Handleiding Bauknecht WATK Sense 96L6 DE N Wasdroger

Handleiding

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Anti-Stain Turbo 45’

This cycle is ideal for washing daily stains in 45’. It is ideal for mixed fabrics

and coloured garments.

Anti-Stain Power20°C

this programme ensures maximum stain removal capacity with no need

for pre-treatment at low temperatures, preserving fabrics and colours.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of

resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Specic for synthetic items. If the dirt is dicult to remove, the

temperature can be increased up to 60° and powder detergent can be

used too.

Fast 30’

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Wash & Dry Mix

use programme 6 to wash and dry mixed garments (cotton and

synthetics). This cycle may be used to wash and dry loads of up to 3.5 kg;

we recommend the use of liquid detergent.

The use of the steam in this programme is optimised to reduce the

formation of creases on garments, making them easier to iron.

Shirts Wash & Dry

Use programme 7 to wash and dry shirts and T-shirts in dierent fabrics

and colours to ensure maximum care. This cycle may be used to wash and

dry loads of up to 2 kg. To achieve optimum results, use liquid detergent

and pre-treat cus, collars and stains. The use of the steam in this

programme is optimised to reduce the formation of creases on garments,

making them easier to iron.

Wool - Woolmark Apparel Care - Green:

the wool wash cycle of this machine has been approved

by The Woolmark Company for the washing of wool

garments labelled as “hand wash” provided that the

products are washed according to the instructions on the

garment label and those issued by the manufacturer of

this washer-dryer. (M1318)

Eco 40-60

For washing normally soiled cotton garments declared to be washable at 40 °C

or 60 °C, together in the same cycle. This is the standard cotton programme

and the most ecient in terms of water and energy consumption.

20°C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Whites

For heavily soiled whites and resistant colours.

Anti-Allergy

Suitable for removing major allergens such as pollen, mites and cat or

dog hair.

Steam Refresh

For refreshing garments, neutralised unpleasant odours and relaxing the

bres by delivering steam into the drum. The garments will be damp at

the end of the cycle.

Ultra Delicates

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on

delicate garments.

We recommend turning the garments inside out before washing and

placing small items into the special bag for washing delicates. Use liquid

detergent on delicate garments for best results.

When selecting an exclusively time-based drying function, a drying cycle

is performed at the end of the wash cycle that is particularly delicate,

thanks to light handling and appropriate temperature control of the

water jet.

The recommended durations are:

1 kg of synthetic garments --> 165 min

1 kg of synthetic and cotton garments --> 180 min

1 kg of cotton garments --> 180 min

The degree of dryness depends on the load and fabric composition.

Rinse

Designed for rinsing and spinning.

Spin + Pump out

Designed for spinning and draining the water.

Eco Cotton

For washing normally soiled cotton garments at 60°C.

DISPLAY

The display is useful when programming the machine and provides a

great deal of information.

The following will appear in area A: the icon and programme selected, the

washing and drying phases and time remaining to the end of the cycle.

Area B will include the two intensity levels relative to the DIRECT

INJECTION option. The indicator lights relative to the available functions

appear in area C. Area D will display the time remaining to the start of the

selected cycle if the DELAY TIMER function was set.

Area E will display the maximum available spin speed on the basis of the

set cycle; if the cycle does not include the spin cycle setting, the dimly lit

“--” symbol will appear in the area.

Area F will show the temperature value that can be selected on the basis

of the set cycle.

If the cycle does not include setting of the temperature, the dimly lit “--”

symbol will appear in the area.

! The rst time the machine is switched on, you will be asked to select the

language and the display will automatically show the language selection

menu.

To select the desired language press the X and Y buttons; to conrm the

selection press the Z button.

To change the language switch o the machine and press buttons G, H, I

simultaneously until an alarm is heard: the language-selection menu will

be displayed again.

! To change the display luminosity, which by default is set to the highest

value, switch the machine o then simultaneously press buttons G, L and

M until the buzzer sounds.

Press buttons X and Y to choose the desired level of luminosity then

conrm by pressing button Z.

! During the wash cycle or when the DELAY TIMER function has been

enabled, if the user does not interact with the display for 1 minute the

SCREEN SAVER activates. To return to the previous window, simply press

any button.

LOCKED DOOR INDICATOR

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst

time, run a wash cycle with detergent and no laundry, by setting the “Auto

Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; “BAUKNECHT” will appear on the display;

the indicator light relative to the START/PAUSE button will ash slowly.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- Use the WASH CYCLE selector knob to select the desired wash cycle: the

cycle’s name will appear on the display; the cycle will be associated with a

specic temperature and spin speed which can be modied. The duration

of the cycle will appear on the display.

- Modify the temperature and/or spin speed: the machine automatically

selects the maximum temperature and spin speed set for the selected

wash cycle; these values cannot therefore be increased. Pressing the

button gradually reduces the temperature down to the cold wash setting

(the “--” symbol will appear on the display). Pressing the button

gradually reduces the spin speed until it is completely excluded (the “--”

symbol will appear on the display). Pressing the buttons further restores

the maximum allowed values for the selected cycle.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady and the door will lock ( symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash. To start the wash cycle from the point at which it

was interrupted, press the START/PAUSE button again.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the relative indicator light will ash),

then select the desired cycle and press the START/PAUSE button

again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “CYCLE END” on the display; when the

symbol switches o, the door may be opened. Open the door and

switch o the machine. If you do not press ON/OFF button, the

washing machine will switch o automatically after about a 10 minutes.

Close the water tap and unload the washing machine. Leave the door ajar

to allow the drum to dry.

2:55

90°

1200

-- h

--

BUNTWÄSCHE

H

G

Y

X Z

I

L M

A

B

C

C

D

E

C

F

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Bauknecht WATK Sense 96L6 DE N Wasdroger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Bauknecht. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Bauknecht WATK Sense 96L6 DE N Wasdroger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Bauknecht Wasdrogers
Meer handleidingen voor Wasdrogers

Veelgestelde vragen over Bauknecht WATK Sense 96L6 DE N Wasdroger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Bauknecht TRK Excellence 7 Wasdroger

Handleiding

Bauknecht TRKA Eco 580 Wasdroger

Handleiding

Bauknecht TRKK 7846 Wasdroger

Handleiding

Bauknecht TRKA Eco 4590 Wasdroger

Handleiding

Bauknecht TRWP 7700 Wasdroger

Handleiding

Bauknecht TRKK 6631/6 Wasdroger

Handleiding

Bauknecht WATK Sense 86G4 DE Wasdroger

Handleiding

Bauknecht TRKK Prestige Wasdroger

Gerelateerde categorieën