Handleiding Sony SEL2470GM2 Objectief
Handleiding voor je Sony SEL2470GM2 Objectief nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 1 veelgestelde vraag, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
交換レンズ
Interchangeable Lens
Objectif interchangeable
取扱説明書
Operating Instructions
Mode d’emploi
Manual de instrucciones
FE 24-70mm
F2.8 GM Ⅱ
E-mount
SEL2470GM2
https://www.sony.net/
©2021 Sony Corporation
Printed in Thailand
5-032-882-01(2)
–1
(1) (2)
–2
–3
(1)
(3)
(2)
(1)
(2)
2 12
1
9
6 7 83 4 5
16
15141312
1918
11
17
10
a
a
使用上のご注意
フラッシュ使用時のご注意
周辺光量について
各部のなまえ
レンズの取り付けかた／取りはず
しかた
取 り 付 け か た（ イ ラ ス ト
–
参照）
1
レンズリヤキャップとカメラのボディ
キャップをはずす。
2
レンズとカメラの白の点（マウント標点）を
合わせてはめ込み、レンズを軽くカメラに押
し当てながら、時計方向に「カチッ」とロック
がかかるまでゆっくり回す。
3
レンズフロントキャップをはずす。
取りはずしかた
1
レンズフロントキャップを取り付ける。
2
カメラのレンズ取りはずしボタンを押した
まま、レンズを反時計方向に回してはずす。
（イラスト
–
参照）
レンズフードを取り付ける
レンズフードの赤線をレンズの赤線（レンズ
フード指標）に合わせてはめ込み、レンズフード
の赤点とレンズの赤線が合って「カチッ」という
まで時計方向に回す（1）。
取りはずしかた
レンズフードのフード取りはずしボタンを押し
ながら、反時計方向に回してはずす。
ズームする
ズームリングを回して、希望の焦点距離（ズーム
の位置）に合わせる。
ズーム操作感切り替えスイッチについて
（イラスト
-a
参照）
ピントを合わせる
A F（ オ ー ト フ ォ ー カ ス ）／ M F（ マ ニ ュ ア ル
フォーカス）の切り替え
レンズ側の設定
フォーカスモードスイッチを、AFまたはMFの
いずれか設定したいほうに合わせる（1）。
AF/MFコントロールボタンを装備したカメラをお
使いの場合
フォーカスホールドボタンを使用
する
絞りを調節する
IRIS LOCKスイッチ
ご注意
-a
主な仕様
商品名
（型名）
FE 24-70mm F2.8 GM Ⅱ
(SEL2470GM2)
焦点距離（mm）
24-70
焦点距離イメージ*
1
（mm）
36-105
レンズ群一枚
15-20
画角1*
2
84°-34°
画角2*
2
61°-23°
最短撮影距離*
3
（m） 0.21-0.3
最大撮影倍率（倍） 0.32
最小絞り
F22
フィルター径（mm）
82
外形寸法（最大径×長さ）
（約：mm）
87.8 × 119.9
質量（約：g）
695
手ブレ補正機能
This instruction manual explains how to use
lenses. Precautions common to all lenses such
as notes on use are found in the separate
“Precautions before using”. Be sure to read both
documents before using your lens.
This lens is designed for Sony α camera system
E-mount cameras. You cannot use it on A-mount
cameras.
The FE 24-70mm F2.8 GM Ⅱ is compatible with the
range of a 35mm format image sensor.
A camera equipped with a 35mm format image
sensor can also be set to shoot at APS-C size.
For details on how to set your camera, refer to its
instruction manual.
For further information on compatibility, visit the
web site of Sony in your area, or consult your dealer
of Sony or local authorized service facility of Sony.
For Customers in the U.S.A.
For question regarding your product or for the Sony
Service Center nearest you,
call 1-800-222-SONY (7669).
Supplier’s Declaration of Conformity
Trade Name : SONY
Model : SEL2470GM2
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego, CA 92127
U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Notes on Use
• Do not leave the lens exposed to the sun or a bright
light source. Internal malfunction of the camera
body and lens, smoke, or a fire may result due to the
effect of light focusing. If circumstances necessitate
leaving the lens in sunlight, be sure to attach the lens
caps. When shooting against the sun, keep the sun
completely out of the angle of view.
