Handleiding Armytek Prime A2 Zaklamp

Handleiding

Prime

Specifications

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

USER MANUAL

FLASHLIGHTS IN THE WORLD

THE MOST TECHNICALLY ADVANCED

Model

Prime A1

Prime A2

Prime C1

Prime C2

LED / Optics

Cree XM-L2 / TIR

Brightness stabilization type

FULL stabilization (constant brightness)**

Light output, LED / OTF lumens*

450 / 370

620 / 500

500 / 400

1200 / 1050

Peak beam intensity, candelas

3050

4250

3100

8800

Hotspot/spill

20°/ 80°

Beam distance*

110 meters

130 meters

111 meters

188 meters

Hotspot diameter at 100 meters

35 meters

Modes and runtimes (measured for

Sanyo Eneloop AA 2000 mAh /

Armytek CR123A 1500 mAh / Armytek

18650 Li-Ion 3100 mAh to the

decrease to 10% of initial brightness)

Firefly1: 0.15 lm / 90d

Firefly2: 1.7 lm / 200h

Main1: 10 lm / 25h

Main2: 70 lm / 3h

Main3: 210 lm / 1.2h

Max: 370 lm / 30min

Firefly1: 0.15 lm / 130d

Firefly2: 1.7 lm / 300h

Main1: 10 lm / 48h

Main2: 70 lm / 9.5h

Main3: 210 lm / 2.5h

Max: 500 lm / 1h

Firefly1: 0.15 lm / 130d

Firefly2: 1.7 lm / 300h

Main1: 10 lm / 40h

Main2: 70 lm / 5h

Main3: 210 lm / 2h

Max: 400 lm / 35min

Firefly1: 0.2 lm / 100d

Firefly2: 2 lm / 18d

Main1: 35 lm / 48h

Main2: 200 lm / 9h

Main3: 420 lm / 3.8h

Max: 1050 lm / 1.5h

Power source

1xAA /

1x14500 Li-Ion

2xAA

1x18350 Li-Ion /

1xR123 Li-Ion/1xСR123A

1x18650 Li-Ion /

2xCR123A/2xR123 Li-Ion

Size

Length 98mm,

body diameter 24.5mm

Length 144mm,

body diameter 24.5mm

Length 82mm,

body diameter 24.5mm

Length 113mm,

body diameter 24.5mm

Weight (w/o batteries)

70g

92g

52g

59g

We recommend to use Sanyo Eneloop AA rechargeable batteries instead of ordinary AA batteries to obtain higher brightness

and longer runtimes. We highly recommend NOT to use CR123A batteries as a power source for often and continuous

flashlight’s operation. Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your

needs applying in them components made in the USA and Japan. .10 years no-hassle warranty

§ Superb light of amazing constant brightness due to powerful electronics and active temperature control without timers

§ Efficient TIR-optics and no “tunnel vision” effect even after continuous use

§ Warning Indication of low battery level and high temperature

§ Side switch for comfortable one-hand operation and easy modes switching

§ Ultra low current drain in OFF-state - more than 25 years

§ Removable clip, comfortable holster and possibility of tail-stand for multipurpose use

§ Compact and light-weight flashlight of guaranteed durability stands up harsh impacts and falling from 10 meters

§ Total protection from water, dirt and dust penetration - flashlight continues to work even at the depth of 10 meters

* Light outputs for flashlights with Warm light are about 7% less, beam distances are about 3% less.

** C2: in Max mode stabilization is DIGITAL, in all other modes - FULL.

Warnings

Armytek Optoelectronics Inc. shall not be liable for any harm done to the user if it

was caused by improper use of the product.

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less

capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a turned-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

Care and Storage

It is recommended to clean the threads and O-rings off dirt and old grease. Remember that secure protection from water and dust

cannot be provided by worn out sealing. And fouling as well as lack of lubricant cause fast wear-out of threads and sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the

ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow applied liquid to get inside the flashlight or tailcap as it

can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of

automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts

as often as required, even if it is more than twice a year.

Service and Warranty

Specifications are subject to change without notice.

Armytek provides free warranty repair for 10 years from the purchase.

Warranty doesn't cover damage caused by:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

Armytek Optoelectronics Inc.

Web: www.armytek.com Email: [email protected]

Address: 67 Vandervoort Dr, Richmond Hill, Ontario, L4E 0C7, Canada

C2 only: With ambient temperature +25°C the flashlight delivers light in Maximum mode for about 8-10 minutes and then the

brightness steps down to the Main3 mode. 40-60 seconds afterwards the brightness increases to the Maximum mode again. This

stepping goes cyclically to maintain the user's safety and the flashlight's functionality. In the conditions of good air-cooling the

flashlight delivers constant light even in Maximum mode. It does not use timers, but real active temperature measurements.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Armytek Prime A2 Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Armytek. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Armytek Prime A2 Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Armytek Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Armytek Prime A2 Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.