Handleiding SIIG CE-MT0212-S1 Muurbeugel

Handleiding voor je SIIG CE-MT0212-S1 Muurbeugel nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 1 veelgestelde vraag, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

Caution
A B C D E F G
04-0527C
Full-Motion LCD/TV Monitor Mount - 10" to 24"
Installation Instructions
(x2) M6X60
bolt
(x2) M6 concrete
anchor
(x4) M6 small
washer
(x2) M6 large
washer
(x4) M4X12
screw
(x4) M5X12
screw
Tools Required: Electronic stud finder, #2 Phillips head screw driver, drill, 1/8" drill bit (wood stud installation), 5/16" masonry
drill bit (concrete/brick wall installation).
Do not install near heater, fireplace, air conditioning, in direct sunlight, or any other heat producing source.
Failure to do so may result in damage to the display and could increase the risk of fire.
The wall structure must be capable of supporting at least the maximum load capacity as indicated. If not, the
wall must be reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in
the installation instructions, must be adhered to. Failure to do so could result in serious personal injury.
When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it
is recommended that the wood studs be a minimum of 16" apart.
It is recommended that two people perform the installation. Injury and/or damage can result from dropping or
mishandling the display.
(x4) M6X12
screw
Prior to the installation of this product, the installation instructions should be read and completely understood.
The installation instructions must be read to prevent personal injury and property damage. Keep these
installation instructions in an easily accessible location for future reference.
CAUTION: The maximum load capacity is 33 lbs (15kg). Use with products exceeding the maximum load
capacity may cause serious injury. See apparatus instructions.
Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any
surface other than wood studs, use suitable hardware (not included but commercially available) .
Hardware Kit
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could
result in damage to the display and/or damage to the mounting surface.
1
Download de handleiding in het Nederlands en/of Engels (PDF, 0.36 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de SIIG CE-MT0212-S1 Muurbeugel vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de SIIG CE-MT0212-S1 Muurbeugel?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de SIIG CE-MT0212-S1 Muurbeugel. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je SIIG CE-MT0212-S1 Muurbeugel. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met SIIG. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van SIIG CE-MT0212-S1 Muurbeugel in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk SIIG
Model CE-MT0212-S1
Categorie Muurbeugels
Bestandstype PDF
Bestandsgrootte 0.36 MB

Alle handleidingen voor SIIG Muurbeugels
Meer handleidingen voor Muurbeugels

Veelgestelde vragen over SIIG CE-MT0212-S1 Muurbeugel

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Kan ik mijn muurbeugel ook aan een gipswand bevestigen? Geverifieerd

Ja, maar hiervoor dienen speciale pluggen gebruikt te worden. Voor bevestiging aan een holle gipswand dient de muurbeugel aan het houten frame achter de wand bevestigd te worden.

Ik vind dit nuttig (209) Lees meer
Handleiding SIIG CE-MT0212-S1 Muurbeugel