Handleiding Adler AD 4703 Snijmachine

Handleiding voor je Adler AD 4703 Snijmachine nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

3
SAFETY CONDITIONS. IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions differ if the device is used for commercial purposes.
1. Before using the device, read the operating manual and follow the instructions contained
therein. The manufacturer is not liable for damages caused by the use of the device
contrary to its intended use or improper operation.
2. The appliance is intended for domestic use only. Do not use for other purposes not in
accordance with its intended purpose.
3. The device should only be connected to a 220-240V ~ 50 / 60Hz socket.
4. For additional protection, it is advisable to install a residual current device (RCD) in the
electrical circuit with a rated residual current not exceeding 30 mA . A specialist electrician
should be consulted in this regard.
5 . Be careful when using near children. Do not let children play with the product. Do not let
children or people unfamiliar with the device use it unsupervised.
6 . WARNING: This appliance may be used by children over 8 years of age and persons
with reduced physical, sensory or mental abilities or persons with no experience or
knowledge of the appliance only under the supervision of a person responsible for their
safety, or if they have been instructed in the safe use of the appliance and are aware of the
risks associated with its operation. Children should not play with the device. Cleaning and
user maintenance should not be performed by children, unless they are 8 years old and
under supervision.
7 . Always gently pull the plug out of the socket after using the product, holding it with your
hand. Never pull on the power cord !!!
8 . Never leave the product connected to a power source unattended. Even if use is
interrupted for a short time, disconnect it from the mains . About D isconnect power before
assembly, disassembly or cleaning.
9 . Do not immerse the cable, plug and the entire device in water or any other liquid. Do not
expose the device to weather conditions (rain, sun, etc.) or use it in high humidity conditions
(bathrooms, damp mobile homes).
10 . Periodically check the condition of the power cord. If the power cord is damaged, the
product must be sent to an authorized service center for replacement to avoid any
hazardous situations.
1 1 . Never use the product with a damaged power cord if it has been dropped or damaged
in any way, or if it is not working properly. Do not try to repair a damaged product yourself as
this may result in electric shock. Always take the damaged device to an authorized service
center for repair. All repairs may only be performed by authorized service technicians.
Repair performed incorrectly may result in dangerous situations for the user.
1 2 . Never place the product on or near hot or warm surfaces or kitchen appliances, such
as an electric oven or gas burner.
1 3 . Never use the product near flammable materials.
1 4 . The power cord must not hang over the edge of the table or touch hot surfaces.
ENGLISH
Download de handleiding in het Nederlands en/of Engels (PDF, 3.44 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Adler AD 4703 Snijmachine vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Adler AD 4703 Snijmachine?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Adler AD 4703 Snijmachine. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Adler AD 4703 Snijmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Adler. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Adler AD 4703 Snijmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Adler
Model AD 4703
Categorie Snijmachines
Bestandstype PDF
Bestandsgrootte 3.44 MB

Alle handleidingen voor Adler Snijmachines
Meer handleidingen voor Snijmachines

Handleiding Adler AD 4703 Snijmachine

Gerelateerde producten

Gerelateerde categorieën