Handleiding Anko 43464944 Riley Wave Lamp

Handleiding

RILEY WAVE TABLE LAMP

Item no.: WSN22T065A

IMPORTANT SAFETY INSTRUCTIONS:

The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It

is important to read all of these instructions carefully before using the product, and to save them for future reference or

new users.

1. This product must only be used as intended in accordance with the enclosed operating instructions

2. Do not carry the appliance by the mains cable or pull the cable to remove the plug from the socket.

3.

4.

5.

6. Avoid positioning the where the power cable might be accidentally trapped or damaged.

7. Keep the lamp and cable away from sources of heat, sharp objects or anything that may cause damage.

Ensure the lamp is switched OFF before connecting to the mains power supply.

8.

9. Be aware that some surfaces may become hot. Do not touch and supervise others accordingly.

10. This product has not been designed for use by children.

11. Children should be closely supervised at all times when they are near any electrical appliance.

12. To protect against electric shock, never allow the lamp, the mains cable or

plug to come into contact with water or any

other liquid.

13. Never reach for any that has fallen into water. Switch off the power supp

ly at the mains immediately and unplug.

Do not re-use until the product has been inspected and approved by a qualified electrician.

14. Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains

supply connections.

15.

16.

To disconnect, first ensure that all controls are in the OFF position, then remove the plug from the electricity supply.

17.

Where relevant keep all ventilation

slots, filters, etc. uncovered and clear of debri

s. Never drop or insert objects into the

openings.

Do not use outdoors. This

appliance

has been designed for domestic indoor use only.

ADDITIONAL SAFETY PRECAUTIONS FOR LIGHTING:

1. Carefully read all instructions for the assembly and use of this product before connecting to an electricity supply.

2. Use only the recommended bulb rating, as detailed on the lamp holder and / or label.

3. Never use a bulb that is rated more than the recommended capacity.

4. Light bulbs become very hot in s

econds. Do not attempt to touch the bulb while the lamp is lit and supervise others

accordingly.

5.

6. Ensure the new bulb is secure in the holder before reconnecting to the power supply.

7. If in doubt, consult a qualified electrician.

Product Specification:

●

Rated Voltage: 220-240V ~ 50Hz

Bulb requires:

Max 25W E27 Edison Screw

(Not Included)

CAUTION: Electric shock hazard. The external flexible cable, plug or the switch of this lamp cannot be replaced. If any

of these parts are damaged, disconnect from mains power. The lamp should be destroyed.

●

hot surfaces

Before cleaning or replacing a defective bulb, switch off the lamp and unplug from the mains socket. Allow

the bulb to cool for at least 10 minutes before touching it and making the change.

INSTRUCTIONS FOR COMPLETE INSTALLATION:

1. Caution: Assemble the lamp completely before connecting to the electricity supply.

2. As per the diagram , gently push the lamp shade (B) from the inside until it flips into correct position.

3. Once shade is in correct position continue with instructions.

4. Loosen the Socket Ring (C).

5. Install the Lamp Shade (B) to the Lamp Holder and lock the Socket Ring (C).

6. Install the bulb-Max 25W E27 (not included) into the lamp holder.

7. Check to ensure that all the components have been assembled correctly.

8. Connect to the mains supply.

If the lamp stops unexpectedly or appears to malfunction, unplug from the mains and stop using immediately. Seek

professional advice to rectify the fault or make repairs.

lamp

lamp

Switch off the power supply or unplug from the mains socket when not in use, before cleaning or changing accessories.

7 – 9W LED recommended for medium brightness

1. 2.

B

T: 70166170

K: 43464944

12 Month Warranty

Thank you for your purchase.

Your new product is warrantied to be free from defects in materials and

workmanship for the period stated above, from the date of purchase, provided

that the product is used in accordance with accompanying recommendations or

instructions where provided. This warranty is in addition to your rights under the

Australian Consumer Law.

For New Zealand customers, this warranty is in addition to statutory rights

observed under New Zealand legislation.

We will provide you with your choice of a refund, repair (where possible) or

exchange (availability dependent) for this product if it becomes defective within

the warranty period. The business will bear the reasonable expense of claiming

the warranty.

This warranty will no longer apply where the defect is a result of alteration,

accident, misuse, abuse or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service

Centre as listed below, for the entity you purchased this product from, for any di-

culties with your product. Warranty claims and claims for expense incurred

in returning this product can be addressed to the respective Customer Service

Centre.

Our goods come with guarantees that cannot be excluded under the Australian

Consumer Law. You are entitled to a replacement or refund for a major failure

and compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to

be of acceptable quality and the failure does not amount to a major failure.

Contact for Kmart purchases

Kmart Australia Ltd.

C/- Customer Service Centre

690 Springvale Road,

Mulgrave Vic 3170

Customer Service: 1800 124 125

(Australia) or 0800 945 995

(New Zealand) or via

Customer Help at kmart.com.au

Target Australia Pty Ltd

C/- Customer Service Centre

2 Kendall Street, Williams Landing,

Vic, 3027

Customer Service: 1300 753 567

or via Customer Help at

target.com.au/help/contact-us

Contact for Target purchases

B

C

A

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Anko 43464944 Riley Wave Lamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Anko. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Anko 43464944 Riley Wave Lamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Anko Lampen
Meer handleidingen voor Lampen

Veelgestelde vragen over Anko 43464944 Riley Wave Lamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Anko 43455706 Amiri Lamp

Handleiding

Anko 43455737 Gigi Lamp

Handleiding

Anko 43464999 Riley Wave Lamp

Handleiding

Leitmotiv LM2221CH Lamp

Handleiding

Leitmotiv LM2124WG Lamp

Handleiding

Leitmotiv LM2075GD Lamp

Handleiding

Leitmotiv LM2234BL Lamp

Handleiding

Leitmotiv LM2224GR Lamp

Gerelateerde categorieën