Handleiding Waring Commercial MX1500XTS Blender

Handleiding

8 9

RESTORING FACTORY-SET BEVERAGE STATIONS

1. To restore factory-set default beverage stations, press both

Speed Up

and Speed Down buttons. LCD will prompt ADD NEW

PROGRAM.

2. Press

button.LCDwillpromptRESTOREDEFAULTPROGRAMS.

3. Press

button to confirm and save. The LCD will display the logo for

3 seconds.

4. The unit will return to standby mode and the LCD will prompt PRESS

ANYBUTTONTOBLEND.

NOTE: The Stop

key will abort this process at any point before

restoring default programs is confirmed.

DRINK COUNTER

Your reprogrammable blenders are equipped with a drink counter to keep

track of daily drink totals and total drink counts for your machine. To display

the counts, hold program buttons

&

simultaneously for 3 seconds.

Your display will read:

DAILYCOUNTXXXX

TTLCOUNTXXXXX

DailyCountwilldisplaythenumbersofdrinksmixedperday.TotalCount

is the accumulation of all drinks made since first use of the blender.

The Daily Count can be reset by holding in program buttons

&

simultaneouslyfor3secondsthen,pressing(ON/OFF)buttonfor3seconds.

DailyCountwillresettozeroandTotalCountwillremainunchanged.

IfTotalCountneedstobereset,callyournearestWaringauthorizedservice

facility for information.

NOTE: Use of the PULSE features will not add to the daily or total drink

counts.

RESETTING THERMAL PROTECTION

• Yourblenderisequippedwithanautomaticresetfunctiontoprotectthe

motor from overheating.

• Ifyoublenderstopsrunningunderheavyuse,turnthepowerswitchto

 Offandunplugthepowercord.Emptytheblendercontainerofall

its contents and allow between 5 and 30 minutes for the motor to

cool down.

• Plugthepowercordbackintotheoutletandcontinueblending.

• Ifyourblenderdoesnotfunctionproperlyfollowingthisprocedure,

discontinue use and contact a certified Waring Customer Service Center.

IMPORTANT - HOT BLENDING INSTRUCTIONS

Tominimizethepossibilityofbeingscaldedwhenblendinghotmaterials,

the following precautions and procedure must be observed.

• Hotmaterialsarethosethatare100°F(38°C)orhotter.

• Limittheamountofmaterialsprocessedto1pint.

• Completelyremovethecenterportionofthetwo-piececontainerlidbefore

startingmotor(thiswillallowventingoftherapidlyheatedandexpanded

air inside the container when blender is running).

• Alwaysstartblendingonlowestspeedsetting,andthenprogressto

desired speed.

• Neverstanddirectlyoverblenderwhenitisbeingstartedorwhileit

is running.

SOUND ENCLOSURE (for MX1500XTX Version)

YourMX1500XTX/MX1500XTP/MX1500XTSblenderisequippedwitha

heavy-duty polycarbonate sound enclosure to reduce noise level while

blending. This sound enclosure is removable and dishwasher safe.

To remove the sound enclosure, follow these steps:

 1. Opensoundenclosureandremoveblendercontainer.

2. Remove front portion of sound enclosure by disengaging both sides at

the pivot point.

3. Remove rubber jar pad.

4. Remove 3 screws from blender base and remove sound enclosure.

NOTE: To replace sound enclosure, follow above steps in reverse.

TURNING OFF YOUR BLENDER

Whether your blender is in standby mode, new programming mode, or

themotorisrunning,pressingtheOn/Off

button will stop the unit

from running and will turn the power off. The LCD display will turn off.

NOTE:Allprogramsandcurrentsettingswillberestorednexttimeyou

turn unit on.

CLEANING AND SANITIZING INSTRUCTIONS

THEBLENDERCONTAINERMUSTBECLEANEDANDDRIEDAFTEREACH

USEACCORDINGTOTHEFOLLOWINGINSTRUCTIONS.FAILURETODO

SOMAYALLOWRESIDUESOFPROCESSEDMATERIALTOCOLLECTON

THEINTERNALSEALSOFTHEBLADEASSEMBLY,RENDERINGTHEM

INEFFECTIVE.

• Wash,rinse,sanitizeanddrycontainerpriortoinitialuseandwheneverit

will not be used again within a period of one hour.

• Washandrinsecontaineraftereachuse.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Waring Commercial MX1500XTS Blender. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Waring Commercial. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Waring Commercial MX1500XTS Blender in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Waring Commercial Blenders
Meer handleidingen voor Blenders

Veelgestelde vragen over Waring Commercial MX1500XTS Blender

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Waring Commercial WCG75 Blender

Handleiding

Waring Commercial MX1050XTS Blender

Handleiding

Waring Commercial MX1500XTX Blender

Handleiding

Waring Commercial MMB160E/K Blender

Handleiding

Waring Commercial MMB150E/K Blender

Handleiding

Waring Commercial MX1500XTP Blender

Handleiding

Waring Commercial MMB145E/K Blender

Handleiding

Waring Commercial MX1050XTP Blender

Gerelateerde categorieën