Handleiding Sierra Designs Tengu Tent

Handleiding voor je Sierra Designs Tengu Tent nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 7 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461
Figure 5: Tent Fly (top view)
Figure 6: Clip Loc
Figure 4: LadderLoc
S I E R R A D E S I G N S
insert
correct
TENGU
Your Sierra Designs
TENGU tent is very
easy to pitch and maintain.
Follow these instructions
to pitch your tent quickly,
safely and easily.
Figure 1: Correct Pole Assembly
TENGU TENT CONTENTS
Tent Body & Rainfly: 1 Pitching Instructions: 1
Tent Poles: 2 Pole Sack: 1
Tent Stakes: 9* Stake Sack: 1
Guy Cord: 4
* Sierra Designs tents include stakes for pitching the body and fly under normal conditions. Ad-
ditional stakes may be required in severe conditions.
Figure 2: Quick Pitch Swivel Hub (side view)
Figure 3: Quick Pitch Swivel Hub (top view)
Erect the Tent
The main pole should be laid out parallel to the length of the
tent, A-B axis. Rotate the poles so that the tips of the poles are
separated (Figure 3). Insert the tips of the poles into the grom-
mets at points B & F (Figure 5). Move to the other side of the
tent and grab each pole end & insert the tips into the grommets
at points A & E. Starting at Point G clip all of the Sierra De-
signs RCT Swift Clips and Clip Locs (do not attach the bungee
yet) to the poles along the A – F & B – E axis. Next take the
remaining pole and feed through external pole sleeve that runs
along the H I axis. Once the pole is fed through the pole sleeve
insert the pole tips into the grommets provided at points C & D
(Figure 5). Now attach the bungee to the two Clip Locs by wrap-
ping the bungee in the direction crossing the open gate of the clip.
Wrap the cord around the pole intersection 2 to 4 times, depend-
ing on desired firmness, then, slide the cord into the groove on the
backside of the clip to keep it taught (Figure 6).
Fly Sheet
The Flysheet is already attached to the tent so all you need to
do is attach the ¾” LadderLoc fly attachments (Figure 4), to
their corresponding pole tips. At each pole end, points A-F,
you will find the fly attachments. Working your way around
the perimeter of the tent, hook the grommets at the end of the
adjustment straps over the pole tips at points A-F. Now pull
out point L on the back vestibule and stake to the ground.
Moving to the front of the tent pull out points J & K until the
vestibule is semi-taut and stake to the ground. The final step is
to adjust the fly attachments to the desired tautness. You can
guy out points H, I, M, N, O, & P for increased stability and
ventilation.
Ventilation
Proper ventilation is essential for creating a comfortable living
space inside your tent. The Tengu has a large front vestibule
that can be opened from the top to allow for air to enter the
inner tent. The back vestibule has a built in vent, in addition
to having the ability to unzip from the top down which allows
for better venting. Along with the above venting methods the
rainfly can be short sheeted for maximum cross flow ventila-
tion. To do this the fly attachment will need to be undone.
The next step is to roll up the bottom section of the rainfly and
use the clips provided, points H, I, O, & P. By doing this it
will expose the lower section of mesh on the inner tent.
First Pitch
In order to familiarize yourself with your new tent, we
suggest that you “test pitch” it before embarking on a
wilderness trip.
Select a Site
Look for a level spot that is protected from the wind in
order to ensure sleeping comfort. Clear the area of debris such
as sharp stones and sticks which might abrade or puncture the
tent floor. Choose an area that will drain
well when it rains.
Unfurl the Tent and Assemble the Poles
Unfurl the tent and lay flat on the ground so that the two
toned blue rainfly is facing up. You will notice that the inner
tent is already attached to the rainfly, which will make your
initial set-up quick and easy. Now carefully unfold the shock
corded pole sections and allow them to slide together. Do not
allow them to snap together: This can lead to serious pole dam-
age. Make certain that the insert of each pole section is fully
inserted into the next section (Figure 1). There are two poles
for the Tengu, one main pole that is connected by the Sierra De-
signs Quick Pitch Swivel Hub (Figure 2 & 3), and the second
pole will be used for the vestibule.
Stake Out the Tent Floor
Although the Tengu is a completely freestanding tent, we sug-
gest that you always stake out the tent floor for greater safety
and stability, especially in high winds. You will notice that
at each stake loop there is also a ¾” LadderLoc fly attachment,
do not use these until the tent is fully erected (Figure 4). First
stake down the webbing loops at points A & E (Figure 5).
Then move to the other side of the tent and pull the webbing
loops at points B & F until the floor is square and semi taught,
and then stake them down.
Download de handleiding in het Nederlands en/of Engels (PDF, 0.36 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Sierra Designs Tengu Tent vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Sierra Designs Tengu Tent?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Sierra Designs Tengu Tent. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sierra Designs Tengu Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sierra Designs. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sierra Designs Tengu Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Sierra Designs
Model Tengu
Categorie Tenten
Bestandstype PDF
Bestandsgrootte 0.36 MB

