Handleiding Tesco DR1403G Radio

Handleiding

5 6 7 8 9

Tesco Stores Ltd,

Delamare Road, Cheshunt, Herts, EN8 9SL

DR1403 EN V0.4

There is a headphone output jack on the back panel of the

radio. If headphones are connected to this socket for private

listening, the speaker will cut out automatically.

Your Tesco appliance is covered by a warranty for 12 months

from the date of purchase. If a fault develops during this

period, please contact the TESCO electrical help line.

Please have your original purchase receipt with you when you

call. This warranty in no way aects your consumer rights.

Tesco Helplines:

Landlines 0800 323 4060 (Freephone from a BT landline).

Mobiles 0330 123 4060 (Calls cost no more than calls to

geographic numbers eg. 01 or 02 and are included in inclusive

minutes and discount schemes).

TROUBLESHOOTING

HEADPHONES

SPECIFICATIONS

CARE AND MAINTENANCE

DISPOSAL

WARRANTY

Poor quality radio reception

The aerial signal may not be adequate. Try adjusting the

aerial position while watching the signal strength on the

bargraph. Signal strength can be displayed by tuning to a

DAB station and pressing the Info/Menu button until the

signal strength bargraph is displayed.

Few DAB stations are available after moving area

The radio should be reset to renew the station list. Refer to

the ‘Factory Reset’ section on page 7.

Poor quality FM reception

If you are listening to a station with a weak signal, try

changing the Audio Setting to ‘Forced Mono’.

DAB DISPLAY MODES

The bottom line of the display can be switched to show

dierent items of information that may be transmitted with

a DAB station.

Choosing the information display

Press the Info/Menu button repeatedly to change the

information displayed while playing a DAB radio station.

The full range of display options are shown below. Some

stations may not broadcast all of these options.

DLS (Dynamic Label Segment): This is a scrolling message

giving real-time information - song titles, news headlines,

etc.

SIGNAL STRENGTH: This setting will display a signal strength

bargraph. The longer the bargraph, the stronger the signal.

Setting the display to show signal strength is useful when

setting up the aerial for the strongest signal.

PROGRAMME TYPE: This describes the style of the

programme being broadcast.

MULTIPLEX NAME: DAB Digital radio stations are broadcast

in multiplexes. Each multiplex is a bundle of radio stations

transmitted in a single frequency. There are national and

local multiplexes; local ones contain stations specic to your

area. This option displays the name of the multiplex name

that contains the station you are listening to.

MULTIPLEX NUMBER/FREQ: This option will display the

multiplex number and frequency that contains the station

you are listening to.

SIGNAL ERROR RATE: This option will display the level of

signal errors in the current broadcast. The lower the number,

the better the quality of the signal.

BIT RATE: DAB allows broadcasters to vary the BIT RATE (or

the amount by which an audio signal can be compressed)

depending on the type of broadcast. This enables the amount

of stations on a multiplex to be maximised. Speech and News

are often broadcast at a lower Bit Rate; music needs a higher

Bit Rate for good delity.

TIME AND DATE: Time and date are updated by broadcasted

information.

When rst used, your radio scanned the DAB band for

available stations. The station services found were then

stored in your radio’s memory.

You can re-scan the band at any time if you move to a dierent

area or just to refresh the stored list of available stations.

NOTE: On some occasions, when moving to a dierent area,

re-scanning may not fully update the station list. In this case

it may be necessary to reset your radio. (see the ‘Factory reset’

option on page 7).

DAB MENU OPTIONS

Full Scan

Manual Tune

Prune

System

DRC

Scan all DAB bands

Manually tune to a station multiplex

Set DRC values

Prune unused stations from the list

Press Volume/Select

Factory reset

Return all settings to factory original

SW version

Display the software version

Time

Set the clock manually

Backlight

Set the backlight brightness

Press Volume/Select

Press Volume/Select

Press Volume/Select

Press Volume/Select

Press the Tune +

button to select

the next option

Press Volume/Select

Press Volume/Select

Press Volume/Select

Press Volume/Select

Press the Tune +

button to select

the next option

DAB SETTINGS MENU

Your radio has some additional features and options that

may be reached through the Settings Menu.

A complete map of the menu is shown.

To enter the DAB Settings Menu

Set to DAB mode.•

Press and • hold the Info/Menu button.

The menu will be displayed.

Press the • Tune + or Tune - button to step through the

available options.

To choose an option from the menu, press the • Volume/

Select control.

Choose the ‘System’ menu option to open the sub-menu of

system options shown on the menu map.

Full Scan: Select Full Scan to re-scan the entire DAB band

and refresh the station list.

Manual Tuning: Manual tuning enables you to search the

band manually by pressing the Tune + or Tune - button to

step through the multiplex numbers and check if any have

usable signal strength on a bargraph display. Manual tuning

is not necessary in normal operation where scanning will

have established a station list of usable stations.

DRC: DRC is Dynamic Range Compression. Enabling DRC may

improve the sound of DAB radio when listening in a noisy

room.

Prune: If your station list includes stations that you can no

longer receive (you may have moved to a dierent area), you

can select the ‘Prune’ option to remove them and clean up

the Station List.

System>Time: Select the time option to set the clock

manually. This may be useful if you are in an area where it is

not possible to receive DAB radio broadcasts.

You can also choose automatic clock setting options to update

from a DAB station, FM station or any station.

System>Backlight: Select ‘Backlight’, then the ‘Normal

Mode’ or ‘Standby Mode’ sub-option to change the backlight

brightness settings when the radio is operational or set to

Standby.

