Handleiding Wahl 07061-100 LifeProof Scheerapparaat

Handleiding

432 5 6 7

14

9 10

8 1311 12

QUICK TIPS & HANDY

REMINDERS

1. If you are a first-time electric shaver user, or changing from

another brand, there will be a 2 to 3 week (or less) adjustment

period while your face and beard adapts to the new foil.

2. When you open your package, charge your shaver for 1 hour

before the first shave or until charging is complete.

3. Replace the foil head and cutter bars every 12 months or if foils

are damaged. Replacement foils can be ordered at https://home.

wahl.com.

4. Be sure to clean the shaver, cutter bars and foil after every three

or four shaves.

5. Use the pop-up long-hair trimmer to snip stray hairs.

6. Keep using and both your face and beard will adapt to the shaver.

TRAVEL LOCK

The Wahl 7061 Series Shaver comes with an electronic travel lock

to avoid accidental activation while transporting.

Hold power button down for 3 seconds to engage travel lock.

Hold power button down for 3 seconds to disengage travel lock.

When travel lock is active, pressing the power button will cause the

LED(s) to flash for 1 second.

NOTE: The shaver will not charge while the travel lock is engaged.

vertical or floor mount position.

15. Always attach plug to appliance first, then to outlet.

SAVE THESE

INSTRUCTIONS

For Household Use Only

LITHIUM-ION BATTERY

REPLACEMENT, SHAVER

DISPOSAL AND RECYCLING:

• For battery replacement send the entire, intact shaver unit to:

Wahl Annex 3001 North Locust, P.O. Box 578, Sterling, IL 61081

• Do not attempt to remove the battery. Lithium-Ion batteries can

explode, catch fire, and/or cause burns if disassembled, damaged,

or exposed to water or high temperatures.

• If you choose not to replace the battery, the entire, intact shaver

unit must be disposed. Do not attempt to remove the battery for

disposal. Lithium-Ion batteries may be subject to local disposal

regulations. Many locations prohibit disposal in standard waste

receptacles. Check your local laws and regulations.

• For recycling contact a government recycling agency, waste

disposal service, retailer, or visit online recycling sources, such as

www.batteryrecycling.com or www.rbrc.org.

IMPORTANT SAFEGUARDS

When using your electrical appliance, basic precautions

should always be followed, including the following:

READ ALL INSTRUCTIONS AND SAFEGUARDS

BEFORE USING THIS APPLIANCE.

DANGER

To reduce the risk of death or injury by electric

shock:

1. Do not reach for an appliance that is plugged in and

has fallen into water. Unplug immediately from the

outlet. Note: Some electrical parts inside the shaver

are electrically live, even with the switch “off.”

2. Always unplug this appliance before cleaning.

3. Unplug the charger before using appliance. Appliance will

not operate when plugged in.

4. Except when charging, always unplug this appliance from

the electrical outlet immediately after using.

5. Do not place or store appliance where it can fall or be

pulled into a tub or sink. Do not place in or drop into water

or other liquid.

WARNING

To reduce the risk of burns, electrical shock or injury

to persons:

1. This appliance can be used by children aged from 14

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction, by a person responsible for their safety,

concerning the use of the appliance in a safe way and

understand the hazards involved. Children shall not play

with the appliance. Cleaning and user maintenance shall

TIPS FOR FIRST-TIME USERS

If you are using an electric shaver for the first time, your skin will

probably need to condition itself to this new shaving technique.

Start on the easiest part of the face first, usually the smooth portion

of the face below the ear. Shave with a light touch and use your

Wahl Shaver exclusively for three to four weeks, or longer if you

have sensitive skin or if your whiskers grow at different angles in

certain areas. Initially your shaves may not be as close as you

would like, and your skin may become a bit irritated. But if you

stick with it, you will eventually get great shaves.

If you go several days without shaving and your beard gets a bit

long, use the pop-up trimmer to go over your beard, catching all

the longer hairs and setting up the remaining stubble for the foil to

shave smooth and clean.

If you have been using another type of electric shaver before, there

may also be a period of conditioning prior to receiving maximum

results.

FEATURES

1. Socket

2. On/Off Switch

3. Cutter Bar Assembly

4. Flex Foil Head

5. Long-Hair Pop-Up Trimmer

6. Long-Hair Trimmer Switch

7. Shaver Head Release Button

8. Foil Guard

9. Charger Contacts

10. Spring Clips

Note: Remove LED label before first use.

CHARGING OPERATION

The shaver cannot be overcharged, so you may charge it as often

as desired. However, periodic recharging of the shaver, rather than

continuous recharging, will prolong battery life.

MODELS WITH 1 LED

Charge when shaver seems to lose power or run slower. The

charging LED will light up while charging. LED will turn off when

charging is complete.

MODELS WITH 2 LEDS

The red LED will flash for one second when turning off the shaver

when it is time to charge (below 10%).

The blue LED will light up while charging. LED will turn off when

charging is complete.

MODELS WITH 5 LEDS

The LED meter will show the amount of charge left on the shaver.