Alle handleidingen voor Sierra Designs Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Sierra Designs Tengu Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Kan ik mijn tent ook nat opbergen? Geverifieerd

Alleen voor zeer korte periodes. Wanneer een tent een week of langer nat wordt opgeborgen, kan deze gaan schimmelen. Dit is zeer schadelijk voor de tent en eventueel uw gezondheid.

Ik vind dit nuttig (384) Lees meer

Hoe kan ik een tent impregneren? Geverifieerd

Zet de tent op, reinig het doek en laat het drogen. Breng het impregneermiddel aan op het doek met een plantenspuit of andere spray. Het is ook mogelijk een nieuwe verfroller of kwast te gebruiken. Het doek dient helemaal verzadigd te worden met het impregneermiddel. Behandel ook de binnenkant van het doek. Veeg de ramen en andere onderdelen dan het tentdoek goed schoon met een vochtige doek. Laat het impregneermiddel hier niet op drogen. Laat vervolgens het tentdoek goed drogen. Herhaal indien nodig de behandeling.

Ik vind dit nuttig (285) Lees meer

Kan ik een scheur of gat in mijn tentdoek zelf repareren? Geverifieerd

Voor synthetisch tentdoek zijn er speciale stukken zelfklevend reparatiedoek verkrijgbaar. Plak aan beide zijden van het doek een stuk zelfklevend tentdoek over het scheurtje of gaatje. Gebruik voor katoenen tentdoek of tentdoek van gemengd materiaal opstrijkbaar tentdoek. Hiervoor heb je een strijkijzer nodig.

Ik vind dit nuttig (218) Lees meer

De rits van mijn tent loopt stroef, wat kan ik doen? Geverifieerd

Gebruik bij stroeve ritsen een droge PTFE spray of siliconenspray. Spray niet op de stof en spuit de ritsen af en toe preventief in om problemen in de toekomst te voorkomen.

Ik vind dit nuttig (156) Lees meer

Er zitten waterdruppels aan de binnenkant van de tent, betekent dit dat de tent lekt? Geverifieerd

Nee, dit is waarschijnlijk conden. Zorg dat de tent goed geventileerd is om consens tot een minimum te beperken.

Ik vind dit nuttig (129) Lees meer

Welke soort tentharingen heb ik nodig? Geverifieerd

Op gras- en bosgrond gebruik je halfronde of kunststof tentharingen. Op steengronden gebruik je rotspennen. Op kleigrond gebruik je halfronde, kunststof of universele tentharingen. Op kiezelgrond gebruik je halfronde of universele tentharingen. Op fijne zandgronden zoals duinen gebruik je houten tentharingen.

Ik vind dit nuttig (105) Lees meer

Het impregneermiddel laat witte vlekken of een witte waas achter op het doek, wat kan ik hier aan doen? Geverifieerd

Indien er een witte waas achterblijft of u witte vlekken ziet op uw tentdoek na het impregneren heeft u op die plekken meer impregneermiddel aangebracht dan elders. Dit is niet erg en de vlekken en waas verdwijnen vaak vanzelf. Het is niet verstandig minder impregneermiddel te gebruiken om vlekken of een waas te voorkomen. Het doek moet goed nat zijn van het impregneermiddel om een goede impregnatie te garanderen.

Ik vind dit nuttig (97) Lees meer
Handleiding Sierra Designs Tengu Tent

Gerelateerde producten

Gerelateerde categorieën