System>Factory reset: Select the ‘Yes’ sub-option to reset

all the settings of your radio to factory original settings.

The station list will also be cleared and any stored preset

memories will be erased. After a factory reset the radio will

re-scan the band and renew the station list.

System>SW Version: This option will display the version

number of the control software currently installed in your

radio. This will be helpful to a technician who is servicing the

radio.

The bottom line of the display can be switched to show

dierent items of information that may be transmitted with

an FM station.

To change the display mode

Press the Info/Menu button repeatedly to change the

information displayed while playing an FM radio station.

The full range of display options are shown. Some stations

may not broadcast all of these options.

FM DISPLAY MODES

FM MENU OPTIONS

FM SETTINGS MENU

There are also some menu settings that are specic to FM

radio operation. These settings may be changed through the

Settings Menu.

To enter the FM Settings Menu

Set to FM mode.•

Press and • hold the Info/Menu button.

A map of the menu is shown below. The menu is navigated in

the same way as the DAB settings menu.

Scan Setting

System Setting

Audio Setting

MORE DETAIL OF THE FM SETTINGS MENU OPTIONS

Scan Setting: With this menu option you can set the

scanning sensitivity of the FM radio to two dierent levels-

‘Strong stations’ or ‘All stations’. Setting to ‘Strong stations’

will exclude weaker stations resulting in a quicker scan.

If you set to ‘All stations’ the scan will stop at every station

detected, even if the signal is weak.

Audio Setting: This option enables you to set the radio to

‘Forced Mono’ or ‘Stereo Allowed’. Setting Forced Mono may

be useful if the signal is weak and the broadcast is noisy

when listening in stereo via headphones.

System: The System sub-menu options are the same as those

described in the DAB settings section.

CARE AND CLEANING

All care and cleaning operations should be carried out with

the unit unplugged from the mains power and switched o.

The surface of the unit can be cleaned with a barely damp

cloth and then dried carefully. Never use abrasives, abrasive

cloths or chemical solvents .

Supply Voltage, Current : .... 5 V

, 1 A

AC Adapter input: ............... 100-240 V ~, 50-60 Hz, 200 mA

Batteries ............................ 4 x 1.5V

, ‘AA’ type batteries

Frequency range ................ 174-240 MHz (DAB)

........................................... 87.5-108MHz (FM)

Net Weight: ........................ 384 g

Class II construction double insulated.

This product must not be connected to earth.

To prevent possible hearing damage, do not

listen at high volumes for long periods.

UK: Waste electrical products/batteries should

not be disposed of with household waste.

Separate disposal facilities exist, for your nearest

facilities see www.recycle-more.co.uk or in-store

for details.

ROI: Produced after 13th August 2005. Waste

electrical products/batteries should not be

disposed of with household waste. Please recycle

where facilities exist. Check with your Local

Authority or retailer for recycling advice.

You can choose to listen to DAB or FM radio -

Selecting DAB or FM

Press the • DAB/FM button repeatedly to switch between

DAB and FM mode.

To change to the FM band

Press the • DAB/FM button to switch to the FM band.

FM will be displayed.

The radio will play the last FM station you were listening to.

To auto-tune to FM stations

Press and • hold the Tune + or Tune - button to search up

or down for the next station in the band.

The radio will search and the tuning frequency will be displayed

whilst searching.

When a usable station is detected the radio will stop tuning and

play the station. If RDS data is present, the station name and

scrolling radio text will be displayed. If RDS data is not present,

‘No Radiotext’ will be displayed.

To manually tune to FM stations

Press the • Tune + or Tune - button briey to tune up or

down the band in 50kHz steps.

FM stereo/mono

When listening to a weak or distant FM station in stereo via

earphones, there may be a high level of background noise.

In this case, setting mono reception may reduce the level of

background noise.

Press the • Volume/Select control to switch between

mono and stereo reception.

SELECTING DAB OR FM

LISTENING TO FM

Your radio can store up to 10 of your favourite stations as

presets on both the DAB and FM bands for quick recall.

To store a preset

Tune to the station you want to store as a preset.•

Press and • hold the Preset button.

‘Preset Store’ will be displayed.

Press the • Tune + or Tune - button repeatedly to choose

the preset number you want to store.

For each preset number the preset station currently stored will

be displayed or ‘(Empty)’ if none is stored.

Press the • Volume/Select control to conrm if you want

to store the station in the displayed preset number.

To recall any preset

Press the • Preset button briey.

‘Preset Recall’ will be displayed.

Press the • Tune + or Tune - button repeatedly to nd the

preset number you want to play.

Press the • Volume/Select control to play the preset.

The radio will re-tune and the preset number will be displayed.

DAB & FM PRESETS

DLS (Scrolling text)

Multiplex name

Programme type

Multiplex number/frequency

Audio bit rate/encoding

Signal error rate

Date

Time

Signal strength

RDS Radiotext

Stereo/Mono

Frequency

Time

Date

Programme type

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Tesco DR1403G Radio. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Tesco. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Tesco DR1403G Radio in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Tesco Radio's
Meer handleidingen voor Radio's

Beoordeling

Veelgestelde vragen over Tesco DR1403G Radio

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Tesco DR1404B Radio

Handleiding

Tesco DR1403B Radio

Handleiding

Tesco RAD112R Radio

Handleiding

Tesco RAD113 Radio

Handleiding

Tesco DR1704 Radio

Handleiding

Tesco RAD108 Radio

Handleiding

Tesco DR1502W Radio

Handleiding

Tesco DR1551W Radio

Gerelateerde categorieën