Handleiding Arrow GT20DT Lijmpistool

Handleiding

2 3

Class II Tool

Outil de classe II

Herramienta clase II

1. Do not touch heated nozzle area of glue gun

or melted glue. Touching any heated portions of the

product may result in personal injury, such as a burn.

2. Keep work area clean and keep electrical

contacts clear of debris. Work environment

should be clean, dry, well lit and clear of

ammable materials. Cluttered, dark areas and

ammable materials may result in a risk of re, electric

shock or personal injury.

3. Keep children and bystanders away while

operating the tool. Distractions can cause you to lose

control.

4. Always use safety glasses. Following this rule will

reduce the risk of eye injury.

5. Do not harm the cord. Never use the cord for

carrying, pulling or unplugging the glue gun

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

6. Glue gun tool plug must match the outlet.

Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded)

glue gun tools. Modifying plug and failure to use

proper outlet increases risk of electric shock.

To avoid injury and misuse, please read the

instruction manual before operation.

Pour éviter tout risque de blessures et une

mauvaise utilisation, prière de lire le manuel

d’utilisation avant l’utilisation.

A fin de evitar lesiones y mal uso, lea el

manual de instrucciones antes de usar

la herramienta.

Obey all safety messages that follow this

symbol to avoid possible injury or death.

Respecter tous les messages de sécurité

suivant ce symbole pour éviter tout risque de

blessures ou de décès.

Observe todos los mensajes de seguridad

que aparecen junto a este símbolo para

evitar posibles lesiones o la muerte.

Always wear safety glasses when operating

the tool.

Toujours porter des lunettes de sécurité en

utilisant l’outil.

Siempre use anteojos de seguridad cuando

utilice esta herramienta.

WARNING When using electric tools, basic safety precautions should always

be followed to reduce the risk of fire, electrical shock and personal injury.

CAUTION: Read Safety Rules and Operating Instructions Carefully.

READ ALL SAFETY INSTRUCTIONS:

7. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

8. Disconnect tools when not in use.

9. Do not touch the glue stick or trigger except to

dispense glue. Inserting the glue stick into the glue gun

using too much force can cause hot glue to unexpectedly

discharge from the nozzle. Following this rule may reduce

the risk of accidental glue discharge.

10. Do not expose this tool to rain or wet conditions.

Water entering a corded electric tool will increase the risk

of electric shock.

11. When not in use, the tool should be stored indoors.

12. Store idle glue gun out of the reach of children,

and do not allow persons unfamiliar with the

tool or these instructions to operate the glue

gun. Electric tools are dangerous in the hands of untrained

users.

13. Do not pull glue sticks from gun. The feed

mechanism may become damaged or impaired. If you

desire to change types of glue, cut off protruding end of

glue stick and feed the remainder through with the new

type of glue stick.

ENGLISH

GENERAL TOOL SAFETY WARNINGS 3–4

DEFINITION OF SYMBOLS USED ON TOOL &

FUNCTIONAL DESCRIPTION 5

ASSEMBLY AND OPERATING INSTRUCTIONS 6–7

TOOL MAINTENANCE AND ACCESSORIES 8

WARRANTY 9

FRANÇAIS

GENERAL TOOL SAFETY WARNINGS 3–4

DEFINITION OF SYMBOLS USED ON TOOL &

FUNCTIONAL DESCRIPTION 5

ASSEMBLY AND OPERATING INSTRUCTIONS 6–7

TOOL MAINTENANCE AND ACCESSORIES 8

WARRANTY 9

ESPANOL

GENERAL TOOL SAFETY WARNINGS 3–4

DEFINITION OF SYMBOLS USED ON TOOL &

FUNCTIONAL DESCRIPTION 5

ASSEMBLY AND OPERATING INSTRUCTIONS 6–7

TOOL MAINTENANCE AND ACCESSORIES 8

WARRANTY 9

GENERAL TOOL SAFETY WARNINGSGT20DT

™

DUAL TEMP GLUE GUN

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Arrow GT20DT Lijmpistool. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Arrow. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Arrow GT20DT Lijmpistool in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Arrow Lijmpistolen
Meer handleidingen voor Lijmpistolen

Veelgestelde vragen over Arrow GT20DT Lijmpistool

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Lux 381194 Lijmpistool

Handleiding

FERM GGM1005 Lijmpistool

Handleiding

Vito VIBCPCQ20 Lijmpistool

Handleiding

Trotec PGGS 10‑20V Lijmpistool

Handleiding

Rapid BGX7 Lijmpistool

Handleiding

Trotec PGGS 10-3.7V Lijmpistool

Handleiding

Stickfast GX120 Lijmpistool

Handleiding

Parkside IAN 297748 Lijmpistool

Gerelateerde categorieën