Handleiding Sierra Designs Comet CD Tent

Handleiding

S I E R R A D E S I G N S

SIERRA DESIGNS 1255 Powell Street Emeryville, CA 94608 Phone: 510-450-9555 Fax: 510-654-0705 Toll Free: 800-635-0461

SIERRA

DESIGNS

ESTABLISHED 1965

COMET CD

Your Sierra Designs

COMET CD (Computer-aided

Design) tent is very easy to

pitch and maintain. Follow

these instructions to pitch

your tent quickly, safely

and easily.

First Pitch

In order to familiarize yourself with your new tent, we

suggest that you “test pitch” it before embarking on a

wilderness trip.

Select a Site

Look for a level spot that is protected from the wind in

order to ensure sleeping comfort. Clear the area of debris such

as sharp stones and sticks which might abrade or puncture the

tent floor. Choose an area that will drain well when it rains.

Unfurl the Tent and Assemble the Poles

Unfurl the tent and lay the tent floor flat on the ground with

the door unzipped. Carefully unfold the shock corded pole sec-

tions and allow them to slide together. Do not allow the poles

to snap together: This can lead to serious pole damage. Make

certain that the insert of each pole section is fully inserted

into the next pole section (Figure 1). You will have three

poles of equal length.

Figure 1: Correct Pole Assembly

Stake Out the Tent Floor

The Comet CD is a freestanding tent. Staking out the floor is

not necessary in order to pitch it. However, we recommend

that you stake down the tent after it is pitched for greater sta-

bility in high winds.

Erect the Tent

Insert one pole into the pole sleeve which runs from point A

to point E (Figure 2). Insert another pole into the pole sleeve

running from B to D. Insert the metal tips of the pole ends

into their respective grommets at points A and B. Then, from

the opposite end of the tent push the poles into the pole

sleeves, one at a time, making them flex into an even curve,

until you can insert the other ends of the poles into the grom-

mets at points D and E. Next, insert the metal tips of the

remaining pole into the grommets at points C and F. Locate

the Swift Clip

™

at the apex of the tent, along the C-F axis,

and attach it to the C-F pole. Following the seam along the

path of the pole, attach the remaining Swift Clips to the pole.

Flysheet

Drape the fly over the tent and position the vestibule zippers

over the front and back door (Figure 3). Attach the fly to the

tent poles via Velcro

®

attachments located underneath the fly

at points L, M, N and O. At each pole end (points A, B, C,

D, E and F) there are ¾" side-release “fly-clip” buckles. Clip

these buckles into their corresponding mates on the tent floor

and pull the straps until the fly is taut (Figure 4). Stake out

the fly vestibule away from the tent body at points G and H.

We recommend you stake out points I, J, and K for maximum

ventilation. The tent may be guyed out from points L, M, N

and O for maximum stability in high winds.

Ventilation

Besides staking and guying out all points listed above,

optimal airflow through the tent itself can be obtained by

leaving part of the double-zippered vestibule open.

Vestibule

The vestibule can be pitched in a variety of configurations to

address different weather, storage, ventilation, or wind condi-

tions. The vestibule door may be folded back on

itself on the inside and attached by the ¾" side release buckles

to form a half or one third door. The entire door may be

guyed out from points G and H to form a large awning, or it

may be folded in half to form a small

awning. Or, the vestibule door may be rolled entirely

out of the way, forming an unobstructed yet

protected entrance.

insert

incorrect

correct

Figure 2: Tent Body (top view)

COMET CD TENT CONTENTS

Tent Body & Rainfly: 1 Pitching Instructions: 1

Tent Poles: 3 Stake Sack: 1

Tent Stakes: 9* Pole Sack: 1

Guy Cord: 4

* Sierra Designs tents include stakes for pitching the body and fly under normal conditions.

Additional stakes may be required in severe conditons.

Figure 3: Flysheet (top view)

Figure 4: Fly Clip

A

B

C

D

E

F

I

J

K

L

M

N

O

G

H

A

B

C

D

E

F

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sierra Designs Comet CD Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sierra Designs. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sierra Designs Comet CD Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sierra Designs Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Sierra Designs Comet CD Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Sierra Designs Lightning HT 3 Tent

Handleiding

Sierra Designs Light Year Tent

Handleiding

Sierra Designs Lightning XT 4 Tent

Handleiding

Sierra Designs Wu Hu 6+2 Tent

Handleiding

Sierra Designs Mach 1 Tent

Handleiding

Sierra Designs Baku 2 Tent

Handleiding

Sierra Designs Benjari 6 Tent

Handleiding

Sierra Designs Asteroid CD Tent

Gerelateerde categorieën