Handleiding Asaklitt MF-H05 Zaklamp

Handleiding

GREAT BRITAIN • CUSTOMER SERVICE

tel: 020 8247 9300 e-mail: [email protected].uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

ENGLISH

1 2 3 2 5

6 7 8 9

4

10 11 1412 13

1516

Ver. 20171204

Rechargeable Head Torch

Art.no 36-6069 Model MF-H05

Please read theentire instruction manual before using theproduct and then

save it for future reference. We reserve theright for any errors in text or images

and any necessary changes made to technicaldata. If you have any questions

concerning technical problems please contact our Customer Services.

Safety

• Do not point thelight beam into anyone’seyes.

• Do not let children play with theproduct.

• Never charge thetorch in flammable environments or on flammable

surfaces.

• Only use therechargeable batteries provided with theproduct.

• Only use theprovided charger cable, connected to aUSB port, for

charging thetorch.

• Never use adefective chargercable.

• Never expose thebatteries to fire or high temperatures.

• Avoid contact with leaking batteries.

Product description

1. LEDlamp

2. Magnetic headband mounts (for LED lamp and battery pack)

3. Handlebar or pipe mount for worklightuse

4. Batterypack

5. Magnetic charger connection

6. Charging indicator

7. Magnetic charger lead connector

8. Chargercable

9. USBchargerplug

10. Batteries: Type18650 (2 ×)

11. Batterycover

12. Focusring

13. Battery pack and LED lamp magnetic mounts, used together with (2) or (3)

14. Powerswitch

Inserting the batteries

Head torch Work light

Bicycle headlight

Loosen and remove thelock knob (15).

Bendand open thering bracket so that you

can place it onto thehandlebars. Insert one

or several of therubber spacers (16) into

thering bracket to attain aperfect and tight

fit onto thehandlebars. Re-insert and tighten

thelocking knob, making sure thehandlebar

mount sits securely onto thehandlebars.

Care and maintenance

Clean thetorch using asoft, dampcloth.

Never use cleaning agents or other chemicals.

Responsible disposal

Remove thebattery cover (11) and insert

theincluded rechargeable 18650 type

batteries according to thebattery pack’s(4)

polarity markings. Note: Thebatteries are

connected in parallel and should all point

thesame direction when inserted into

thebattery holder. Pressthelid firmly onto

thebatterypack.

Charging the head torch

Thetorch has amagnetic charger connection for thechargercable. Thetorch

can only be charged using theincluded chargercable.

1. Connect thesupplied charger cable to aUSB charger.

2. Connect theother end of the charger cable to the magnetic charger

connection (5) on the battery pack. Thecharging indicator (6) shines

red while thetorch battery is charging. Whenthebattery is fully charged

theindicator will shinegreen.

3. Thebattery will need at least 10 hours to fully charge (applies when using

aUSB charger providing acharging current of 1A) thefirst time it is

charged. Charging using acomputer’s USB port will double thestandard

charge time as theamperage from it will belower.

4. Thecharge connection is held together magnetically, make sure that

thelead’s plug is positioned correctly. Note: Charging time can vary

depending on thetype of charge sourceused.

Use

Areas ofuse: Headtorch, worklight and bicycle headlight.

TheLED lamp and battery pack are held in place magnetically both

on theheadband and handlebar mount, or also on any ferrous metal

surfaces,e.g. ironandsteel.

1. Press thepower switch (14) to turn on thetorch. Select thedesired mode

by pressing thepower switch therequired number oftimes: high power

(350 lm) – low power (150 lm) –off.

2. Thetorch also has aboost-mode for increasing light intensity (450lm).

Toactivate boost-mode: Holdthepower switch down for about 4

seconds until light intensity powerfully increases. Boost-mode lasts for

about 60 seconds and then returns to high-powermode.

3. Adjust thelight beam by moving thefocus ring (12) forwards or

backwards.

This symbol indicates that this product should not be disposed of

with general household waste. This applies throughout theentire EU.

In order to prevent any harm to theenvironment or health hazards

caused by incorrect waste disposal, theproduct must be handed in

for recycling so that thematerial can be disposed of in aresponsible

manner. When recycling your product, take it to your local collection

facility or contact theplace of purchase. They will ensure that

theproduct is disposed of in anenvironmentally sound manner.

Specifications

Charging voltage 5 V DC from aUSB charger

(USB charger sold separately)

Battery Li-ion-battery 2800 mAh (type 18650) (2 ×)

Operating time Up to 3.5 hours (on high power),

up to 6 hours (on low power)

Colour temperature 6000K

Colour rendition Ra 70

Power 10 W

Lumens 450 lm (60 sec in boost-mode),

350 lm (high power), 150 lm (low power)

Operating temperature −20 to +50ºC

Protection class IPX4

Weight Approx 325 g (battery pack, LED lamp

and headband)

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Asaklitt MF-H05 Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Asaklitt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Asaklitt MF-H05 Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Asaklitt Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Asaklitt MF-H05 Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.