Home > Zakelijke goederen > Lamineermachines > Texet Lamineermachines > Texet LMA4V Lamineermachine

Handleiding Texet LMA4V Lamineermachine

Handleiding voor je Texet LMA4V Lamineermachine nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 1 comment en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

LMA4-V Instruction Manual

Thank you for choosing a TEXET laminator. We aim to supply quality

machines that create excellent results. Before operating the laminator –

please read and keep the user instructions for reference.

When using electrical appliances, basic precautions should always be followed to

reduce risk of injury or electric shock, including the following:

1. Always unplug the appliance when not in use.

2. This appliance is not intended for use by persons, (including Children), with

reduced physical, sensory or mental capabilities or lack of experience or

knowledge. They should be given supervision and instruction in the use of the

appliance, by a person responsible for their safety.

3. The laminator will become very hot in use and care should be taken when

handling the machine.

4. Protect against the risk of electrical hazards. Do not immerse the power cord,

plug or appliance in water or other liquids, or use near water.

5. Do not insert any metal objects or other foreign objects such as jewellery, hair,

fingers or clothing into the appliance.

6. Remove paper clips and staples before laminating.

7. Do not operate the appliance with a damaged plug or power cord or after the

appliance has malfunctioned or become damaged in some manner.

8. If the Power Cord is damaged , it must be replaced by a qualified Engineer in

order to avoid a hazard,

9. The appliance should be installed near the outlet socket and the socket should

be easily accessible.

10. Only laminate paper or board. Do not laminate unusual objects.

11. Do not use aerosol dusters or cleaners.

12. Do not spray anything into or lubricate the appliance.

Setup:

1. Operate the machine on a flat and stable surface.

2. Ensure there is enough clear space at the rear of the machine for the

laminated pouch to exit the machine.

3. The LMA4-V operates with laminating pouches 100 (2 x 50) micron – 160 (2 x

80) micron thick, (Credit card size to A4 size)

Operating the laminator:

The LMA4-V is operated by a rocker switch, located at the right hand side of the

appliance. There are 2 positions ON (l) and OFF (O)

1. Plug the machines cable into a convenient 13 Amp domestic supply outlet.

2. To Laminate select the ON (I) setting, laminating can begin when the

Green “Ready” light comes on, which indicates the Laminator is hot

enough to laminate, (Allow approx 3-5 minutes for the Laminator to warm

up).

3. Prepare the laminating pouch for inserting into the machine.

See How to

load a laminating pouch below

Do not use pouches thicker than

160mic (2 x 80mic per side)

4. When the machine has reached operating temperature, you may insert the

pouch, (sealed edge first), squarely into the machine until it engages with

the rollers. Never insert a pouch open edge first into the machine.

5. The pouch will move through the machine and exit at the rear.

6. During the process the READY light may go out as heat is absorbed by the

laminating pouch. This is normal.

7. Do not cut down Laminating Pouches to Laminate smaller sizes of Paper,

smaller sizes of Pouches are available, see below, please use these.

8. Turn the laminator to OFF (O) after use.

9. Always remove the plug from the power supply, when the Laminator is not

in use

IMPORTANT!

Do not touch the top of the machine during use, as it will get very hot and take

approximately 3-4 hours to cool down. Do not place items on top of the machine at

any time.

Laminating Pouch Sizes:

A4 – 303 x 216mm

A5 – 216 x 154mm

A6 – 154 x 110mm

A7 – 80 x 111mm

ID Card – 90 x 60mm

Credit Card – 86 x 54mm

Laminating capacity:

The LMA4V is a personal laminator designed for hot lamination so is only suitable

for home and small office use only. Do not use the appliance with pouches thicker

than 160 microns in thickness. Maximum Lamination thickness is 0.45mm, excluding

the pouch.

How to load a laminating pouch:

The laminating pouch is sealed along one side. Open the pouch and place the paper

to be laminated centrally inside the pouch as close to the sealed edge as possible.

Ensure there is an equal border all round the paper (e.g.: A4 paper should have a

3mm border). The sealed edge (not the open edges) is placed into the entry slot to

start the lamination process. Always watch the pouch during the

Laminating process to ensure it comes out the other side of the Laminator.

It may wrap around the rollers if not placed squarely and centrally in the entry slot.

In the unlikely event the pouch becomes jammed in the Laminator, please switch off,

do not open the appliance. Only a qualified service engineer should repair the

appliance.

Warranty & service:

Never service the product yourself. The appliance is guaranteed for 12 months from

date of purchase, subject to normal use. If the laminator is under warranty then return

it to the point of purchase for replacement or repair.

Beoordeling

Laat ons weten wat je van de Texet LMA4V Lamineermachine vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Texet LMA4V Lamineermachine?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Texet LMA4V Lamineermachine. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

patric clarke 23-01-2022
De machine is zeer eenvoudig te gebruiken en heeft met succes een aantal geïllustreerde pagina's die ik heb gemaakt om in een boek te binden, gelamineerd. Op meer dan de helft van de pagina's is het lamineervak echter 'nevelig' geworden, waardoor zwarte lijnen en letters er grijs uitzien en (bijvoorbeeld) paars licht lavendelblauw. Dit is buitengewoon teleurstellend omdat het artwork heeft verpest dat maanden heeft geduurd om te produceren. Ik vroeg me af of het nog een keer zou kunnen zijn om de pagina's door de laminator te laten lopen

beantwoord | Ik vind dit nuttig (0) (Vertaald door Google)

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Texet LMA4V Lamineermachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Texet. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Texet LMA4V Lamineermachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.