The fewer lights that are lit, the lower the charge on the battery is.

The red LED will flash for one second when turning off the shaver

when it is time to charge (below 10%).

While charging, the LED meter will show the progression of

charging. All LEDs will turn off when charging is complete.

LONG-HAIR TRIMMER

OPERATION

Your shaver features a special

long-hair trimmer located on

the back of the shaver which

telescopes up from the foil head

for precise and easy trimming of

sideburns, beards or mustaches,

and for removing long hairs from

the neck. And, as mentioned earlier, it can be used to “knock down”

heavy beard growth prior to shaving with the foil.

To use, remove Foil Guard and simply push the Long-Hair Trimmer

Switch in an upward motion until trimmer slides (clicks) into

position. Push On/Off Switch. Then begin trimming/styling.

CLEANING AND

MAINTENANCE

SHAVER HEAD CARE

For maximum performance, we

recommend you clean your shaver

after every few shaves. Any servicing,

other than replacement of foil head and

cutter bars, should be performed by an

authorized Wahl Shaver Service Center or

Wahl Clipper Corporation (see Warranty

for mailing address information).

To clean, turn shaver “OFF” and remove

the foil head by pushing the

shaver head release buttons

on the sides of the shaver and

lifting the foil head upward.

Lightly tap the open side of the

foil head on a hard surface to

remove the majority of loose

stubble particles. Be careful not to tap foil.

For easy cleaning, you may rinse your shaver with water. While the

foils can be rinsed, we recommed removing the foil head, and rinsing

the cutter bars. This will allow any hairs still on the cutter bars to be

washed away. Leaving the foil head on while rinsing makes in more

difficult for hairs to be washed clean.

TO REMOVE CUTTER BAR

Turn shaver off. Remove the foil head

and, holding the shaver in one hand,

gently pull up on cutter bar. Be sure your

thumb and first finger are positioned at

each end of the cutter bar.

WARNING: Handle cutting components

with care to avoid personal injury.

NOTE: If you do not hold the cutter bar as

shown, brushing the blades could result in

damage to the assembly.

When the foil head and cutter bars are

removed from the shaver, an alternate

cleaning method is to rinse them under

running water. Simply let them air dry.

After cleaning, replace the cutter bars by

pressing down gently. Carefully replace

the foil head, snapping it into place.

From time to time, depending on the density of your beard, you will

need to replace the cutters and foils. If you notice that it is taking

you longer to shave, or if your face starts to feel some irritation, or

if the foil seems to become warm to the touch, it is probably time to

replace the cutters and foils. Replace the cutters and foils only with

WAHL parts (Yellow: 7045-100, Silver: 7045-400, Black Chrome:

7045-700).

CLEANING & OILING BLADES TRIMMER

BLADES

Clean with the included brush. For best results, put one or two

drops of Wahl Clipper Oil on

the blades only when necessary, or approximately once a month.

Motor bearings are permanently lubricated—do not attempt to oil.

When oiling your trimmer, turn the trimmer “ON - I,” hold the unit

with the blades facing DOWN and squeeze one or two drops of oil

onto the blades. Wipe off excess oil with soft cloth.

NOTICE—DO NOT OVER OIL!

Excessive oiling or application of liquids will cause damage if

allowed to seep back into motor.

FOIL & BLADE CARE

Trimmer blades have precision-hardened, ground and lapped

cutting teeth. Foils, cutter bar, and blades should be handled

carefully and never bumped or used to cut dirty or abrasive

material.

STORAGE

Before storing your trimmer, use the cleaning brush to whisk any

loose hairs from the unit, foils, cutter bar, and blades. Store unit in

such a manner so that blades are protected from damage.

When the shaver is not in use, the shaver foil/blade guard

attachment should be in place to protect the blades.

This appliance should be stored in a manner where it is not

subjected to Crushing, Heating above 100°C (212°F), or

Incineration.

CORD CARE

The cord should not be used to pull the shaver. Freedom of

movement needs to be maintained. Care should be used to keep

the cord untwisted and undamaged.

When stored, the cord should be coiled and replaced neatly in its

original package or storage pouch.

grooming.wahl.com

Operating Instructions for

7061 Series Shavers

Instrucciones de Funcionamiento para

Rasuradoras Serie 7061

WET/DRY USE

NOTE: Do not submerge shaver in more than 3 feet of water or for

more than 30 minutes to prevent water ingress into the electronics.

Warranty is void if shaver is submerged beyond these limitations.

The Wahl shaver is designed to be water resistant and shower

proof (IPX7). This lets you use your Wahl shaver in the shower or

at the sink without worry and makes it easy to clean under running

water.

NOTE: The shaver is for wet/dry use. The shaver will not run while

the cord is attached for safety.

SERVICE AND REPAIR

If you have problems with your shaver, send it prepaid

with a note explaining the problem to:

Wahl Clipper Corporation

Attn: Repair Department

3001 Locust Street

Sterling, IL 61081

Telephone (800) 767-9245

For products purchased outside the United States, contact your distributor.

