Handleiding Sony WM-GX674 Walkman Cassetterecorder

Handleiding

zOperating the

Walkman

Playing a Tape

(see Fig. C-a)

1 Open the cassette holder and

insert a cassette.

2 Make sure the HOLD function

is turned off. If it is on, slide the

HOLD switch to turn it off.

3 Press the jog lever on the

remote control, or press

ϥREPEAT on the main unit.

Adjust the volume with VOL.

When adjusting the volume on the

main unit

Set the VOL control on the remote

control at maximum.

When adjusting the volume on the

remote control

Set the VOL control on the main unit

to around 6.

Note on the cassette holder

When opening the cassette holder on

the main unit, make sure the tape is

stopped, then slide the OPEN switch.

If the cassette holder is opened when

the tape is running, the tape may

loosen and be damaged.

Radio Cassette-Corder

Operating Instructions

Sony Corporation © 1999 Printed in Japan

WM-GX674

WALKMAN is a registered trademark of Sony Corporation.

3-864-893-11(2)

English

zGetting Started

Choosing a Power

Source

Dry Battery (see Fig. A-a)

Attach the supplied battery case,

and then insert one R6 (size AA)

battery with correct polarity.

Note

• For maximum performance we

recommend that you use a Sony

alkaline battery.

Rechargeable Battery

(see Fig. A-b)

1 Insert the supplied

rechargeable battery (NC-

6WM) into the charger with

correct polarity.

2 Plug in the charger to the house

current (mains).

U.K., Australian, and Hong

Kong model: Full charging

takes about 3.5 hours.

U.S.A., Canadian, European

Continent, and Arabian

model: Full charging takes

about 2.5 hours.

Korean model: The full

charging time depends on the

voltage of your mains.

110 V: 10 hours

220 V: 2.5 hours

Other models: The full

charging time depends on the

voltage of your mains.

120 V: 10 hours

220–240 V: 2.5 hours

If the plug does not fit to your

mains, attach the supplied AC

plug adaptor (Excluding

Chinese model).

3 Insert the fully charged battery

into the rechargeable battery

compartment (see Fig. A-c).

You can charge the battery about

300 times.

When to replace/charge

the battery

Replace or charge the battery when

“n” flashes in the display.

The battery remainder mark has 3

steps to show the remaining battery

power.

Display Condition

Remote Main

control unit

There is enough

battery power.

The battery power

is decreasing.

The battery is

exhausted.

Replace it with a

new battery.

Notes

• When you insert a charged battery,

the battery remainder mark may

show “

” (“ ” on the main

unit) even if it is not fully charged.

• The battery remainder mark may

temporarily show a lower level

during fast forwarding or rewinding

or use in extremely low

temperatures.

(turn over)

B

Battery life (Approx. hours)

(EIAJ*)

Sony alkaline LR6 (SG)

Tape playback 31.5

Radio reception 32

MIC recording 10

Radio recording 6.5

Rechargeable battery (NC-6WM)

Tape playback 8.5

Radio reception 10

MIC recording 4

Radio recording 3

Sony alkaline LR6 (SG) and

Rechargeable NC-6WM

Tape playback 40

Radio reception 42

MIC recording 13

Radio recording 9

* Measured value by the standard of

EIAJ (Electronic Industries

Association of Japan). (Using a Sony

HF series cassette tape)

Note

• The battery life may shorten

depending on the operation of the

unit.

House Current

(see Fig. A-d)

Remove the rechargeable battery if

inserted. Attach the battery case and

connect the AC power adaptor AC-

E15HG (not supplied) to the DC IN

1.5 V jack of the battery case and to

the wall outlet.

Do not use any other AC power

adaptor.

Specifications for AC-E15HG vary

for each area. Check your local

voltage and the polarity of the plug

before purchasing.

Polarity of

the plug

Connecting the

earphones

(see Fig. B)

1 Connect the stereo mini plug

firmly to the remote control.

2 Connect the remote control to

2REMOTE.

3 Wear the “L” marked side to

the left ear and the “R” marked

side to the right ear.

If the earphones do not fit to

your ears or the sound is

unbalanced, adjust the

earphones to fit to your ears

firmly.

C

b

a

D

A-B Repeat

(see Fig. C-d)

A-B Repeat plays back repeatedly

any portion of the tape you

specified. Specify by tagging the

beginning (point A) and the end

(point B) of the portion during

playback.

On the remote control

1 Press the jog lever twice

quickly during playback to tag

point A.

“REP” appears in the display of

the remote control.

2 Press the jog lever once more to

tag point B.

“REP” will flash and the tape

will be rewound to point A.

Then the specified portion is

played repeatedly.

On the main unit

1 Press ϥREPEAT for 2

seconds or more during

playback to tag point A.

“A-” will flash in the display of

the main unit.

2 Press ϥREPEAT again to

tag point B.

“A-B” will flash and the tape

will be rewound to point A.

Then “REP” appears in the

display and the specified

portion is played repeatedly.

To cancel the A-B Repeat

playback

Press the jog lever on the remote

control or ϥREPEAT on the

main unit.

Notes

• You cannot specify a repeat portion

to include both sides of the tape.

• You cannot specify a repeat portion

of shorter than 2 seconds.

• After repeated operation, the actual

portion that is played back may shift

off somewhat from the exact portion

specified with the tags due to tape

slack.

• A-B Repeat will repeat 50 times

before returning to normal playback

if not canceled manually.

• Do not use the A-B Repeat function

with tapes longer than 90 minutes. If

you do, the tape may be damaged.

Recording

(see Fig. D-a)

You can record radio programs

from the built-in radio, or record

with the supplied microphone. In

either case, use a new or fully

charged battery.

Note

• If the record-protect tab is broken,

you cannot record on that side.

