Handleiding Sunding SD-548C Fietscomputer

Handleiding

Sunding Bicycle Computer

SD-548C (14Functions)

FUNCTIONS

- SPD CURRENT SPEED

- ODO ODOMETER （0.001～99999km/m)

- DST TRIP DISTANCE

- MXS MAXIMUM SPEED

- AVS AVERAGE SPEED

- TM ELAPSED TIME .

- CLK CLOCK （12H/24H）

- SCAN

- “+” “－” COMPARATOR

- SETTING SPEED SCALE（km/h,m/h）

- SETTING TYRE CIRCUMFERENCE : （ 0mm ～

9999mm）

- SETTING THE LAST VALUE OF

ODOMETER/ODO

- FREEZE FRAME MEMORY

- AUTO ON/OFF

Computer Battery Installation

Remove the battery cover from the bottom of the computer

by using a flat blade screwdriver, install one CR2032

battery with the positive (+) pole facing the battery cover

and replace the cover. Should the LCD show irregular

figures, take out the battery and reinstall it.

Sensor Transmitter Battery Installation

Remove the battery cover

from the bottom of the

computer by using a flat blade

screwdriver, install one 23A

12V battery with the positive

(+) pole facing the battery

cover and replace the cover.

Should the LCD show

irregular figures, take out the battery and re-install it.

Sensor Transmitter

Attach the sensor transmitter to the left fork blade, the

distance between computer and the sensor can not exceed

60cm, the closer the batter. Using the shims to adjust the

diameter, and using the cable

ties(show below) to tie it with the

fork. Position the sensor

transmitter and magnet as shows,

make sure that the arc of the

magnet intersects the alignment mark on the sensor

transmitter with 1.5mm clearance.

Mounting Shoe

Attach the mounting shoe with the cable ties to the

handlebar, adjust

the mounting shoe on the handlebar with

the shims to

hold its position

.

Computer

Attach the computer to the mounting shoe by sliding the

unit until it snaps firmly into its postion. To remove it, press

the button on it in the opposite direction.

To check for proper speed function and sensor alignment,

spin the front wheel with computer in speed mode. Adjust

the position of sensor and magnet when there is no or weak

reaction.

Wheel Size Input

‘2060’ appears on the screen when the battery has been

installed, with one figure flashing,choose the correct wheel

circumference from the table below.Press RIGHT button to

advance digits as needed and LEFT button to confirm and

advance. (The circumference ranges 0mm～9999mm), press

LEFT button to enter KM/M mode.

Setting（

（（

（km/h）

））

）/（

（（

（m/h）

））

）

Press the RIGHT button to choose km/h or

m/h. Press the LEFT button to enter

CLOCK mode.

CLK Mode(12H/24H)

In CLOCK Mode, press the LEFT button

for 3 seconds to enter 12/24H selection.

Re-press the LEFT button for 12/24

exchanging. Press the RIGHT button to

enter Hour setting mode, when the figure

indicating HOUR start to flash, press the LEFT button to

adjust it.

Continue to press the RIGHT button to enter Minute setting

mode, when the figure indicating MINUTE start to flash,

press the LEFT button to adjust it and RIGHT button to

confirm, press the RIGHT button again to ODO mode.

Setting the Last value of

Odometer

In ODO mode, press the LEFT button

for 2 seconds to set the ODO value,

its initial value is 0000.0. when one

figure flashing, press RIGHT button to adjust it and

LEFT button to confirm it and start to set the next

figure.(after re-install the battery, latest value can

be inputted according to the value exists before the

battery is re-installed).

Reset of Mileage Parameter

In ODO mode, press and hold both RIGHT and LEFT

button simultaneously for 3 seconds to clear the tire

circuference and (km/m) setting, The user need to reset the

tire circumference and (km/m), the original ODO value and

CLOCK will remain unaffected.

Speedometer

Speed is shown all the time on the screen, its maximum

reading is 99.9km/h(m/h), and it’s accurate to +/- 0.1km/h

(m/h).

Speed Comparator

During riding , ‘+’and ‘-’ indicates the current speed is

higher or lower than average speed(AVS) .

Odometer

In ODO mode , the total distance is

indicated on the screen, its mileage

range is 0.001 ～ 99999km(m). the

display will be back to 0 when value

exceeds its maximum limit, press the RIGHT button to enter

DST mode..

Trip Distance (DST)

In DST mode, the distance for one trip

is indicated on the bottom line. DST

ranges from 0.001～9999km(m), when

the value exceed the range limit, it

restarts from 0 automatically. Both the time and the

distance records will be cleared when the time of one trip

exceed the range limits.

press the LEFT button for 5 seconds to clear the records of

DST,MXS,AVS and TM.