If for any reason within 60 days of purchase of your Wahl

®

shaver you are not satisfied with your shaver and would like

a refund, just return your shaver, together with the sales

receipt, to the retailer from whom you purchased it. Wahl will

reimburse all retailers who accept shavers within 60 days of

purchase. If you have any questions regarding this money-

back guarantee, please call 1-800-767-9245 in the United

States.

60 Day Money Back Guarantee!

© 2016 Wahl Clipper Corporation

Part No. 91590

Printed in U.S.A.

For more information or Product Registration, visit grooming.wahl.com

5-YEAR LIMITED WARRANTY

Valid in U.S.A. Only

If your Wahl product fails to operate satisfactorily within five

(5) years from the date of original purchase or receipt as a gift,

Wahl will, at our option, repair or replace it and return it to you

FREE OF CHARGE. Do not return this product to store where

purchased. Products needing repair under this warranty should

be returned with postage prepaid to:

Wahl Clipper Corp.

Attn: Repair Department

3001 Locust Street

Sterling, Illinois 61081

Include a note describing the defect and the date of original

purchase or receipt as a gift (if in warranty). Products out of

warranty will be repaired at our standard repair charges.

This warranty is void and no repair or replacement will be made

under this warranty or otherwise if: (1) The product is modified

in any manner or repaired by anyone other than Wahl Clipper

Corporation or Wahl authorized service center. (2) The product

has been used commercially or subjected to unreasonable use.

This warranty gives you specific legal rights and you may

also have other rights which may vary from state to state. No

other written express warranty is given. Any implied warranty,

including any warranty of merchantability which may arise from

purchase or use, is limited to the year period provided in this

express warranty. Some states may not allow such limitation,

so it may not apply to you. No responsibility is assumed for

incidental or consequential damages of any type, or for the use

of unauthorized attachments. Some states may not allow the

exclusion or limitation of incidental or consequential damages, so

the limitation or exclusion may not apply to you. Outside U.S.A.,

check with store for Wahl authorized distributor’s warranty.

This symbol, located on the shaver,

represents that the shaver is suitable

for use in the bath and shower.

not be made by children without supervision.

2. Use this appliance only for its intended use as described

in this manual. Do not use attachments not recommended

by the manufacturer.

3. Never operate this appliance if it has a damaged cord or

plug, if it is not working properly, or if it has been dropped

or damaged. Return the appliance to Wahl Clipper

Corporation for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never operate the appliance with the air openings blocked

or while on a soft combustible surface, such as a bed or

couch, where air openings may be blocked. Keep the air

openings (if any) free from lint, hair or the like.

6. Do not use outdoors or operate where aerosol (spray)

products are being used or where oxygen is being

administered.

7. Never drop or insert any object into any opening.

8. Do not use this appliance with a damaged or broken foils,

as injury may occur. Before use, make certain blades are

undamaged.

9. During use, do not place or leave the appliance where

it is expected to be subject to damage by an animal, or

exposed to weather.

10. To disconnect, turn all controls to “OFF,” then remove

plug or charger from outlet.

11. Turn all controls to “OFF” before placing on or removing

foil head, cutter bar, or foil guard.

12. Do not crush, disassemble, heat above 100°C (212°F),

or incinerate the appliance, due to risk of fire, explosion,

or burns.

13. Use only the charger supplied by the manufacturer to

recharge.

14. This charger is intended to be correctly orientated in a

SHAVING PROCEDURES FOR

FAST, CLOSE SHAVES

We suggest that you thoroughly cleanse and

completely dry your skin prior to shaving.

For maximum speed and efficiency, hold the

shaver so that both screens are in contact

with the skin. When shaving the upper lip

or neck, hold shaver so that the uppermost

screen is in contact with skin.

Shave both with and against the grain of the

beard, and stretch the skin taut in the path of the shaver. Guide the

dual foil heads gently back and forth, primarily against the grain of

the beard. Do not press screen heads hard against face. Heavy

scrubbing action with the shaver could damage the foil and will not

result in a closer shave.

Always replace the foil guard to protect the delicate dual foil heads

when shaver is off.

SHAVING HEAVY BEARD

GROWTH

Begin shaving in a less dense area of the beard. Move the shaver

in a circular motion on a small area of the face (this picks up the

hairs that grow in all directions). When you see that this small area

is shaved clean, gradually move into a new

area while still using the circular motion.

Continue this motion, one small section at a

time, until entire face is shaved.

If your beard has more than 3 days of

growth, use the pop-up Long-Hair Trimmer

to cut the beard down to about a one-day

growth before using the shaver foil.

1 & 9

7

3

6

10

4

2

8

5

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Wahl 07061-100 LifeProof Scheerapparaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Wahl. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Wahl 07061-100 LifeProof Scheerapparaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Wahl Scheerapparaten
Meer handleidingen voor Scheerapparaten

Veelgestelde vragen over Wahl 07061-100 LifeProof Scheerapparaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.