1 Insert a normal (TYPE I) tape.

To record on both sides

Insert the cassette with the side

to be first recorded on as the

FWD (forward) side*.

* Make sure that “FWD” is

displayed. If not, press and

hold p•RADIO OFF until

“REV” changes to “FWD”.

To record on one side only

Insert the cassette with the side

to be recorded on as the REV

(reverse) side**.

** Make sure that “REV” is

displayed. If not, press and

hold p•RADIO OFF until

“FWD” changes to “REV”.

Note

•When the cassette holder is

opened, the direction of the tape

will be automatically set to

“FWD”.

2 Select a recording source:

To record with the

microphone

Connect the supplied

microphone to the MIC (PLUG

IN POWER) jack.

You can attach the microphone

to your clothes as illustrated

(see Fig. D-b).

To record from the radio

Tune in to the station you want

to record (see “Listening to the

Radio”).

3 Slide REC.

"REC" appears in the display

and recording starts after about

2 seconds.

If you have started recording

from the FWD side, recording

will switch to reverse side

automatically at the end of the

FWD side.

To stop recording

Press p•RADIO OFF on the main

unit or press the jog lever on the

remote control.

Operation on the main unit

(see Fig. C-d)

To

Play the other

side

Stop playback

Fast forward

Rewind

Play the next

track/succeeding

9 tracks from the

beginning

(AMS*)

Play the current

track/previous 8

tracks from the

beginning

(AMS*)

Play the other

side from the

beginning (Skip

Reverse function)

Play the same

side from the

beginning

(Rewind Auto

Play function)

* Automatic Music Sensor

Note on AMS

• The AMS function detects a blank of

4 seconds or longer between the

tracks. If there is noise between the

tracks, AMS may not recognize the

blank and may not operate.

Likewise, if there is a low-level

segment within a track, AMS may

recognize it as a blank space.

Press

ϥREPEAT

during playback

p (stop)•RADIO

OFF

FF•AMS during

stop

REW•AMS

during stop

FF•AMS once/

repeatedly during

playback

REW•AMS once/

repeatedly during

playback

FF•AMS for

2 seconds or more

during stop

REW•AMS for

2 seconds or more

during stop

WARNING

To prevent fire or shock hazard, do not expose the

unit to rain or moisture.

A

a

b

c

d

DC IN 1.5 V

c

Tab for side A

Side A

b

a

p•RADIO OFF

REC

ISS

MIC

REC

d

U.K., Australian, and

Hong Kong model

Other models

Jog lever

Number of tracks to be skipped

Jog lever

Jog lever

2REMOTE

FWD (forward) side

REV (reverse) side

Operation on the remote

control

To

Play the other

side

Stop playback

Fast forward

Rewind

Play the next

track/

succeeding 9

tracks from the

beginning

(AMS*)

Play the current

track/previous

8 tracks from

the beginning

(AMS*)

Play the other

side from the

beginning

(Skip Reverse

function)

Play the same

side from the

beginning

(Rewind Auto

Play function)

* Automatic Music Sensor

Operation on the

jog lever and

display

Press for more than

a second during

playback

(Playing side FWD:

“r” on “FWD”.

Playing side REV:

“r” on ”REV”)

Press once during

playback

Jog upward for less

than a second

during stop

(“FF” appears)

Jog downward for

less than a second

during stop

(“REW” appears)

Jog upward once/

for the number of

tracks to be

skipped during

playback

(“AMS” and the

number of tracks to

be skipped appear)

(see Fig. C-b)

Jog downward

once/for the

number of tracks to

be skipped during

playback

(“AMS” and the

number of tracks to

be skipped appear)

(see Fig. C-c)

Jog upward for 2

seconds or more

during stop

(“FF” flashes)

Jog downward for

2 seconds or more

during stop

(“REW” flashes)

∫

∫

c

Number of tracks to be skipped

Jog lever

Jog lever

To reduce noise while

recording AM programs

Set the ISS (Interference Suppress

Switch) to the position that reduces

noise the most.

To monitor the recording

sound

You can monitor the recording

sound through headphones/

earphones. Adjust monitoring level

using VOL.

Note

• You may hear some noise in the

monitor sound in the RV, MB, or

GRV mode, but this does not affect

recording.

Notes on recording

• The recording level is fixed.

• Sound emphasis (RV, MB, or GRV),

AVLS and Dolby B NR settings do

not affect recording.

• Actual recording will start about 2

seconds after you slide REC. Slide

REC about 2 seconds before the

moment you want to start recording,

or you will miss the beginning of

your recording.

• When recording on both sides,

recording will not be made for about

10 seconds while the tape is

switching sides.

• Do not use a CrO

2 (TYPE II) or metal

(TYPE IV) tape. If you do, the sound

may be distorted when you play

back the tape, or the previous

recording may not be erased

completely.

• Do not connect or disconnect the

earphones to/from 2REMOTE

while recording from the radio. The

recording condition may change

abruptly, or noise may be recorded.

• To avoid noise interference, do not

place it near a lamp cord or a

fluorescent lamp when recording

with the microphone.

• If a howling effect occurs, turn down

the volume.

• All other operation cannot be made

while recording. For other operation,

stop recording first.

To prevent a tape from

being accidentally recorded

over (see Fig. D-c)

Break off the tabs from side A and/or

B. To reuse the tape for recording,

cover the tab hole with adhesive tape.

µ

µ

µ

µ

REW•AMS

FF•AMS

ϥREPEAT

p•RADIO OFF

VOL

HOLD

VOL

ϥREPEAT HOLD

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony WM-GX674 Walkman Cassetterecorder. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony WM-GX674 Walkman Cassetterecorder in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sony Cassetterecorders
Meer handleidingen voor Cassetterecorders