Hearing Protection
Fit Checking
Choose smallest size that provides good seal and secure t, but large enough that the outer ange seal ear
canal at ear canal entrance. One quick and easy t check is the pump test. The seal can be tested by gently
pumping the plug in and out of the ear canal, while the rocker switch is in the Closed Mode position. When
a proper acoustic/pneumatic seal is present, the pumping motion will cause the pressure changes in the ear
which the wearer should be able to detect. They will be much less noticeable or totally absent while the rocker
switch is in the Open Mode position. If no difference can be detected between the Open/Closed Modes the plug
is probably not sealing the ear. Additionally, the users voice should sound louder and deeper when they speak
or hum.
The 3M Combat Arms Earplugs - Generation 4.1 are available in three sizes. Consult with your Hearing
Conservation Program Manager, health care provider or the manufacturer for advice on selecting the best earplug
size to properly t your ear canal.
The earplugs contain a housing assembly featuring a rocker switch with a tiny hole and CAE on the lower tab
and 3M logo on the upper tab. When the tab featuring the 3M logo is pressed (see Fig. 1) the device acts as
a conventional earplug providing protection against steady noise arising from aircraft, vehicles, generator and
watercraft, for example. This is called the Closed Mode. Notice that sounds are quieter in this mode. When the tab
featuring the CAE and tiny hole marking is pressed (see Fig. 2) the device allows some sound to pass through,
while still helping protect hearing from impulse noise such as weapons re. This is called the Open Mode. The
Open Mode may assist the user with improved situational awareness.
Step 1. Ensure that the plug labeled with an “L” is used for the Left ear and the plug with an “R” is used
on the Right ear. Ensure the retainer is oriented generally as shown relative to the rocker switch.
Step 2. Insert the plug into the ear canal while pulling the ear outward and upward with the opposite hand.
Ensure the rocker switch is in a vertical position. (see Fig. 3)
Step 3. Use index nger to push and bend the retainer into the concha to help ensure the earplug is seated
securely. (see Fig. 4)
Step 4. If properly inserted, the retainer should be fully secured in the concha and not protruding out of
the ear at any point. (see Fig. 5)
Step 5. If the retainer or earplug doesn’t t properly (see Fig. 6 & 7) it can be removed and reinserted.
Removing Earplugs
For greater comfort twist the earplug gently to break the seal before removing it from the ear canal.
Caution: Rapid removal may damage the ear. It is not recommended to remove the earplugs by
pulling the cord. (see Fig. 8)
Cleaning and Disinfecting
These earplugs are reusable and should be cleaned with mild soap and warm water only. Allow to dry at
room temperature. Do not immerse the rocker switch assembly in water as this can clog the lter. Do not
use alcohol or other disinfectant as these may damage the earplugs. Do not use heat to dry the product.
Hard plastic parts may be wiped clean. Discard the product immediately if there is any sign of damage.
Fitting Instructions
The power to protect your world.
SM
© 2014 3M Company. 3M and the E-A-R logo are trademarks of, and The Power To Protect Your World is a service mark of 3M Company,
used under license in Canada. Peltor is a trademark of 3M Svenska AB, used under license in Canada.
For more information visit www.3M.com/hearing.
Earplugs
1. Always be sure that the complete product is:
a) Suitable for the application b) Fitted correctly c) Worn during all periods of exposure d) Replaced when necessary
2. This product may be adversely affected by certain chemical substances. Further information should be obtained from the
manufacturer.
3. Earplugs tted with a connecting cord should not be used where there is a risk that the cord may be caught up during use.
4. When used in the Open Mode against continuous noise, the product may not offer adequate protection in all operating
environments which may lead to noise induced hearing loss.
5. Although test data from ISL laboratory for peak noise reduction shows that the product offers increasing level of protection
against peak impulse noise up to 190 dB peak, it is recommended the product should be restricted to a maximum external
level of 160 dB in order to ensure the level effective to the ear remains below the Peak Exposure Limit Value of 140 dB.
3M
TM
Combat Arms
TM
6. In the unlikely event of the earplug tip becoming lodged in the ear canal, seek medical attention.
7. Failure to follow all instructions on the use of these personal protection products and/or failure to properly wear the complete product
during all periods of exposure may adversely affect the wearer’s health, lead to severe or life threatening illness or permanent disability.
8. When individuals are ring weapons and exposed to impulsive sounds, the severity of exposure is inuenced by the weapon,
ammunition, number of rounds red, and numerous other variables. Proper selection, t, use, and care of the hearing protector are
very important. All of these factors make it difcult to predict the required and/or actual protection obtained. Regardless of the hearing
protector being worn, the user should be alert to his or her own hearing. If during or after an exposure, tinnitus (ringing or buzzing in
the ears) is heard or the user’s hearing seems mufed or dulled, or for any other reason the user suspects a hearing problem, the t,
condition, and adequacy of the protector should be carefully checked and/or a more protective device or combination of devices (such
as earmuffs and earplugs together) should be worn. For those exposed to weapons re on a regular basis, periodic hearing evaluations
are advised.
3M
TM
Combat Arms
TM
Earplugs - Generation 4.1
FIG. 1 FIG. 2
FIG. 3 FIG. 4
FIG. 5 FIG. 6
FIG. 7
FIG. 8
Praat mee over dit product
Laat hier weten wat jij vindt van de 3M Combat Arms Oordoppen. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.