Handleiding Trek Sensor 2.0 Fietscomputer

Handleiding

Table 1. Setting values reference table

Preparation - Must be completed before operation

1. Measure the wheel circumference before setup

Refer to fig. 1 (25.4 mm equals 1 inch) or Table 1 to get the wheel

circumference in millimeters. Confirm and note this number in the manual

for later use here:__________

2. Installing/Replacing the battery.

Remove the battery cover by using a narrow flat blade

or similar opener as illustrated in fig. 2. Insert a new

battery (3v) CR2032, position the (+) pole upward as

illustrated. Place the battery properly into the case and

close the cover securely. After the battery is installed

speed scale and wheel size can be set.

3. Setting Speed Scale Choose KM for Kilometers

or MI for Miles.

After installing the battery, all displays will be

illuminated, the “SEL km” will remain on the screen

as in fig 3. Press either the Left (L) or Right (R)

Page 3Page 2

Wheel/Tire Size Wheel size Setting Wheel/Tire Size Wheel size Setting

16” 1300 700 X 20C 2074

20” X 1.75” 1600 700 X 23C 2085

24” X 1.95” 1920 700 X 25C 2100

26” X 1” 1950 700 X 28C 2135

650 X 20C 1945 700 X 32C 2155

650 X 23C 1990 700 X 35C 2175

26” X 1.5” 2030 700 X 38C 2180

26” X 1.9” 2055 700 X 40C 2190

26” X 2.0” 2074 700 X 1-1/4” 2160

26” X 2.2” 2100

Measure the distance which

is your circumference

First

Point

Second

Point

button to switch between miles and

kilometers. Press both L & R buttons to

confirm and enter Wheel-Circumference

setting as shown in fig 4.

If incorrect data appears on the screen,

please re-install battery again.

4. Setting the wheel circumference (100mm-2999mm)

Sensor 2.0 has 2 wheel circumference settings. The display shows 1/2155

and the last two digits “55” will flash. Advance them rapidly by holding

down the R button, or one at a time by pressing the R button ( or go

backward by holding the L button). When desired number (confirmed and

marked from fig. 1 or Table 1 and between 100mm-2999mm) has been

achieved, press both L & R buttons for confirmation and the next two

digits will flash. Repeat the same method to set up the completed

numbers. Press both L & R button to confirm then go to Odometer program

function (screen will show “ODO 00000”. Please see the following method

a. to complete Odometer setting). The display will show 2/2074, follow the

method of bike 1 to complete setting circumference & odometer for bike 2.

a. Dual Odometer (Settable)

When “00000” shows & blinks press L & R buttons at the same time, the

last two digits will flash. Advance them rapidly by holding down the R

button, or one at a time by pressing the R button. When desired number

has been achieved press both L & R buttons for confirmation and the next

three digits will flash. Repeat the same method to complete. Press both L

& R buttons to confirm and enter “ODO” function. If “ODO” program is not

necessary, press L or R for next function setting. Note: Dual Odometer

function is used for 2 bikes separate odometers. Bike 1 & bike 2 have their

own Odometer record. (The maximum distance of the odometer is 9,999

km or 6,213 mi.)

b. Review wheel-circumference value

Go to (ODO) Odometer function, press both L & R buttons at same time to

review display wheel-circumference value ( will last for 3 seconds) when

needed.

fig 2

fig 3

fig 4

Sensor2.0 6/12/00 10:06 AM Page 2

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Trek Sensor 2.0 Fietscomputer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Trek. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Trek Sensor 2.0 Fietscomputer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Trek Fietscomputers
Meer handleidingen voor Fietscomputers

Beoordeling

Veelgestelde vragen over Trek Sensor 2.0 Fietscomputer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Trek Incite 11i Fietscomputer

Handleiding

Trek Incite 8i Fietscomputer

Handleiding

Trek Sensor Fietscomputer

Handleiding

Trek Incite 6i Fietscomputer

Handleiding

Trek Incite 9i Fietscomputer

Handleiding

Cateye V2c Fietscomputer

Handleiding

Blackburn Atom SL 6.0 Fietscomputer

Handleiding

Prophete 0519 Fietscomputer

Gerelateerde categorieën