Handleiding BaByliss 7491T Tondeuse

Handleiding

DIRECT DRIVE TURBO CLIPPER

The BaByliss Direct Drive is a lightweight

cord/cordless clipper with direct drive

cutting power. Its unique ‘Turbo’ feature

provides an additional burst of power to

aid cutting performance. It comes with a

range of professional accessories (some of

which can be located in the top of the lid,

under the piece of foam), perfectly

designed to create salon standard haircuts

at home. The precision stainless steel

blades give optimum performance and

the powerful, lightweight motor needs no

adjustment.

OPERATING INSTRUCTIONS

Cordless Operations

• Before using your clipper for the first

time, or if you have not used your clipper

for more than 6 months, charge it for a

full 24 hours.

• Charging: Ensure that the clipper is

switched off. Insert the small plug firmly

into the clipper, then the mains plug

(with transformer) into the wall socket.

The charging indicator light will light up

to indicate that charging has begun.

• After it has been charged the first time

and used (see «1» above), the clipper

only needs to be charged for 16 hours

to ensure a full charge. A full charge will

supply enough power for about 45 minutes

hair cutting

• If you want to keep the batteries in

good condition allow them to fully

discharge before re-charging.

Corded (Mains) Operation

• Ensure that the clipper is switched off.

Insert the small plug on the lead end

firmly into the clipper, then the mains plug

(with transformer) into the wall socket.

• Wait for about a minute, then switch on.

• The clipper can be used for 40 minutes

from the mains.

INSTRUCTIONS FOR USE

• Inspect your clipper. Make sure the blades

are free from hair and dirt, properly oiled

and running smoothly (if not see the

section headed «Maintenance»).

• Oil the blades each time you use the

clipper, whether before or after cutting.

Use only the oil supplied and gently

add a few drops onto the teeth of the

blades whilst it is operating.

• Comb the hair until it’s tangle-free,

then hold the clipper in a comfortable

grip. Only use the clipper on clean and

dry hair.

• Use the longest setting at first, until you

become familiar with the adjustments. If

you want a shorter cut, you can adjust

the comb to a shorter position and go

over the hair again until you achieve

the desired length.

ADJUSTABLE CUTTING HEAD LEVER

Just like professional clippers, the BaByliss

clippers are equipped with a 5-position

lever to adjust the cutting length while

clipping. To increase the cutting length,

slowly push the lever down; for the closest

cut, push the lever up (fig.1).

TURBO FEATURE

For an extra burst of power, push the

‘Turbo’ button on the right side of the

clipper. This will boost the motor of your

clipper, producing faster cutting action

and increased cutting power for the

more difficult cutting tasks.

USE OF THE CUTTING GUIDES

This clipper is supplied with 6 cutting

guides.

N°1 3mm

N°2 6mm

N°3 9.5mm

N°4 13mm

N°6 19mm

N°8 25mm

• To attach the combs hold them by the

teeth, slide the blade of the clipper

under the recess behind the combs

and snap onto the bottom of the clipper

blade (fig. 2).

• To remove comb attachments, hold the

tab at the base of the comb and pull

out and up (fig. 3).

HOW TO USE THE CLIPPER TO

ACHIEVE DIFFERENT HAIRCUTS

Use the largest comb attachment and

trim sides from the bottom upwards.

Hold clipper lightly against the hair with

the teeth of the comb attachment pointing

upwards, yet flat against the head.

Gradually lift the clipper upwards and

outwards through the hair, trimming just

a little at a time. The clipper works most

efficiently when it cuts through the hair at

its own speed. Never switch the clipper off

while in the hair. Repeat around the

sides and back of head.

For longer hair on top of the head,

Use the barber’s comb and lift hair on

top of the head, cutting over the comb;

or hold the hair between the fingers and

cut to the desired length. Always working

from the front to the back of the head,

gradually cut the hair shorter by reducing

the space between the comb or fingers

and the head. Comb often to check the

length.

Outlining

Requires no attachments. Comb the hair

in the desired style. Ensure that the

blade is placed against the hairline. With

the outline of the hair as your guide, slowly

move the clipper over, around and

behind the ears.

For the back of the neck and

the sideburns,

Hold the clipper upside down, and holding

it gently

against the skin at the length

desired, move downward.

T

o obtain a «Crew Cut»,

Always cut from the back of the neck to

the crown, using the longest attachment

comb. Holding it flat against the head,

slowly move the clipper up through the

hair. Use the same technique for the sides,

cutting from the bottom to the upper side

of the head. Then even it up with the sides.

For the top of the head, use the barber

comb.

MAINTENANCE

To maintain correct performance, the

blades must be regularly cleaned and

oiled. It is recommended to oil the blades

every time that the clipper is used, using

the oil provided. Never use any other

product: this oil was formulated for high

speed clippers, it does not evaporate or

slow down the blades.

The blades are removable for easy

cleaning. Always switch off and unplug

before cleaning. Remove the 2 screws

that hold the blades and detach them.

Brush away the hairs with the cleaning

brush, then reassemble. Then put the 2

screws back in place. Before tightening

the screws check that both blades are

parallel.

Remove and clean the comb attachment

after each use.

NICKEL-CADMIUM BATTERIES

This clipper contains Nickel-Cadmium

batteries.

To help protect our environment, the

Nickel-Cadmium batteries should be

removed for safe disposal at the end of

the clipper’s life.

To remove the battery pack for disposal

or recycling, please follow the procedure

below:

1. First switch the clipper off and unplug

it. Unscrew the 3 screws located at the

bottom of the clipper body.

2. Open the appliance and disconnect the

wires with cutting pliers, then remove

the batteries.

3. For environmental reasons, do not

discard the batteries with your regular

refuse. Contact your local authorities for

more details on recycling and safe

disposal facilities in your area.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je BaByliss 7491T Tondeuse. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met BaByliss. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van BaByliss 7491T Tondeuse in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor BaByliss Tondeuses
Meer handleidingen voor Tondeuses

Veelgestelde vragen over BaByliss 7491T Tondeuse

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.