwear

is recommended. Also wear protective hair covering to

contain long hair.

RULES FOR SAFE OPERATION

■ ALWAYS WEAR SAFETY GLASSES WITH SIDE

SHIELDS. Everyday eyeglasses have only impact-resis-

tant lenses; they are NOT safety glasses.

■ WEAR A DUST MASK to keep from inhaling fine par-

ticles.

■ PROTECT YOUR HEARING. Wear hearing protection

during extended periods of operation.

■ SECURE WORK. Use clamps or a vise to hold work

when practical. It's safer than using your hand and frees

both hands to operate tool.

■ DO NOT OVERREACH. Keep proper footing and bal-

ance at all times.

■ MAINTAIN TOOLS WITH CARE. Keep tools sharp and

clean for better and safer performance. Follow instruc-

tions for lubricating and changing accessories.

■ DISCONNECT ALL TOOLS. When not in use, before

servicing, or when changing attachments, all tools should

be disconnected.

■ AVOID ACCIDENTAL STARTING. Be sure switch is off

when plugging in any tool.

■ USE RECOMMENDED ACCESSORIES. Consult the

operator's manual for recommended accessories. The

use of improper accessories may case risk of injury.

■ NEVER STAND ON TOOL. Serious injury could occur if

the tool is tipped or if the blade is unintentionally contacted.

■ CHECK DAMAGED PARTS. Before using the tool, a

guard or other part that is damaged should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting and any other conditions that may affect its

operation. A guard or other part that is damaged must be

properly repaired or replaced by an authorized service

center to avoid risk of personal injury.

■ NEVER LEAVE TOOL RUNNING UNATTENDED, TURN

THE POWER OFF. Do not leave tool until it comes to a

complete stop.

■ FIRMLY CLAMP OR BOLT your miter saw to a work-

bench or table at approximately hip height.

■ USE ONLY CORRECT BLADES. Use the right blade

size, style and cutting speed for material and type of cut.

Do not use blades with incorrect size holes. Never use

blade washers or blade bolts that are defective or incor-

rect. The maximum blade capacity of your saw is 10 in.

■ KEEP BLADES CLEAN, SHARP, AND WITH SUFFI-

CIENT SET. Sharp blades minimize stalling and kick-

back.

■ DO NOT REMOVE THE SAW'S BLADE GUARDS.

Never operate the saw with any guard or cover removed.

Make sure all guards are operating properly before each

use.

■ KEEP HANDS AWAY FROM CUTTING AREA. Do not

reach underneath work or in blade cutting path with

hands and fingers for any reason. Always turn power off.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Ryobi TS1346 Verstekzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Ryobi. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Ryobi TS1346 Verstekzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Ryobi Verstekzagen
Meer handleidingen voor Verstekzagen

Veelgestelde vragen over Ryobi TS1346 Verstekzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Ryobi RMS18190-0 Verstekzaag

Handleiding

Ryobi TSS701 Verstekzaag

Handleiding

Ryobi ETMS1825 Verstekzaag

Handleiding

Ryobi CMS1825L Verstekzaag

Handleiding

Ryobi EMS190DC Verstekzaag

Handleiding

Ryobi RMS18254X-0 Verstekzaag

Handleiding

Ryobi R18MS216-0 Verstekzaag

Handleiding

Ryobi TSS101L Verstekzaag

Gerelateerde categorieën