• When carrying a camera with the lens attached,
always firmly hold both the camera and the lens.
• Do not hold the lens by its extended part.
• This lens is not water-proof, although designed with
dust-proofness and splash-proofness in mind. If using
in the rain etc., keep water drops away from the lens.
• If the lens alone is shaken or if a camera with the lens
attached is shaken while the camera is turned off,
an internal component of the lens may rattle. This,
however, does not indicate a malfunction.
In addition, while you carry around the lens, your
movement may cause the internal lens groups to
shake. This, however, does not affect the performance
of the lens groups.
• Using this unit with products from other
manufacturers may affect its performance, leading to
accidents or malfunction.
Precautions on using a flash
• With certain combinations of lens and flash, the lens
may partially block the light of the flash, resulting in
a shadow at the bottom of the picture. In such a case,
adjust the focal length or the shooting distance before
shooting.
Vignetting
• When using the lens, the corners of the screen
become darker than the center. To reduce this
phenomena (called vignetting), close the aperture by
1 to 2 stops.
Identifying the Parts
1 Lens hood index
2 Focusing ring
3 Zooming ring
4 Focal-length scale
5 Focal-length index
6 Aperture ring
7 Aperture scale
8 Aperture index
9 Lens contacts*
10 Lens hood
11 Polarizing-filter window
12 Focus hold button
13 Focus mode switch
14 IRIS LOCK switch
15 Mounting index
16 Lens mount rubber ring
17 Hood release button
18 Aperture click switch
19 Zoom smoothness switch
*
Do not touch the lens contacts.
Attaching and Detaching the
Lens
• Before attaching/detaching the lens, hold the lens
by its mounting body. Do not hold it by any of its
operation controls, such as the focusing ring.
To attach the lens
(See illustration
–
.)
1
Remove the rear lens cap and the camera
body cap.
2
Align the white index on the lens barrel
with the white index on the camera
(mounting index), then insert the lens
into the camera mount and rotate it
clockwise until it locks.
• Do not press the lens release button on the
camera when mounting the lens.
• Do not mount the lens at an angle.
3
Remove the front lens cap.
• You can attach/detach the front lens cap in two
ways, (1) and (2).
To remove the lens
1
Attach the front lens cap.
2
While holding down the lens release
button on the camera, rotate the lens
counterclockwise until it stops, then
detach the lens. (See illustration
–
.)
Attaching the Lens Hood
It is recommended that you use a lens hood to
reduce flare and ensure maximum image quality.
Align the red line on the lens hood with the
red line on the lens (lens hood index), then
insert the lens hood into the lens mount and
rotate it clockwise until it clicks into place
and the red dot on the lens hood is aligned
with the red line on the lens (1).
• The polarizing-filter window can be opened (2) to
allow the polarizing filter (sold separately) to rotate
without having to remove the lens hood. While
shooting without filter operations or carrying around
the lens, however, keep the window closed.
• If the lens hood is not rotated until it clicks into
place, there is a possibility that a shadow appears on
captured images or the lens hood falls off.
• If the flash light is partially blocked by the lens hood,
a shadow may appear at the bottom of captured
images. In such a case, remove the lens hood.
• When storing, fit the lens hood onto the lens
backwards (3).
To remove the lens hood
While holding down the hood release button
on the lens hood, rotate the lens hood
counterclockwise.
Zooming
Rotate the zooming ring to the desired focal
length.
About the zoom smoothness switch
(See illustration
-a.)
You can set the tension for rotating the zooming
ring with the zoom smoothness switch.
To decrease the tension, slide the zoom smoothness
switch to “SMOOTH.” To increase the tension, slide
the zoom smoothness switch to “TIGHT.”
To keep the tension for rotating the zooming ring
light, it is recommended that the zoom smoothness
switch be set to “SMOOTH.”
To prevent unintended movement of the lens end
while shooting at an upward/downward angle or
carrying around the lens, it is recommended that the
zoom smoothness switch be set to “TIGHT.”
Focusing
• The focus mode switch of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
To switch AF (auto focus)/
MF(manual focus)
The focus mode can be switched between AF and
MF on the lens.