Press the RIGHT button to enter MXS mode.

Maximum Speed (MXS)

In MXS mode, maximum speed is

indicated on the bottom line. Press the

LEFT button for 5 seconds to clear the

records of MXS,DST,AVS and TM.

Press the RIGHT button to enter AVS mode.

Average Speed

In AVS mode, average speed is

indicated on the bottom line. Press the

LEFT button for 5 seconds to clear the

records of AVS,DST,MXS and TM.

Press RIGHT button to enter TM mode.

Trip Time

In TM mode, trip time is indicated on

the bottom line.TM ranges 0 :00 :00～

99 :59 :59. It will be back to 0 when

value exceed the limits.

Press the LEFT button for 5 seconds to clear the records of

TM, DST,MXS and AVS.

Press the RIGHT button to enter SCAN mode.

SCAN

In Scan mode , DST, MXS, AVS and TM mode are

indicated in turn every 4 seconds.

Press the RIGHT button to enter CLOCK Mode.

Sleep Mode

If no signal has been inputted for 300 seconds, computer

will enter into Sleep Mode, and CLK value remains. It will

turn back to the former mode with all the data collected

when any signal is inputted or any button is pressed.

FREEZE FRAME MEMORY

Press the LEFT button in any time will enter into freeze

frame memory mode. Flashing TM data will appear on the

screen. Press the RIGHT button to view the records of DST,

MXS, AVS and TM.

Press the LEFT button to end it.

Buttons Instruction

Press the RIGHT button to choose any mode below :

ODO, DST, MXS, AVS, TM, SCAN（DST、MXS、AVS、

TM） and CLOCK. It’s unnecessary to press the LEFT

button except choosing the Freeze frame Memory mode.

In Freeze Frame Momery mode, press the RIGHT button,

several data will display, re-press LEFT button to turn back

to other modes.

Malfunctions and Problems

Malfunctions Problems

No speedometer

Improper magnet/sensor alignment

Distance between computer and

sensor transmitter exceed 60cm

Low battery voltage of sensor

transmitter or computer.

Short distance of

the transmitter or

no receiving

Lower battery voltage, need to

change for a new one.

Display Abnormal

figures

Too much Electromagnetic

interference around

Inaccurate value is

indicated

Improper input, such as wheel

circumference.

Slow display

respon se

Temperature exceeds operating

limits(0℃～55℃).

Black display

Temperature too high, or put in

direct sunlight for too long time.

Need take back to shadow place for

a period.

Weak display Poor battery contact or dead battery

Display shows

irregular figures

Take out battery and re-install it

after 10 seconds.

Sensor without

reaction

Put off the insulation film of the

sensor transmitter

Accessories

TIRE SIZE

CIRC

TIRE SIZE

CIRC

700c x 38mm 2180 26’’ x 2.25’’ 2115

700c x 35mm 2168 26’’ x 2.1’’ 2095

700c x 32mm 2155 26’’ x 2.0’’ 2074

700c x 30mm 2145 26’’ x 1.9’’/1.95’’ 2055

700c x 28mm 2136 26’’ x 1.75’’ 2035

700c x 25mm 2124 26’’ x 1.5’’ 1985

700c x 23mm 2105 26’’ x 1.25’’ 1953

700c x 20mm 2074 26’’ x 1.0’’ 1913

700cTubulari 2130 24’’ x 1.9’’/1.95’’ 1916

650c x 23mm 1990 20’’ x 1-1/4’’ 1618

650c x 20mm 1945 16’’ x 2.0’’ 1253

27’’ x 1-1/4’’ 2161 16’’ x 1.95’’ 1257

27’’ x 1-1/8’’ 2155 16’’ x 1.5’’ 1206

26’’ x 2.3’’ 2135

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sunding SD-548C Fietscomputer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sunding. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sunding SD-548C Fietscomputer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sunding Fietscomputers
Meer handleidingen voor Fietscomputers

Veelgestelde vragen over Sunding SD-548C Fietscomputer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Sunding SD-568 Fietscomputer

Handleiding

Sunding SD-538 Fietscomputer

Handleiding

Sunding SD-546AE Fietscomputer

Handleiding

Sunding SD-560 Fietscomputer

Handleiding

Sunding SD-571 Fietscomputer

Handleiding

Sunding SD-548A Fietscomputer

Handleiding

Sunding SD-536A Fietscomputer

Handleiding

Sunding SD-576A Fietscomputer

Gerelateerde categorieën