For AF photography, both the camera and lens
should be set to AF. For MF photography, either or
both the camera or lens should be set to MF.
To set the focus mode on the lens
Slide the focus mode switch to the
appropriate mode, AF or MF (1).
• Refer to the camera manuals to set the focus mode of
the camera.
• In MF, turn the focusing ring to adjust the focus (2)
while looking through the viewfinder, etc.
To use a camera equipped with an AF/MF
control button
• By pressing the AF/MF control button during AF
operation, you can temporarily switch to MF.
• Pressing the AF/MF control button during MF
operation lets you temporarily switch to AF if the lens
is set to AF and the camera to MF.
Using the Focus Hold Buttons
• The focus hold button of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
Press the focus hold button in AF to cancel AF. The
focus is fixed and you can release the shutter on
the fixed focus. Release the focus hold button while
pressing the shutter button halfway to start AF
again.
Adjusting the Aperture
IRIS LOCK switch
• Lock: You can lock the aperture ring at “A” on the
aperture scale, or rotate it between f/2.8 and
f/22.
• Release: You can rotate the aperture ring between “A”
and f/2.8 on the aperture scale.
When you align “A” on the aperture scale to the
aperture index, the camera is set to auto iris mode
and the exposure is set by the camera. And you can
adjust the amount of light manually between f/2.8
and f/22 by rotating the aperture ring.
Notes
Set the aperture click switch to “OFF” when shooting
movies. (See illustration
-a.)
When the aperture click switch is set to “OFF,” the
sound of the aperture ring is reduced. (For movie
recording)
If you change the aperture value while shooting a
movie with the aperture click switch set to “ON,” the
sound of the aperture ring will be recorded.
Specifications
Product name
(Model name)
FE 24-70mm F2.8 GM Ⅱ
(SEL2470GM2)
Focal length (mm) 24-70
35mm equivalent
focal length*
1
(mm)
36-105
Lens groups-elements 15-20
Angle of view 1*
2
84°-34°
Angle of view 2*
2
61°-23°
Minimum focus*
3
(m (feet)) 0.21-0.3 (0.69-0.99)
Maximum magnification (X) 0.32
Minimum aperture f/22
Filter diameter (mm) 82
Dimensions (maximum
diameter × height)
(approx., mm (in.))
87.8 × 119.9
(3 1/2 × 4 3/4)
Mass (approx., g (oz)) 695 (24.6)
SteadyShot No
*
1
This is the equivalent focal length in 35mm format
when mounted on an Interchangeable Lens Digital
Camera equipped with an APS-C sized image sensor.
*
2
Angle of view 1 is the value for 35mm cameras, and
angle of view 2 is the value for Interchangeable Lens
Digital Cameras equipped with an APS-C sized image
sensor.
*
3
Minimum focus is the distance from the image
sensor to the subject.
• Depending on the lens mechanism, the focal length
may change with any change in shooting distance.
The focal lengths given above assume the lens is
focused at infinity.
Included items
(The number in parentheses indicates the number
of pieces.)
Lens (1), Front lens cap (1), Rear lens cap (1),
Lens hood (1), Lens case (1),
Set of printed documentation
Design and specifications are subject to change
without notice.
and are trademarks of
Sony Group Corporation.
Loading…
Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony SEL2470GM2 Objectief. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony SEL2470GM2 Objectief in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Sony |
| Model | SEL2470GM2 |
| Categorie | Objectieven |
| Bestandstype | |
| Bestandsgrootte | 1.59 MB |
Alle handleidingen voor Sony Objectieven
Meer handleidingen voor Objectieven
Beoordeling
Laat ons weten wat je van de Sony SEL2470GM2 Objectief vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.Veelgestelde vragen over Sony SEL2470GM2 Objectief
Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.
Waarvoor staat de "f" notatie bij objectieven? Geverifieerd
De f-waarde staat voor het diafragmagetal. Dit is de brandpuntsafstand gedeeld door de apertuur (opening). Een hogere f-waarde betekent zodoende een kleinere opening en dus minder licht in de lens.
Ik vind dit nuttig (25) Lees meer
Praat mee over dit product
Laat hier weten wat jij vindt van de Sony SEL2470GM2 Objectief. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.